Skip to main content

Interworking SIP and Intelligent Network (IN) Applications
RFC 3976

Document Type RFC - Informational (January 2005)
Authors F Haerens , Vidhi Rastogi , Vijay K. Gurbani
Last updated 2015-10-14
RFC stream Independent Submission
Formats
IESG Responsible AD Allison J. Mankin
Send notices to (None)
RFC 3976
Network Working Group                                      V. K. Gurbani
Request for Comments: 3976                     Lucent Technologies, Inc.
Category: Informational                                       F. Haerens
                                                            Alcatel Bell
                                                              V. Rastogi
                                                      Wipro Technologies
                                                            January 2005

       Interworking SIP and Intelligent Network (IN) Applications

Status of This Memo

   This memo provides information for the Internet community.  It does
   not specify an Internet standard of any kind.  Distribution of this
   memo is unlimited.

Copyright Notice

   Copyright (C) The Internet Society (2005).

IESG Note

   This RFC is not a candidate for any level of Internet Standard.  The
   IETF disclaims any knowledge of the fitness of this RFC for any
   purpose, and in particular notes that the decision to publish is not
   based on IETF review for such things as security, congestion control,
   or inappropriate interaction with deployed protocols.  The RFC Editor
   has chosen to publish this document at its discretion.  Readers of
   this document should exercise caution in evaluating its value for
   implementation and deployment.  See RFC 3932 for more information.

Abstract

   Public Switched Telephone Network (PSTN) services such as 800-number
   routing (freephone), time-and-day routing, credit-card calling, and
   virtual private network (mapping a private network number into a
   public number) are realized by the Intelligent Network (IN).  This
   document addresses means to support existing IN services from Session
   Initiation Protocol (SIP) endpoints for an IP-host-to-phone call.
   The call request is originated on a SIP endpoint, but the services to
   the call are provided by the data and procedures resident in the
   PSTN/IN.  To provide IN services in a transparent manner to SIP
   endpoints, this document describes the mechanism for interworking SIP
   and Intelligent Network Application Part (INAP).

Gurbani, et al.              Informational                      [Page 1]
RFC 3976                 Interworking SIP & IN              January 2005

Table of Contents

   1.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . .  2
   2.  Access to IN-Services from a SIP Entity. . . . . . . . . . . .  4
   3.  Additional SIN Considerations  . . . . . . . . . . . . . . . .  7
       3.1.  The Concept of State in SIP. . . . . . . . . . . . . . .  7
       3.2.  Relationship between SCP and a SIN-Enabled SIP entity. .  7
       3.3.  SIP REGISTER and IN services . . . . . . . . . . . . . .  8
       3.4.  Support of Announcements and Mid-Call Signaling. . . . .  8
   4.  The SIN Architecture . . . . . . . . . . . . . . . . . . . . .  8
       4.1.  Definitions. . . . . . . . . . . . . . . . . . . . . . .  8
       4.2.  IN Service Control Based on the SIN Approach . . . . . .  9
   5.  Mapping of the SIP State Machine to the IN State Model . . . . 10
       5.1.  Mapping SIP Protocol State Machine to O_BCSM . . . . . . 11
       5.2.  Mapping SIP Protocol State Machine to T_BCSM . . . . . . 16
   6.  Example Call Flows . . . . . . . . . . . . . . . . . . . . . . 20
   7.  Security Considerations  . . . . . . . . . . . . . . . . . . . 21
   8.  References . . . . . . . . . . . . . . . . . . . . . . . . . . 21
       8.1.  Normative References . . . . . . . . . . . . . . . . . . 21
       8.2.  Informative References . . . . . . . . . . . . . . . . . 22
       Appendix A . . . . . . . . . . . . . . . . . . . . . . . . . . 23
       Acknowledgments. . . . . . . . . . . . . . . . . . . . . . . . 24
       Author's Addresses . . . . . . . . . . . . . . . . . . . . . . 24
       Full Copyright Statement . . . . . . . . . . . . . . . . . . . 25

1.  Introduction

   PSTN services such as 800-number routing (freephone), time-and-day
   routing, credit-card calling, and virtual private network (mapping a
   private network number into a public number) are realized by the
   Intelligent Network.  IN is an architectural concept for the real-
   time execution of network services and customer applications [1].  IN
   is, by design, de-coupled from the call processing component of the
   PSTN.  In this document, we describe the means to leverage this
   decoupling to provide IN services from SIP-based entities.

   First, we will explain the basics of IN.  Figure 1 shows a simplified
   IN architecture, in which telephone switches called Service Switching
   Points (SSPs) are connected via a packet network called Signaling
   System No. 7 (SS7) to Service Control Points (SCPs), which are
   general purpose computers.  At certain points in a call, a switch can
   interrupt a call and request instructions from an SCP on how to
   proceed with the call.  The points at which a call can be interrupted
   are standardized within the Basic Call State Model (BCSM) [1, 2].
   The BCSM models contain two processes, one each for the originating
   and terminating part of a call.

Gurbani, et al.              Informational                      [Page 2]
RFC 3976                 Interworking SIP & IN              January 2005

   When the SCP receives a request for instructions, it can reply with a
   single response, such as a simple number translation augmented by
   criteria like time of day or day of week, or, in turn, initiate a
   complex dialog with the switch.  The situation is further complicated
   by the necessity to engage other specialized devices that collect
   digits, play recorded announcements, perform text-to-speech or
   speech-to-text conversions, etc.  (These devices are not discussed
   here.)  The related protocol, as well as the BCSM, is standardized by
   the ITU-T and known as the Intelligent Network Application Part
   protocol (INAP) [4].  Only the protocol, not an SCP API, has been
   standardized.

                          +-----------+
                          |           |
                          |    SCP    |
                          |           |
                          +-----------+
                                ||
                                ||
                               /  \
                              /    \
                             / INAP \
                            /        \
                           /          \
                  +--------+  ISUP   +--------+
                  |  SSP   |*********|  SSP   |
                  +--------+         +--------+

                  Figure 1.  Simplified IN Architecture

   The overall objective is to ensure that IN control of Voice over IP
   (VoIP) services in networks can be readily specified and implemented
   by adapting standards and software used in the present networks.
   This approach leads to services that function the same when a user
   connects to present or future networks, simplifies service evolution
   from present to future, and leads to more rapid implementation.

