Global Switch Management Protocol version 3 (GSMPv3) Failure Response Message Name Space
2002-03-28
2011-08-11
Failure Response Message Names
0-59
IETF Review
60-79
Reserved for Vendor Private Extensions
80-127
IETF Review
128-159
Reserved for Vendor Private Extensions
160-255
IETF Review
0
Reserved
1
Unspecified reason not covered by other failure codes.
2
Invalid request message.
3
The specified request is not implemented on this switch.
4
One or more of the specified ports does not exist.
5
Invalid Port Session Number.
6
One or more of the specified ports is down.
7
Invalid Partition ID.
8-9
Unassigned
10
General message failure. (The meaning of this
failure code depends upon the Message Type. It is
defined within the description of any message that
uses it.)
11
The specified connection does not exist
12
The specified branch does not exist.
13
One or more of the specified Input Labels is invalid
14
One or more of the specified Output Labels is invalid.
15
Point-to-point bi-directional connection already exists.
16
Invalid service selector field in a connection
management message.
17
Insufficient resources for QoS profile.
18
Insufficient resources.
19
Out of resources (e.g. memory exhausted, etc.).
20
Reservation ID out of Range
21
Mismatched reservation ports
22
Reservation ID in use
23
Non-existent reservation ID
24
ATM virtual path switching is not supported on
this input port.
25
Point-to-multipoint ATM virtual path connections
are not supported on either the requested input
port or the requested output port.
26
Attempt to add an ATM virtual path connection
branch to an existing virtual channel connection.
27
Attempt to add an ATM virtual channel connection
branch to an existing virtual path connection.
28
ATM Virtual Path switching is not supported on
non-ATM ports.
29
A branch belonging to the specified point-to-
multipoint connection is already established on the
specified output port and the switch cannot support
more than a single branch of any point-to-multipoint
connection on the same output port.
30
The limit on the maximum number of point-to-
multipoint connections that the switch can support
has been reached.
31
The limit on the maximum number of branches that
the specified point-to-multipoint connection can
support has been reached.
32
Cannot label each output branch of a point-to-multipoint
tree with a different label.
33
Cannot add multi-point branch to bi-directional
connection.
34
Unable to assign the requested Label value to the
requested branch on the specified point-to-multipoint
connection.
35
General problem related to the manner in which
point-to-multipoint is supported by the switch.
36
Replace of connection is not activated on switch.
37
Connection replacement mode cannot be combined
with Bi-directional or Multicast mode.
40
Cannot support one or more requested label ranges.
41
Cannot support disjoint label ranges.
42
Specialised multipoint labels not supported.
43
The transmit data rate of this output port cannot
be changed.
44
Requested transmit data rate out of range for this
output port.
45
Connection Replace mechanism not supported on switch.
46
Labels are still used in the existing Label Range.
47-59
Unassigned
60-79
Reserved for Vendor Private Extensions
80
Switch does not support different QoS parameters
for different branches within a multipoint connection.
81-127
Unassigned
128-159
Reserved for Vendor Private Extensions
160-255
Unassigned