module ietf-system-capabilities {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-system-capabilities";
prefix sysc;
import ietf-netconf-acm {
prefix nacm;
reference
"RFC 8341: Network Configuration Access Control Model";
}
import ietf-yang-library {
prefix yanglib;
description
"This module requires ietf-yang-library to be implemented.
Revision 2019-01-04 or a revision derived from it
is REQUIRED.";
reference
"RFC8525: YANG Library";
}
organization
"IETF NETCONF (Network Configuration) Working Group";
contact
"WG Web:
WG List:
Editor: Balazs Lengyel
";
description
"This module specifies a structure to specify system
capabilities for a server or a publisher. System capabilities
may include capabilities of a NETCONF or RESTCONF server or a
notification publisher.
This module does not contain any specific capabilities; it only
provides a structure where containers containing the actual
capabilities are augmented in.
Capability values can be specified at the system level, at the
datastore level (by selecting all nodes in the datastore), or
for specific data nodes of a specific datastore (and their
contained subtrees).
Capability values specified for a specific datastore or
node-set override values specified on the system/publisher
level.
The same grouping MUST be used to define hierarchical
capabilities supported both at the system level and at the
datastore/data-node level.
To find a capability value for a specific data node in a
specific datastore, the user SHALL:
1) search for a datastore-capabilities list entry for
the specific datastore. When stating a specific capability, the
relative path for any specific capability must be the same
under the system-capabilities container and under the
per-node-capabilities list.
2) If the datastore entry is found within that entry, process
all per-node-capabilities entries in the order they appear in
the list. The first entry that specifies the specific
capability and has a node-selector selecting the specific data
node defines the capability value.
3) If the capability value is not found above and the specific
capability is specified under the system-capabilities container
(outside the datastore-capabilities list), this value shall be
used.
4) If no values are found in the previous steps, the
system/publisher is not capable of providing a value. Possible
reasons are that it is unknown, the capability is changing for
some reason, there is no specified limit, etc. In this case,
the system's behavior is unspecified.
The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL',
'SHALL NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED',
'NOT RECOMMENDED', 'MAY', and 'OPTIONAL' in this document
are to be interpreted as described in BCP 14 (RFC 2119)
(RFC 8174) when, and only when, they appear in all
capitals, as shown here.
Copyright (c) 2022 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject to
the license terms contained in, the Revised BSD License set
forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(https://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC 9196
(https://www.rfc-editor.org/info/rfc9196); see the RFC itself
for full legal notices.";
revision 2022-02-17 {
description
"Initial version";
reference
"RFC 9196: YANG Modules Describing Capabilities for Systems
and Datastore Update Notifications";
}
container system-capabilities {
config false;
description
"System capabilities.
Capability values specified here at the system level
are valid for all datastores and are used when the
capability is not specified at the datastore level
or for specific data nodes.";
/*
* "Augmentation point for system-level capabilities."
*/
list datastore-capabilities {
key "datastore";
description
"Capabilities values per datastore.
For non-NMDA servers/publishers, 'config false' data is
considered as if it were part of the running datastore.";
leaf datastore {
type leafref {
path
"/yanglib:yang-library/yanglib:datastore/yanglib:name";
}
description
"The datastore for which capabilities are defined.
Only one specific datastore can be specified,
e.g., ds:conventional must not be used, as it
represents a set of configuration datastores.";
}
list per-node-capabilities {
description
"Each list entry specifies capabilities for the selected
data nodes. The same capabilities apply to the data nodes
in the subtree below the selected nodes.
The system SHALL order the entries according to their
precedence. The order of the entries MUST NOT change
unless the underlying capabilities also change.
Note that the longest patch matching can be achieved
by ordering more specific matches before less
specific ones.";
choice node-selection {
description
"A method to select some or all nodes within a
datastore.";
leaf node-selector {
type nacm:node-instance-identifier;
description
"Selects the data nodes for which capabilities are
specified. The special value '/' denotes all data
nodes in the datastore, consistent with the path
leaf node on page 41 of [RFC8341].";
reference
"RFC 8341: Network Configuration Access Control Model";
}
}
/*
* "Augmentation point for datastore- or data-node-level
* capabilities."
*/
}
}
}
}