   The rest of this document is organized as follows: Section 2 contains
   the architectural model of an IN aware SIP entity.  Section 3
   provides some issues to be taken into account when performing SIP/IN
   interworking (SIN).  Section 4 discusses the IN service control based
   on the SIN approach.  The technique outlined in this document focuses
   on the call models of IN and the SIP protocol state machine; Section
   5 thus establishes a complete mapping between the two state machines
   that allows access to IN services from SIP endpoints.  Section 6
   includes call flows of IN services executing on SIP endpoints.  These
   services are readily enabled by the technique described in this
   document.  Finally, Section 7 covers security aspects of SIN.

Gurbani, et al.              Informational                      [Page 3]
RFC 3976                 Interworking SIP & IN              January 2005

List of Acronyms

   B2BUA       Back-to-Back User Agent
   BCSM        Basic Call State Model
   CCF         Call Control Function
   DP          Detection Point
   DTMF        Dual Tone Multi-Frequency
   IN          Intelligent Network
   INAP        Intelligent Network Application Part
   IP          Internet Protocol
   ITU-T       International Telecommunications Union -
               Telecommunications Standardization Sector
   O_BCSM      Originating Basic Call State Model
   PIC         Point in Call
   PSTN        Public Switched Telephone Network
   RTP         Real Time Protocol
   R-URI       Request URI
   SCF         Service Control Function
   SCP         Service Control Point
   SIGTRAN     Signal Transport Working Group in IETF
   SIN         SIP/IN Interworking
   SIP         Session Initiation Protocol
   SS7         Signaling System  No. 7
   SSF         Service Switching Function
   SSP         Service Switching Point
   T_BCSM      Terminating Basic Call State Model
   UA          User Agent
   UAC         User Agent Client
   UAS         User Agent Server
   VoIP        Voice over IP
   VPN         Virtual Private Network

2.  Access to IN-Services from a SIP Entity

   The intent of this document is to provide the means to support
   existing IN-based applications in a SIP [3] environment.  One way to
   gain access to IN services transparently from SIP (e.g., through the
   same detection points (DPs) and point-in-call (PIC) used by
   traditional switches) is to map the SIP protocol state machine to the
   IN call models [1].

   From the viewpoint of IN elements such as the SCP, the request's
   origin from a SIP entity rather than a call processing function on a
   traditional switch is immaterial.  Thus, it is important that the SIP
   entity be able to provide the same features as the traditional
   switch, including operating as an SSP for IN features.  The SIP
   entity should also maintain call state and trigger queries to IN-
   based services, as do traditional switches.

Gurbani, et al.              Informational                      [Page 4]
RFC 3976                 Interworking SIP & IN              January 2005

   This document does not intend to specify which SIP entity shall
   operate as an SSP; however, for the sake of completeness, it should
   be mentioned that this task should be performed by SIP entities at
   (or near) the core of the network rather than at the SIP end points
   themselves.  To that extent, SIP entities such as proxy servers and
   Back-to-Back user agents (B2BUAs) may be employed.  Generally
   speaking, proxy servers can be used for IN services that occur during
   a call setup and teardown.  For IN services requiring specialized
   media handling (such as DTMF detection) or specialized call control
   (such as placing parties on hold) B2BUAs will be required.

   The most expeditious manner for providing existing IN services in the
   IP domain is to use the deployed IN infrastructure as often as
   possible.  In SIP, the logical point to tap into for accessing
   existing IN services is either the user agents or one of the proxies
   physically closest to the user agent (and presumably in the same
   administrative domain).  However, SIP entities do not run an IN call
   model; to access IN services transparently, the trick then is to
   overlay the state machine of the SIP entity with an IN layer so that
   call acceptance and routing is performed by the native state machine
   and so that services are accessed through the IN layer by using an IN
   call model.  Such an IN-enabled SIP entity, operating in synchrony
   with the events occurring at the SIP transaction level and
   interacting with the IN elements (SCP), is depicted in Figure 2:

                        +-------+
                        | SCP   |
                        +---+---+
                            |
                            | INAP
                            |
                        +--------+
                        | SIN    |
                        +........+
                        |  SIP   |
             ---------->| Entity |--------->
             Requests   |        | Requests out
             in         +--------+ (after applying IN
                                    services)

            SIN: SIP/IN Interworking layer

            Figure 2.  SIP Entity Accessing IN Services

   Section 5 proposes this mapping between the IN layer and the SIP
   protocol state machine.  Essentially, a SIP entity exhibiting this
   mapping becomes a SIN-enabled SIP entity.

Gurbani, et al.              Informational                      [Page 5]
RFC 3976                 Interworking SIP & IN              January 2005

   This document does not propose any extensions to SIP.

   Figure 3 expands the SIP entity depicted in Figure 2 and further
   details the architecture model involving IN and SIP interworking.
   Events occurring at the SIP layer will be passed to the IN layer for
   service application.  More specifically, since IN services deal with
   E.164 numbers, it is reasonable to assume that a SIN-enabled SIP
   entity that seeks to provide services on such a number will consult
   the IN layer for further processing, thus acting as a SIP-based SSP.
   The IN layer will proceed through its BCSM states and, at appropriate
   points in the call, will send queries to the SCP for call
   disposition.  Once the disposition of the call has been determined,
   the SIP layer is informed and processes the transaction accordingly.

   Note that the single SIP entity as modeled in this figure can in fact
   represent several different physical instances in the network as, for
   example, when one SIP entity is in charge of the terminal or access
   network/domain, and another is in charge of the interface to the
   Switched Circuit Network (SCN).

                  +-------+
                  |  SCP  |
                  +---o---+
                      |
                      +-----+
                            |
                  **********|***********************************
                  * +-------|-------------------+              *
                  * |+------o------+            |              *
                  * ||  SSF(IP)    |            |              *
                  * |+-------------+            |              *
                  * ||  CCF(IP)    |            |              *
                  * |+------o------+            |              *
                  * +-------|-------------------+              *
                  *         |                      SIN-enabled *
                  * +-------o-------------------+  SIP         *
                  * |      SIP Layer            |  Entity      *
                  * +---------------------------+              *
                  **********************************************

     Figure 3.  Functional Architecture of a SIN-Enabled SIP Entity

   The following architecture entities, used in Figure 3, are defined in
   the Intelligent Network standards:

         Service Switching Function (SSF): IN functional entity that
         interacts with call control functions.

