Skip to main content

Sieve Email Filtering: MIME Part Tests, Iteration, Extraction, Replacement, and Enclosure
RFC 5703

Document Type RFC - Proposed Standard (October 2009) Errata
Authors Tony Hansen , Cyrus Daboo
Last updated 2020-04-21
RFC stream Internet Engineering Task Force (IETF)
Formats
Additional resources Mailing list discussion
IESG Responsible AD Lisa M. Dusseault
Send notices to (None)
RFC 5703
Network Working Group                                          T. Hansen
Request for Comments: 5703                             AT&T Laboratories
Category: Standards Track                                       C. Daboo
                                                              Apple Inc.
                                                            October 2009

     Sieve Email Filtering: MIME Part Tests, Iteration, Extraction,
                       Replacement, and Enclosure

Abstract

   This document defines extensions to the Sieve email filtering
   language to permit analysis and manipulation of the MIME body parts
   of an email message.

Status of This Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

Copyright Notice

   Copyright (c) 2009 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the BSD License.

   This document may contain material from IETF Documents or IETF
   Contributions published or made publicly available before November
   10, 2008.  The person(s) controlling the copyright in some of this
   material may not have granted the IETF Trust the right to allow
   modifications of such material outside the IETF Standards Process.
   Without obtaining an adequate license from the person(s) controlling
   the copyright in such materials, this document may not be modified

Hansen & Daboo              Standards Track                     [Page 1]
RFC 5703                 Sieve MIME Operations              October 2009

   outside the IETF Standards Process, and derivative works of it may
   not be created outside the IETF Standards Process, except to format
   it for publication as an RFC or to translate it into languages other
   than English.

Table of Contents

   1. Introduction ....................................................2
   2. Conventions Used in This Document ...............................3
   3. Sieve Loops: Actions "foreverypart" and "break" .................3
   4. Changes to Sieve Tests ..........................................4
      4.1. Test "header" ..............................................4
      4.2. Test "address" .............................................7
      4.3. Test "exists" ..............................................8
   5. Action "replace" ................................................8
   6. Action "enclose" ...............................................10
   7. Action "extracttext" ...........................................11
   8. Sieve Capability Strings .......................................11
   9. Examples .......................................................12
      9.1. Example 1 .................................................12
      9.2. Example 2 .................................................12
      9.3. Example 3 .................................................13
   10. Acknowledgements ..............................................13
   11. Security Considerations .......................................14
   12. IANA Considerations ...........................................14
      12.1. foreverypart capability ..................................15
      12.2. mime capability ..........................................15
      12.3. replace capability .......................................15
      12.4. enclose capability .......................................16
      12.5. extracttext capability ...................................16
   13. References ....................................................16
      13.1. Normative References .....................................16
      13.2. Informative References ...................................17

1.  Introduction

   MIME messages ([RFC2045]) are often complex objects, consisting of
   many parts and sub-parts.  This Sieve ([RFC5228]) extension defines
   mechanisms for performing tests on MIME body parts, looping through
   the MIME body parts, extracting information from a MIME body part,
   changing the contents of a MIME body part, and enclosing the entire
   message within a wrapper.

Hansen & Daboo              Standards Track                     [Page 2]
RFC 5703                 Sieve MIME Operations              October 2009

2.  Conventions Used in This Document

   Conventions for notations are as in [RFC5228], Section 1.1.

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

3.  Sieve Loops: Actions "foreverypart" and "break"

   The base Sieve language has no looping mechanism.  Given that
   messages may contain multiple parts, in order to support filters that
   apply to any and all parts, we introduce a new control command:
   "foreverypart", which is an iterator that walks though every MIME
   part of a message, including nested parts, depth first, and applies
   the commands in the specified block to each of them.  The iterator
   will start with the first MIME part (as its current context) and will
   execute a command block (Sieve commands enclosed by {...}).  Upon
   completion of this command block, the iterator advances to the next
   MIME part (as its current context) and executes the same command
   block again.

   The iterator can be terminated prematurely by a new Sieve control
   command, "break".