Gurbani, et al.              Informational                      [Page 6]
RFC 3976                 Interworking SIP & IN              January 2005

         Call Control Function (CCF): IN functional entity that refers
         to call and connection handling in the classical sense (i.e.,
         that of an exchange).

3.  Additional SIN Considerations

   In working between Internet Telephony and IN-PSTN networks, the main
   issue is to translate between the states produced by the Internet
   Telephony signaling and those used in traditional IN environments.
   Such a translation entails attention to the considerations listed
   below.

3.1.  The Concept of State in SIP

   IN services occur within the context of a call, i.e., during call
   setup, call teardown, or in the middle of a call.  SIP entities such
   as proxies, with which some of these services may be realized,
   typically run in transaction-stateful (or stateless) mode.  In this
   mode, a SIP proxy that proxied the initial INVITE is not guaranteed
   to receive a subsequent request, such as a BYE.  Fortunately, SIP has
   primitives to force proxies to run in a call-stateful mode; namely,
   the Record-Route header.  This header forces the user agent client
   (UAC) and user agent server (UAS) to create a "route set" that
   consists of all intervening proxies through which subsequent requests
   must traverse.  Thus SIP proxies must run in call-stateful mode in
   order to provide IN services on behalf of the UAs.

   A B2BUA is another SIP element in which IN services can be realized.
   As a B2BUA is a true SIP UA, it maintains complete call state and is
   thus capable of providing IN services.

3.2.  Relationship between SCP and a SIN-Enabled SIP Entity

   In the architecture model proposed in this document, each SIN-enabled
   SIP entity is pre-configured to communicate with one logical SCP
   server, using whatever communication mechanism is appropriate.
   Different SIP servers (e.g., those in different administrative
   domains) may communicate with different SCP servers, so that there is
   no single SCP server responsible for all SIP servers.

   As Figures 1 and 2 depict, the IN-portion of the SIN-enabled SIP
   entity will communicate with the SCP.  This interface between the IN
   call handling layer and the SCP is not specified by this document
   and, indeed, can be any one of the following, depending on the
   interfaces supported by the SCP: INAP over IP, INAP over SIGTRAN, or
   INAP over SS7.

Gurbani, et al.              Informational                      [Page 7]
RFC 3976                 Interworking SIP & IN              January 2005

   This document is only applicable when SIP-controlled Internet
   telephony devices seek to operate with PSTN devices.  The SIP UAs
   using this interface would typically appear together with a media
   gateway.  This document is *not* applicable in an all-IP network and
   is not needed in cases where PSTN media gateways (not speaking SIP)
   need to communicate with SCPs.

3.3.  SIP REGISTER and IN Services

   SIP REGISTER provisions a SIP Proxy or SIP Registration server.  The
   process is similar to the provisioning of an SCP/HLR in the switched
   circuit network.  SCPs that provide VoIP based services can leverage
   this information directly.  However, this document neither endorses
   nor prohibits such an architecture and, in fact, considers it an
   implementation decision.

3.4.  Support of Announcements and Mid-Call Signaling

   Services in the IN such as credit-card calling typically play
   announcements and collect digits from the caller before a call is set
   up.  Playing announcements and collecting digits require the
   manipulation of media streams.  In SIP, proxies do not have access to
   the media data path.  Thus, such services should be executed in a
   B2BUA.

   Although the SIP specification [3] allows for end points to be put on
   hold during a call or for a change of media streams to take place, it
   does not have any primitives to transport other than mid-call control
   information.  This may include transporting DTMF digits, for example.
   Extensions to SIP, such as the INFO method [5] or the SIP event
   notification extension [6], can be considered for services requiring
   mid-call signaling.  Alternatively, DTMF can be transported in RTP
   itself [7].

4.  The SIN Architecture

4.1.  Definitions

   The SIP architecture has the following functional elements defined in
   [3]:

      -  User agent client (UAC): The SIP functional entity that
         initiates a request.

      -  User agent server (UAS): The SIP functional entity that
         terminates a request by sending 0 or more provisional SIP
         responses and one final SIP response.

Gurbani, et al.              Informational                      [Page 8]
RFC 3976                 Interworking SIP & IN              January 2005

      -  Proxy server: An intermediary SIP entity that can act as both a
         UAS and a UAC.  Acting as a UAS, it accepts requests from UACs,
         rewrites the Request-URI (R-URI), and, acting as a UAC, proxies
         the request to a downstream UAS.  Proxies may retain
         significant call control state by inserting themselves in
         future SIP transactions beyond the initial INVITE.

      -  Redirect server: An intermediary SIP entity that redirects
         callers to alternate locations, after possibly consulting a
         location server to determine the exact location of the callee
         (as specified in the R-URI).

      -  Registrar: A SIP entity that accepts SIP REGISTER requests and
         maintains a binding from a high-level URL to the exact location
         for a user.  This information is saved in some data-store that
         is also accessible to a SIP Proxy and a SIP Redirect server.  A
         Registrar is usually co-located with a SIP Proxy or a SIP
         Redirect server.

      -  Outbound proxy: A SIP proxy located near the originator of
         requests.  It receives all outgoing requests from a particular
         UAC, including those requests whose R-URIs identify a host
         other than the outbound proxy.  The outbound proxy sends these
         requests, after any local processing, to the address indicated
         in the R-URI.

      -  Back-to-Back UA (B2BUA): A SIP entity that receives a request
         and processes it as a UAS.  It also acts as a UAC and generates
         requests to determine how the incoming request is to be
         answered.  A B2BUA maintains complete dialog state and must
         participate in all requests sent within the dialog.

4.2.  IN Service Control Based on the SIN Approach

   Figure 4 depicts the possibility of IN service control based on the
   SIN approach.  On both the originating and terminating ends, a SIN-
   capable SIP entity is assumed (it can be a proxy or a B2BUA).  The "O
   SIP" entity is required for outgoing calls that require support for
   existing IN services.  Likewise, on the callee's side (or terminating
   side), an equally configured entity ("T SIP") will be required to
   provide terminating side services.  Note that the "O SIP" and "T SIP"
   entities correspond, respectively, to the IN O_BCSM and T_BCSM halves
   of the IN call model.

Gurbani, et al.              Informational                      [Page 9]
RFC 3976                 Interworking SIP & IN              January 2005

     +---+                                                       +---+
     | S |                    (~~~~~~~~~~~~~)                    | S |
     | C |<--+               (               )               +-->| C |
     | P |   |              (                 )              |   | P |
     +---+   |             (   Switched        )             |   +---+
             |             (   Circuit         )             |
             V             (   Network         )             V
      +-------+            (                   )          +-------+
      | SIN   |    +---------+           +---------+      | SIN   |
      +-------+----| Gateway |    ...    | Gateway |------+-------+
      | O SIP |    +---------+           +---------+      | T SIP |
      +-------+             (                 )           +-------+
                             (               )
                              (.............)

     O SIP: Originating SIP entity
     T SIP: Terminating SIP entity

     Figure 4.  Overall SIN Architecture

5.  Mapping of the SIP State Machine to the IN State Model

   This section establishes the mapping of the SIP protocol state
   machine to the IN generic basic call state model (BCSM) [2],
   independent of any capability sets [8, 9].  The BCSM is divided into
   two halves: an originating call model (O_BCSM) and a terminating call
   model (T_BCSM).  There are a total of 19 PICs and 35 DPs between both
   the halves (11 PICs and 21 DPs for O_BCSM; 8 PICs and 14 DPs for
   T_BCSM) [1].  The SSPs, SCPs, and other IN elements track a call's
   progress in terms of the basic call model.  The basic call model
   provides a common context for communication about a call.

   O_BCSM has 11 PICs:

   O_NULL: Starting state; call does not exist yet.
   AUTH_ORIG_ATTEMPT: Switch detects a call setup request.
   COLLECT_INFO: Switch collects the dial string from the calling party.
   ANALYZE_INFO: Complete dial string is translated into a routing
      address.
   SELECT_ROUTE: Physical route is selected, based on the routing
      address.
   AUTH_CALL_SETUP: Switch ensures the calling party is authorized to
      place the call.
   CALL_SENT: Control of call sent to terminating side.
   O_ALERTING: Switch waits for the called party to answer.
   O_ACTIVE: Connection established; communications ensue.
   O_DISCONNECT: Connection torn down.
   O_EXCEPTION: Switch detects an exceptional condition.

Gurbani, et al.              Informational                     [Page 10]
RFC 3976                 Interworking SIP & IN              January 2005

   T_BCSM has 8 PICS:

   T_NULL: Starting state; call does not exist yet.
   AUTH_TERM_ATT: Switch verifies whether the call can be sent to
      terminating party.
   SELECT_FACILITY: Switch picks a terminating resource to send the call
      on.
   PRESENT_CALL: Call is being presented to the called party.
   T_ALERTING: Switch alerts the called party, e.g., by ringing the
      line.
   T_ACTIVE: Connection established; communications ensue.
   T_DISCONNECT: Connection torn down.
   T_EXCEPTION: Switch detects an exceptional condition.

   The state machine for O_BCSM and T_BCSM is provided in [1] on pages
   98 and 103, respectively.  This state machine will be used for
   subsequent discussion when the IN call states are mapped into SIP.

   The next two sections contain the mapping of the SIP protocol state
   machine to the IN BCSMs.  Explaining all PICs and DPs in an IN call
   model is beyond the scope of this document.  It is assumed that the
   reader has some familiarity with the PICs and DPs of the IN call
   model.  More information can be found in [1].  For a quick reference,
   Appendix A contains a mapping of the DPs to the SIP response codes as
   discussed in the next two sections.

5.1.  Mapping SIP Protocol State Machine to O_BCSM

   The 11 PICs of O_BCSM come into play when a call request (SIP INVITE
   message) arrives from an upstream SIP client to an originating SIN-
   enabled SIP entity running the IN call model.  This entity will
   create an O_BCSM object and initialize it in the O_NULL PIC.  The
   next seven IN PICs -- O_NULL, AUTH_ORIG_ATT, COLLECT_INFO,
   ANALYZE_INFO, SELECT_ROUTE, AUTH_CALL_SETUP, and CALL_SENT -- can all
   be mapped to the SIP "Calling" state.

   Figure 5 provides a visual map from the SIP protocol state machine to
   the originating half of the IN call model.  Note that control of the
   call shuttles between the SIP protocol machine and the IN O_BCSM call
   model while it is being serviced.

Gurbani, et al.              Informational                     [Page 11]
RFC 3976                 Interworking SIP & IN              January 2005

            SIP                                      O_BCSM

           | INVITE
           V
      +---------+                        +---------------+
      | Calling +=======================>+ O_NULL        +<----+
      +--+---/\-+                        +-/\---+--------+     |
      |  |   ||    +-------------+         |    |              |
      |  |   ||<===+O_Exception  +---------+ +--V-+         +--+-+
      |  |   ||    +--/\---------+           |DP 1|         |DP21|
      |  |   ||       |    +----+      +-----+----+------+  +--+-+
      |  |   ||       +<---+DP 2|<-----+ Auth_Orig._Att  +---->+
      |  |   ||       |    +----+      +--------+--------+     |
      |  |   ||       |                         |              |
      |  |   ||       |                      +--V-+            |
      |  |   ||       |                      |DP 3|            |
      |  |   ||       |    +----+      +-----+----+------+     |
      |  |   ||       +<---+DP 4|<-----+ Collect_Info    +---->+
      |  |   ||       |    +----+      +--------+--------+     |
      |  |   ||       |                         |              |
      |  |   ||       |                      +--V-+            |
      |  |   ||       |                      |DP 5|            |
      |  |   ||       |    +----+      +-----+----+------+     |
      |  |   ||       +<---+DP 6|<-----+ Analyze_Info    +---->+
      |  |   ||       |    +----+      +--------+--------+     |
      |  |   ||       |                         |              |
      |  |   ||       |                      +--V-+            |
      |  |   ||       |                      |DP 7|            |
      |  |   ||       |    +----+      +-----+----+------+     |
      |  |   ||       +<---+DP 8|<-----+ Select_Route    +---->+
      |  |   ||       |    +----+      +--------+--------+     |
      |  |   ||       |                         |              |
      |  |   ||       |                      +--V-+            |
      |  |   ||       |                      |DP 9|            |
      |  |   ||       |    +----+      +-----+----+------+     |
      |  |   ||       +<---+DP10|<-----+ Auth._Call_Setup+---->+
      |  |   ||            +----+      +--------+--------+
 +----+  |   ||                                 |
 |       |   ||                              +--V-+
 |       |   ||                              |DP11|
 |   1xx |   ||                        +-----+----+------+
 |       |   ++========================+ Call_Sent       |
 |       |                             +----/\----+------+
 |       |     On 100,180,2xx process DP14  ||      |
 |       |     On 3xx, process DP12         ||      |
 |       V     On 486, process DP13         ||      |
 |    +--+-------+ On 5xx, 6xx and 4xx      ||      |
 |    |Proceeding| (except 486) process DP21||      |