   Usage:  foreverypart [":name" string] block

   Usage:  break [":name" string];

   "foreverypart" commands can be nested inside other "foreverypart"
   commands.  When this occurs, the nested "foreverypart" iterates over
   the MIME parts contained within the MIME part currently being
   targeted by the nearest enclosing "foreverypart" command.  (That is,
   the inner loop only operates on children of the bodypart currently
   accessed by the outer loop.)  If that MIME part is a terminal MIME
   part (i.e., does not contain other MIME parts), then the nested
   "foreverypart" loop is simply ignored.

   Sieve implementations MAY limit the number of nested loops that occur
   within one another; however, they MUST support at least one nested
   loop inside another loop.

   If a name is given to a "break" command, it terminates the closest
   enclosing loop with the identical matching name.  (If a nested
   "foreverypart" name is the same as a "foreverypart" name in an outer
   level, the outer level name is hidden.)  It is an error if there is
   no enclosing loop with that name.

Hansen & Daboo              Standards Track                     [Page 3]
RFC 5703                 Sieve MIME Operations              October 2009

   If no name is given in a "break" command (i.e., the ":name" parameter
   is omitted), the break command terminates the closest enclosing loop.

4.  Changes to Sieve Tests

   This specification extends the base Sieve "header", "address", and
   "exists" tests to support targeting those tests at a specific MIME
   part or at all MIME parts in the enclosing scope.

4.1.  Test "header"

   The "header" test is extended with the addition of new ":mime" and
   ":anychild" tagged arguments and their associated options.

   Usage:  header [":mime"] [":anychild"] [MIMEOPTS]
      [COMPARATOR] [MATCH-TYPE]
      <header-names: string-list> <key-list: string-list>

      The definition of [MIMEOPTS] is:

   Syntax:  ":type" / ":subtype" / ":contenttype" /
      ":param" <param-list: string-list>

   When the ":mime" tagged argument is present in the "header" test, it
   will parse the MIME header lines in the message so that tests can be
   performed on specific elements.  The ":anychild" tagged argument may
   only appear when the ":mime" tagged argument is present, and only
   modifies the semantics of the ":mime" tagged argument.  That is,
   presence of the ":anychild" in absence of ":mime" is an error.

   When used outside the context of a "foreverypart" iterator, and
   without an ":anychild" tagged argument, the "header" test will
   examine only the outer top-level [RFC5322] headers of the message.

   When used inside the context of a "foreverypart" iterator, and
   without an ":anychild" tagged argument, the "header" test will
   examine the headers associated with the current MIME part context
   from the loop.

   When used outside the context of a "foreverypart" iterator, and with
   an ":anychild" tagged argument, the "header" test will examine all
   MIME body parts and return true if any of them satisfies the test.

   When used inside the context of a "foreverypart" iterator, and with
   an ":anychild" tagged argument, the "header" test will examine the
   current MIME part context and all its nested MIME body parts,
   returning true if any of them satisfies the test.

Hansen & Daboo              Standards Track                     [Page 4]
RFC 5703                 Sieve MIME Operations              October 2009

   The "header" test with the ":mime" tagged argument can test various
   aspects of certain structured MIME headers.  Implementations SHOULD
   support desegmentation, decoding, and charset translation of
   parameter values encoded according to [RFC2231] as part of this test.
   Additionally, [RFC2047] describes a process whereby [RFC5322] headers
   can be encoded in various ways.  That encoding is not strictly
   allowed in MIME parameters; however, in practice, it has been used in
   many email implementations.  So, Sieve implementations MAY decode
   [RFC2047]-encoded words in parameter values as part of this test.

   These options are available:

   :type          for a "Content-Type" MIME header field, parses and
                  tests the value of the MIME type specified in the
                  header; for a "Content-Disposition" MIME header field,
                  parses and tests the value of the disposition
                  specified in the header; for other MIME headers, uses
                  a blank string for the test.

   :subtype       for a "Content-Type" MIME header field, parses and
                  tests the value of the MIME subtype specified in the
                  header; for a "Content-Disposition" MIME header field,
                  uses a blank string for the test; for other MIME
                  headers, uses a blank string for the test.

   :contenttype   for a "Content-Type" MIME header field, parses and
                  tests the combined value of the MIME type and subtype
                  specified in the header; for a "Content-Disposition"
                  MIME header field, behaves the same as the ":type"
                  option; for other MIME headers, uses a blank string
                  for the test.