Gurbani, et al.              Informational                     [Page 12]
RFC 3976                 Interworking SIP & IN              January 2005

 |    +-+-+------+<=========================++      |
 |      | |                                         |
 |      | |                                         |
 |      | |                                         |
 |      | +--200------------------+                 |
 |      +----4xx to 6xx--------+  |                 |
 |                             |  |              +--V-+
 | On DPs 21, 2, 4, 6, 8, 10   |  |              |DP14|
 | send 4xx-6xx final response |  |     +--------+----+--+
 +-------+                     |  |     | O_Alerting     |
         |                     |  |     +---------+------+
      +--V-------+             |  |               |
      |Completed |<------------+  |            +--V-+
      +--+-------+                |            |DP16|
         |                        |     +------+----+----+
      +--V-------+                |   +-+ O_Active       |
      |Terminated|<---------------+   | +-------------+--+
      +----------+                    |               |
                                +-----+            +--V-+
                                |                  |DP19|
                             +--V-+       +--------+----+
                             |DP17|       | O_Disconnect|
                             +--+-+       +-------------+
                                |
                                V
                           To O_EXCEPTION
      Legend:

      | Communication between
      | states in the same
      V protocol

      ======> Communication between IN Layer and SIP Protocol
              State machine to transfer call state

         Figure 5.  Mapping from SIP to O_BCSM

   The SIP "Calling" protocol state has enough functionality to absorb
   the seven PICs as described below:

      O_NULL: This PIC is basically a fall through state to the next
      PIC, AUTHORIZE_ORIGINATION_ATTEMPT.

      AUTHORIZE_ORIGINATION_ATTEMPT: In this PIC, the IN layer has
      detected that someone wishes to make a call.  Under some
      circumstances (e.g., if the user is not allowed to make calls
      during certain hours), such a call cannot be placed.  SIP can
      authorize the calling party by using a set of policy directives

Gurbani, et al.              Informational                     [Page 13]
RFC 3976                 Interworking SIP & IN              January 2005

      configured by the SIP administrator.  If the called party is
      authorized to place the call, the IN layer is instructed to enter
      the next PIC, COLLECT_INFO through DP 3
      (Origination_Attempt_Authorized).  If for some reason the call
      cannot be authorized, DP 2 (Origination_Denied) is processed, and
      control transfers to the SIP state machine.  The SIP state machine
      must format and send a non-2xx final response (possibly 403) to
      the upstream entity.

      COLLECT_INFO: This PIC is responsible for collecting a dial string
      from the calling party and verifying the format of the string.  If
      overlap dialing is being used, this PIC can invoke DP 4
      (Collect_Timeout) and transfer control to the SIP state machine,
      which will format and send a non-2xx final response (possibly a
      484).  If the dial string is valid, DP 5 (Collected_Info) is
      processed, and the IN layer is instructed to enter the next PIC,
      ANALYZE_INFO.

      ANALYZE_INFO: This PIC is responsible for translating the dial
      string to a routing number.  Many IN services, such as freephone,
      LNP (Local Number Portability), and OCS (Originating Call
      Screening) occur during this PIC.  The IN layer can use the R-URI
      of the SIP INVITE request for analysis.  If the analysis succeeds,
      the IN layer is instructed to enter the next PIC, SELECT_ROUTE.
      If the analysis fails, DP 6 (Invalid_Info) is processed, and the
      control transfers to the SIP state machine, which will generate a
      non-2xx final response (possibly 400, 401, 403, 404, 405, 406,
      410, 414, 415, 416, 485, or 488) and send it to the upstream
      entity.

      SELECT_ROUTE: In the circuit-switched network, the actual physical
      route has to be selected at this point.  The SIP analogue would be
      to determine the next hop SIP server.  This could be chosen by a
      variety of means.  For instance, if the Request URI in the
      incoming INVITE request is an E.164 number, the SIP entity can use
      a protocol like TRIP [10] to find the best gateway to egress the
      request onto the PSTN.  If a successful route is selected, the IN
      call model moves to PIC AUTH_CALL_SETUP via DP 9 (Route_Selected).
      Otherwise, the control transfers to the SIP state machine via DP 8
      (Route_Select_Failure), which will generate a non-2xx final
      response (possibly 488) and send it to the upstream entity.

      AUTH_CALL_SETUP: Certain service features restrict the type of
      call that may originate on a given line or trunk.  This PIC is the
      point at which relevant restrictions are examined.  If no such
      restrictions are encountered, the IN call model moves to PIC
      CALL_SENT via DP 11 (Origination_Authorized).  If a restriction is
      encountered that prohibits further processing of the call, DP 10

Gurbani, et al.              Informational                     [Page 14]
RFC 3976                 Interworking SIP & IN              January 2005

      (Authorization_Failure) is processed, and control is transferred
      to the SIP state machine, which will generate a non-2xx final
      response (possibly 404, 488, or 502).  Otherwise, DP 11
      (Origination_Authorized) is processed, and the IN layer is
      instructed to enter the next PIC, CALL_SENT.

      CALL_SENT: At this point, the request needs to be sent to the
      downstream entity.  The IN layer waits for a signal confirming
      either that the call has been presented to the called party or
      that a called party cannot be reached for a particular reason.
      The control is transferred to the SIP state machine.  The SIP
      state machine should now send the call to the next downstream
      server determined in PIC SELECT_ROUTE.  The IN call model now
      blocks until unblocked by the SIP state machine.

      If the above seven PICs have been successfully negotiated, the
      SIN-enabled SIP entity now sends the SIP INVITE message to the
      next hop server.  Further processing now depends on the
      provisional responses (if any) and the final response received by
      the SIP protocol state machine.  The core SIP specification does
      not guarantee the delivery of 1xx responses; thus special
      processing is needed at the IN layer to transition to the next PIC
      (O_ALERTING) from the CALL_SENT PIC.  The special processing
      needed for responses while the SIP state machine is in the
      "Proceeding" state and the IN layer is in the "CALL_SENT" state is
      described next.

         A 100 response received at the SIP state machine elicits no
         special behavior in the IN layer.

         A 180 response received at the SIP entity enables the
         processing of DP 14 (O_Term_Seized), however, a state
         transition to O_ALERTING is not undertaken yet.  Instead, the
         IN layer is instructed to remain in the CALL_SENT PIC until a
         final response is received.

         A 2xx response received at the SIP entity enables the
         processing of DP 14 (O_Term_Seized), and the immediate
         transition to the next state, O_ALERTING (processing in
         O_ALERTING is described later).

         A 3xx response received at the SIP entity enables the
         processing of DP 12 (Route_Failure).  The IN call model from
         this point goes back to the SELECT_ROUTE PIC to select a new
         route for the contacts in the 3xx final response (not shown in
         Figure 5 for brevity).

Gurbani, et al.              Informational                     [Page 15]
RFC 3976                 Interworking SIP & IN              January 2005

         A 486 (Busy Here) response received at the SIP entity enables
         the processing of DP 13 (O_Called_Party_Busy) and resources for
         the call are released at the IN call model.

         If the SIN-enabled SIP entity gets a 4xx (except 486), 5xx, or
         6xx final response, DP 21 (O_Calling_Party_Disconnect &
         O_Abandon) is processed and control passes to the SIP state
         machine.  Since a call was not successfully established, both
         the IN layer and the SIP state machine can release resources
         for the call.

      O_ALERTING - This PIC will be entered as a result of receiving a
      200-class response.  Since a 200-class response to an INVITE
      indicates acceptance, this PIC is mostly a fall through to the
      next PIC, O_ACTIVE via DP 16 (O_Answer).

      O_ACTIVE - At this point, the call is active.  Once in this state,
      the call may get disconnected only when one of the following three
      events occur: (1) the network connection fails, (2) the called
      party disconnects the call, or (3) the calling party disconnects
      the call.  If event (1) occurs, DP 17 (O_Connection_Failure) is
      processed and call control is transferred to the SIP protocol
      state machine.  Since the network failed, there is not much sense
      in attempting to send a BYE request; thus, both the SIP protocol
      state machine and the IN call layer should release all resources
      associated with the call and initialize themselves to the null
      state.  Event (2) results in the processing of DP 19
      (O_DISCONNECT) and a move to the last PIC, O_DISCONNECT.  Event
      (3) occurs if the calling party deliberately terminated the call.
      In this case, DP 21 (O_Abandon & O_Calling_Party_Disconnect) will
      be processed, and control will be passed to the SIP protocol state
      machine.  The SIP protocol state machine must send a BYE request
      and wait for a final response.  The IN layer releases all of its
      resources and initializes itself to the null state.

      O_DISCONNECT: When the SIP entity receives a BYE request, the IN
      layer is instructed to move to the last PIC, O_DISCONNECT via DP
      19.  A final response for the BYE is generated and transmitted by
      the SIP entity, and the call resources are freed by both the SIP
      protocol state machine and the IN layer.

5.2.  Mapping SIP Protocol State Machine to T_BCSM

   The T_BCSM object is created when a SIP INVITE message makes its way
   to the terminating SIN-enabled SIP entity.  This entity creates the
   T_BCSM object and initializes it to the T_NULL PIC.

Gurbani, et al.              Informational                     [Page 16]
RFC 3976                 Interworking SIP & IN              January 2005

   Figure 6 provides a visual map from the SIP protocol state machine to
   the terminating half of the IN call model:

           SIP                                      T_BCSM

        | INVITE
        V
   +----------+                          +------------+
   |Proceeding+=========================>+ T_Null     +<-------+
   +-+--+--/\-+                          +/\----+-----+        |
     |  |  ||        +-----------+        |     |              |
     |  |  ||<=======+T_Exception+--------+  +--V-+         +--+-+
     |  |  ||        +-/\--------+           |DP22|         |DP35|
     |  |  ||          |    +----+       +---+----+------+  +--+-+
     |  |  ||          +<---+DP23|<------+Auth._Term._Att+---->+
     |  |  ||          |    +----+       +------+--------+     |
     |  |  ||          |                        |              |
     |  |  ||          |                     +--V-+            |
     |  |  ||          |                     |DP24|            |
     |  |  ||          |    +----+       +---+----+------+     |
     |  |  ||          +<---+DP25|<------+Select_Facility+---->+
     |  |  ||          |    +----+       +------+--------+     |
     |  |  ||          |                        |              |
     |  |  ||          |                     +--V-+            |
     |  |  ||          |                     |DP26|            |
     |  |  ||          |    +----+       +---+----+------+     |
     |  |  ||          +<---+DP27|<------+ Present_Call  +---->+
     |  |  ||          |    +----+       +------+--------+     |
     |  |  ||          |                        |              |
     |  |  ||          |                     +--V-+            |
     |  |  ||          |                     |DP28|            |
     |  |  ||          |    +----+       +---+----+------+     |
     |  |  ||          +<---+DP29|<------+ T_Alerting    +---->+
     |  |  ||          |    +----+       +-/\--+---------+     |
     |  |  ||          +<--------------+   ||   |              |
     |  |  ||                          |   ||   |              |
     |  |  ++==========================|===++   |              |
     |  |  /\                  +-------+     +--V-+            |
     |  |  ||                  |             +DP30|            |
     |  |  ||                +-+--+      +---+----+------+     |
     |  |  ||                |DP31+<-----| T_Active      +---->+
     |  |  ||                +----+      +-/\-----+------+
     |  |  ||                              ||      |
     |  |  ||                              ||      |
2xx  |  |  ++==============================++      |
sent |  |                                          |
+----+  | 3xx - 6xx response                    +--V-+
|       | sent                                  |DP33|

Gurbani, et al.              Informational                     [Page 17]
RFC 3976                 Interworking SIP & IN              January 2005

|  +----V-----+                          +------+----+----+
|  |Completed |                          | T_Disconnect   |
|  +----+-----+                          +----------------+
|       |
|       | ACK received
|       |
|  +----V-----+
|  |Confirmed |
|  +----+-----+
|       |
+------>|
        |
   +----V-----+
   |Terminated|
   +----------+

     Legend:

     | Communication between
     | states in the same
     V protocol
     ======> Communication between IN call model and SIP
             protocol state machine to transfer call state

        Figure 6.  Mapping from SIP to T_BCSM

   The SIP "Proceeding" state has enough functionality to absorb the
   first five PICS -- T_Null, Authorize_Termination_Attempt,
   Select_Facility, Present_Call, T_Alerting -- as described below:

      T_NULL:  At this PIC, the terminating end creates the call at the
      IN layer.  The incoming call results in the processing of DP 22,
      Termination_Attempt, and a transition to the next PIC,
      AUTHORIZE_TERMINATION_ATTEMPT, takes place.