   :param         parses the header looking for MIME parameters in the
                  header.  The supplied string-list lists the names of
                  any parameters to be tested.  If any one named
                  parameter value matches any of the test string values,
                  the test will return true.

   When the ":count" option from [RFC5231] is used, the following
   applies:

   a.  for ":type", ":subtype", or ":contenttype", return a count of the
       number of headers that parsed successfully

   b.  for ":param", return a count of the number of parameters with the
       given name that were found

Hansen & Daboo              Standards Track                     [Page 5]
RFC 5703                 Sieve MIME Operations              October 2009

   Example:

   require ["mime", "fileinto"];

   if header :mime :type "Content-Type" "image"
   {
       fileinto "INBOX.images";
   }

   In this example, any message that contains a MIME image type part at
   the top-level is saved to the mailbox "INBOX.images".

   Example:

   require ["mime", "fileinto"];

   if header :mime :anychild :contenttype
             "Content-Type" "text/html"
   {
       fileinto "INBOX.html";
   }

   In this example, any message that contains any MIME part with a
   content-type of "text/html" is saved to the mailbox "INBOX.html".

   Example:

   require ["mime", "foreverypart", "fileinto"];

   foreverypart
   {
       if allof (
         header :mime :param "filename" :contains
            "Content-Disposition" "important",
         header :mime :subtype "Content-Type" "pdf",
         size :over "100K")
       {
           fileinto "INBOX.important";
           break;
       }
   }

   In this example, any message that contains a MIME part that has a
   content-disposition with a filename parameter containing the text
   "important", has a content-subtype of "pdf" and is bigger than 100 Kb
   is saved to the mailbox "INBOX.important".

Hansen & Daboo              Standards Track                     [Page 6]
RFC 5703                 Sieve MIME Operations              October 2009

4.2.  Test "address"

   The "address" test is extended with the addition of new ":mime" and
   ":anychild" tagged arguments and their associated options.

   Usage:  address [":mime"] [":anychild"] [COMPARATOR]
      [ADDRESS-PART] [MATCH-TYPE]
      <header-list: string-list> <key-list: string-list>

   When the ":mime" tagged argument is present in the "address" test, it
   will parse the MIME header lines as if they were standard address
   header lines in a message so that tests can be performed on specific
   elements.

   The behavior of the ":anychild" tagged argument and the interaction
   with the "foreverypart" iterator is the same as for the extended
   "header" test in Section 4.1.

   That is,

      the use of "address" when both the ":mime" and ":anychild" tagged
      arguments are omitted is the test defined in [RFC5228], i.e., it
      will *only* operate on top-level header fields, whether or not it
      is inside "foreverypart".

      the use of "address" with ":mime" and no ":anychild" operates on
      the current MIME part only (or on the top-level header fields, if
      outside "foreverypart").

      the use of "address" with ":mime" and ":anychild" operates on the
      current MIME part and all of its descendants.

   Example:

   require ["mime", "fileinto"];

   if address :mime :is :all "content-from" "tim@example.com"
   {
       fileinto "INBOX.part-from-tim";
   }

   In this example, any message that contains a MIME Content-From header
   at the top-level matching the text "tim@example.com" is saved to the
   mailbox "INBOX.part-from-tim".

Hansen & Daboo              Standards Track                     [Page 7]
RFC 5703                 Sieve MIME Operations              October 2009

4.3.  Test "exists"

   The "exists" test is extended with the addition of the new ":mime"
   and ":anychild" tagged arguments and their associated options.

   Usage:  exists [":mime"] [":anychild"] <header-names: string-list>

   When the ":mime" tagged argument is present in the "exists" test, the
   test is extended to check for the existence of MIME headers in MIME
   parts.

   The behavior of the ":anychild" tagged argument and the interaction
   with the "foreverypart" iterator is the same as for the extended
   "header" test Section 4.1.

   That is,

      the use of "exists" when both the ":mime" and ":anychild" tagged
      arguments are omitted is the test defined in [RFC5228], i.e., it
      will *only* operate on top-level header fields, whether or not it
      is inside "foreverypart".

      the use of "exists" with ":mime" and no ":anychild" operates on
      the current MIME part only (or on the top-level header fields, if
      outside "foreverypart").

      the use of "exists" with ":mime" and ":anychild" operates on the
      current MIME part and all of its descendants.