      AUTHORIZE_TERMINATION_ATTEMPT: At this PIC, it is ascertained that
      the called party wishes to receive the call and that the
      facilities of the called party are compatible with those of the
      calling party.  If any of these conditions is not met, DP 23
      (Termination_Denied) is invoked, and the call control is
      transferred to the SIP protocol state machine.  The SIP protocol
      state machine can format and send a non-2xx final response
      (possibly 403, 405, 415, or 480).  If the conditions of the PIC
      are met, processing of DP 24 (Termination_Authorized) is invoked,
      and a transition to the next PIC, SELECT_FACILITY, takes place.

Gurbani, et al.              Informational                     [Page 18]
RFC 3976                 Interworking SIP & IN              January 2005

      SELECT_FACILITY: In circuit switched networks, this PIC is
      intended to select a line or trunk to reach the called party.  As
      lines or trunks are not applicable in an IP network, a SIN-enabled
      SIP entity can use this PIC to interface with a PSTN gateway and
      select a line/trunk to route the call.  If the called party is
      busy, or if a line/trunk cannot be seized, the processing of DP 25
      (T_Called_Party_Busy) is invoked, and the call goes to the SIP
      protocol state machine.  The SIP protocol state machine must
      format and send a non-2xx final response (possibly 486 or 600).
      If a line/trunk was successfully seized, the processing of DP 26
      (Terminating_Resource_Available) is invoked, and a transition to
      the next PIC, PRESENT_CALL, takes place.

      PRESENT_CALL: At this point, the call is being presented (via the
      ISUP ACM message, or Q.931 Alerting message, or simply by ringing
      a POTS phone).  If there was an error presenting the call, the
      processing of DP 27 (Presentation_Failure) is invoked, and the
      call control is transferred to the SIP protocol state machine,
      which must format and send a non-2xx final response (possibly
      480).  If the call was successfully presented, the processing of
      DP 28 (T_Term_Seized) is invoked, and a transition to the next
      PIC, T_ALERTING, takes place.

      T_ALERTING: At this point, the called party is being "alerted".
      Control now passes momentarily to the SIP protocol state machine
      so that it can generate and send a "180 Ringing" response to its
      peer.  Furthermore, since network resources have been allocated
      for the call, timers are set to prevent indefinite holding of such
      resources.  The expiration of the relevant timers results in the
      processing of DP 29 (T_No_Answer), and the call control is
      transferred to the SIP protocol state machine, which must format
      and send a non-2xx final response (possibly 408).  If the called
      party answers, then DP 30 (T_Answer) is processed, followed by a
      transition to the next PIC, T_ACTIVE.

   After the above five PICs have been negotiated, the rest are mapped
   as follows:

      T_ACTIVE: The call is now active.  Once this state is reached, the
      call may become inactive under one of the following three
      conditions: (1) The network fails the connection, (2) the called
      party disconnects the call, or (3) the calling party disconnects
      the call.  Event (1) results in the processing of DP 31
      (T_Connection_Failure), and call control is transferred to the SIP
      protocol state machine.  Since the network failed, there is little
      sense in attempting to send a BYE request; thus, both the SIP
      protocol state machine and the IN call layer should release all
      resources associated with the call and initialize themselves to

Gurbani, et al.              Informational                     [Page 19]
RFC 3976                 Interworking SIP & IN              January 2005

      the null state.  Event (2) results in the processing of DP 33
      (T_Disconnect) and a transition to the next PIC, T_DISCONNECT.
      Event (3) occurs at the receipt of a BYE request at the SIP
      protocol state machine (not shown in Figure 6).  Resources for the
      call should be deallocated, and the SIP protocol state machine
      must send a 200 OK for the BYE request (not shown in Figure 6).

      T_DISCONNECT: In this PIC, the disconnect treatment associated
      with the called party's having disconnected the call is performed
      at the IN layer.  The SIP protocol state machine sends out a BYE
      and awaits a final response for the BYE (not shown in Figure 6).

6.  Examples of Call Flows

   Two examples are provided here to show how SIP protocol state machine
   and the IN call model work synchronously with each other.

   In the first example, a SIP UAC originates a call request destined to
   an 800 freephone number:

      INVITE sip:18005551212@example.com SIP/2.0
      From: sip:16305551212@example.net;tag=991-7as-66ff
      To: sip:18005551212@example.com
      Via: SIP/2.0/UDP stn1.example.net
      Call-ID: 67188121@example.net
      CSeq: 1 INVITE

   The request makes its way to the originating SIP network server
   running an IN call model.  The SIP network server hands, at the very
   least, the To: field and the From: field to the IN layer for
   freephone number translation.  The IN layer proceeds through its PICs
   and at the ANALYSE_INFO PIC consults the SCP for freephone
   translation.  The translated number is returned to the SIP network
   server, which forwards the message to the next hop SIP proxy, with
   the freephone number replaced by the translated number:

      INVITE sip:18475551212@example.com SIP/2.0
      From: sip:16305551212@example.net;tag=991-7as-66ff
      To: sip:18005551212@example.com
      Via: SIP/2.0/UDP ext-stn2.example.net
      Via: SIP/2.0/UDP stn1.example.net
      Call-ID: 67188121@example.net
      CSeq: 1 INVITE

Gurbani, et al.              Informational                     [Page 20]
RFC 3976                 Interworking SIP & IN              January 2005

   In the next example, a SIP UAC originates a call request destined to
   a 900 number:

      INVITE sip:19005551212@example.com SIP/2.0
      From: sip:16305551212@example.net;tag=991-7as-66dd
      To: sip:19005551212@example.com
      Via: SIP/2.0/UDP stn1.example.net
      Call-ID: 88112@example.net
      CSeq: 1 INVITE

   The request makes its way to the originating SIP network server
   running an IN call model.  The SIP network server hands, at the very
   least, the To: field and the From: field to the IN layer for 900
   number translation.  The IN layer proceeds through its PICs and at
   the ANALYSE_INFO PIC consults the SCP for the translation.  During
   the translation, the SCP detects that the originating party is not
   allowed to make 900 calls.  It passes this information to the
   originating SIP network server, which informs the SIP UAC by using a
   SIP "403 Forbidden" response status code:

      SIP/2.0 403 Forbidden
      From: sip:16305551212@example.net;tag=991-7as-66dd
      To: sip:19005551212@example.com;tag=78K-909II
      Via: SIP/2.0/UDP stn1.example.net
      Call-ID: 88112@example.net
      CSeq: 1 INVITE

7.  Security Considerations

   Security considerations for SIN services cover both networks being
   used, namely, the PSTN and the Internet.  SIN uses the security
   measures in place for both the networks.  With reference to Figure 2,
   the INAP messages between the SCP and the SIN-enabled SIP entity must
   be secured by the signaling transport used between the SCP and the
   SIN-enabled entity.  Likewise, the requests coming into the SIN-
   enabled SIP entity must first be authenticated and, if need be,
   encrypted as well, using the means and procedures defined in [3] for
   SIP requests.

8.  References

8.1.  Normative References

   [1]   I. Faynberg, L. Gabuzda, M. Kaplan, and N.Shah, "The
         Intelligent Network Standards: Their Application to Services,"
         McGraw-Hill, 1997.

Gurbani, et al.              Informational                     [Page 21]
RFC 3976                 Interworking SIP & IN              January 2005

   [2]   ITU-T Q.1204 1993: Recommendation Q.1204, "Intelligent Network
         Distributed Functional Plane Architecture," International
         Telecommunications Union Standardization Section, Geneva.

   [3]   Rosenberg, J., Schulzrinne, H., Camarillo, G., Johnston, A.,
         Peterson, J., Sparks, R., Handley, M., and E. Schooler, "SIP:
         Session Initiation Protocol", RFC 3261, June 2002.

8.2.  Informative References

   [4]   ITU-T Q.1208: "General aspects of the Intelligent Network
         Application protocol"

   [5]   Donovan, S., "The SIP INFO Method", RFC 2976, October 2000.

   [6]   Roach, A.B., "Session Initiation Protocol (SIP)-Specific Event
         Notification", RFC 3265, June 2002.

   [7]   Schulzrinne, H. and S. Petrack, "RTP Payload for DTMF Digits,
         Telephony Tones and Telephony Signals", RFC 2833, May 2000.

   [8]   ITU-T Q.1218: "Interface Recommendation for Intelligent Network
         Capability Set 1".

   [9]   ITU-T Q.1228: "Interface Recommendation for Intelligent Network
         Capability Set 2".

   [10]  Rosenberg, J., Salama, H., and M. Squire, "Telephony Routing
         over IP (TRIP)", RFC 3219, January 2002.

Gurbani, et al.              Informational                     [Page 22]
RFC 3976                 Interworking SIP & IN              January 2005

Appendix A: Mapping of 4xx-6xx Responses in SIP to IN Detections Points

   The mapping of error codes 4xx-6xx responses in SIP to the possible
   Detection Points in PIC Originating and Terminating Call Handling is
   indicated in the table below.  The reason phrase in the 4xx-6xx
   response is reproduced from [3].

        SIP response code             DP mapping to IN
        -----------------             ----------------------
        200 OK                        DP 14
        3xx                           DP 12
        403 Forbidden                 DP 2,  DP 21
        484 Address Incomplete        DP 4,  DP 21
        400 Bad Request               DP 6,  DP 21
        401 Unauthorized              DP 6,  DP 21
        403 Forbidden                 DP 6,  DP 21, DP 23
        404 Not Found                 DP 6,  DP 21
        405 Method Not Allowed        DP 6,  DP 21, DP 23
        406 Not Acceptable            DP 6,  DP 21
        408 Request Timeout           DP 29
        410 Gone                      DP 6,  DP 21
        414 Request-URI Too Long      DP 6,  DP 21
        415 Unsupported Media Type    DP 6,  DP 21, DP 23
        416 Unsupported URI Scheme    DP 6,  DP 21
        480 Temporarily Unavailable   DP 23, DP 27
        485 Ambiguous                 DP 6,  DP 21
        486 Busy Here                 DP 13, DP 21, DP 25
        488 Not Acceptable Here       DP 6,  DP 21

Gurbani, et al.              Informational                     [Page 23]
RFC 3976                 Interworking SIP & IN              January 2005

Acknowledgments

   Special acknowledgment is due to Hui-Lan Lu for acting as the chair
   of the SIN DT and ensuring that the focus of the DT did not veer too
   far.  The authors would also like to give special thanks to Mr. Ray
   C. Forbes from Marconi Communications Limited for his valuable
   contribution on the system and network architectural aspects as co-
   chair in the ETSI SPAN.   Thanks also to Doris Lebovits, Kamlesh
   Tewani, Janusz Dobrowloski, Jack Kozik, Warren Montgomery, Lev
   Slutsman, Henning Schulzrinne, and Jonathan Rosenberg, who all
   contributed to the discussions on the relationship of IN and SIP call
   models.

Author's Addresses

   Vijay K. Gurbani
   Lucent Technologies, Inc.
   2000 Lucent Lane, Rm 6G-440
   Naperville, Illinois 60566
   USA
   Phone: +1 630 224 0216
   EMail: vkg@lucent.com

   Frans Haerens
   Alcatel Bell
   Francis Welles Plein,1
   Belgium
   Phone: +32 3 240 9034
   EMail: frans.haerens@alcatel.be

   Vidhi Rastogi
   Wipro Technologies
   Plot No.72, Keonics Electronics City,
   Hosur Main Road,
   Bangalore 226 560 100
   Phone: +91 80 51381869
   EMail: vidhi.rastogi@wipro.com

Gurbani, et al.              Informational                     [Page 24]
RFC 3976                 Interworking SIP & IN              January 2005

Full Copyright Statement

   Copyright (C) The Internet Society (2005).

   This document is subject to the rights, licenses and restrictions
   contained in BCP 78 and at www.rfc-editor.org, and except as set
   forth therein, the authors retain all their rights.

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
   ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
   INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
   INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Intellectual Property

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the ISOC's procedures with respect to rights in ISOC Documents can
   be found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at ietf-
   ipr@ietf.org.

Acknowledgement

   Funding for the RFC Editor function is currently provided by the
   Internet Society.

Gurbani, et al.              Informational                     [Page 25]