   Example:

   require ["mime", "fileinto"];

   if exists :mime :anychild "content-md5"
   {
       fileinto "INBOX.md5";
   }

   In this example, any message that contains a MIME Content-MD5 header
   in any MIME part is saved to the mailbox "INBOX.md5".

5.  Action "replace"

   Usage:  replace [":mime"] [":subject" string] [":from" string]
      <replacement: string>

   The "replace" command is defined to allow a MIME part to be replaced
   with the text supplied in the command.

Hansen & Daboo              Standards Track                     [Page 8]
RFC 5703                 Sieve MIME Operations              October 2009

   When used in the context of a "foreverypart" iterator, the MIME part
   to be replaced is the "current" MIME part.  If the current MIME
   context is a multipart MIME part, the entire multipart MIME part is
   replaced, which would alter the MIME structure of the message by
   eliminating all of the children of the multipart part.  (Replacing a
   non-multipart MIME part within a "foreverypart" loop context does not
   alter the overall message structure.)  If the MIME structure is
   altered, the change takes effect immediately: the "foreverypart"
   iterator that is executing does not go into the no-longer existing
   body parts, and subsequent "foreverypart" iterators would use the new
   message structure.

   When used outside the context of a "foreverypart" loop, the MIME part
   to be replaced is the entire message.

   If the ":mime" parameter is not specified, the replacement string is
   a text/plain part in UTF-8 [RFC3629].

   If the ":mime" parameter is specified, then the replacement string
   is, in fact, a MIME entity as defined in [RFC2045], Section 2.4,
   including both MIME headers and content.

   If the entire message is being replaced, the optional ":subject"
   parameter specifies a subject line to attach to the message that is
   generated.  UTF-8 characters can be used in the string argument;
   implementations MUST convert the string to [RFC2047]-encoded words if
   and only if non-ASCII characters are present.  If the ":subject"
   parameter is used, implementations MUST preserve any previous Subject
   header as an Original-Subject header.  Implementations MUST preserve
   all other header fields from the original message with the exception
   of those relating to the MIME structure that is being replaced.

   If the entire message is being replaced, as an indication that the
   message is no longer as created by the original author of the
   message, the optional ":from" parameter may be used to specify an
   alternate address to use in the From field of the message that is
   generated.  The string must specify a valid [RFC5322] mailbox-list.
   Implementations SHOULD check the syntax and generate an error when a
   syntactically invalid ":from" parameter is specified.
   Implementations MAY also impose restrictions on what addresses can be
   specified in a ":from" parameter; it is suggested that values that
   fail such a validity check simply be ignored rather than causing the
   "replace" action to fail.  If the From header is changed,
   implementations MUST preserve the previous From header as an
   Original-From header.

Hansen & Daboo              Standards Track                     [Page 9]
RFC 5703                 Sieve MIME Operations              October 2009

   Implementations that support the "editheader" extension [RFC5293]
   MUST ensure that any Original-Subject or Original-From headers added
   by the system cannot be modified or removed.  Implementations MAY
   prevent the addition of Original-Subject and Orignal-From headers via
   the "editheader" extension.

   If ":mime" is specified and either ":subject" or ":from" is
   specified, the ":subject:" or ":from" parameter MUST be ignored.
   This SHOULD be flagged as a compilation error.

6.  Action "enclose"

   Usage:  enclose <:subject string> <:headers string-list> string

   A new Sieve action command is defined to allow an entire message to
   be enclosed as an attachment to a new message.  After enclosure,
   subsequent actions affecting the message header or content, as well
   as tests operating on the MIME structure or accessing MIME header
   fields, use the newly created message instead of the original
   message; this means that any use of a "replace" action or other
   similar actions should be executed before the "enclose" action.

   If multiple "enclose" actions are executed by a script, the message
   is enclosed multiple times.  (If a Sieve script desires to choose
   between different enclosures, or wants to delay the enclosure to the
   end of the script, it can use variables with appropriate tests
   [RFC5229].)

   This action does not affect messages that are forwarded via a
   "redirect" action.

   Specifically, the original message becomes a multipart/mixed message
   with two parts: a text/plain portion with the string argument as its
   body, and a message/rfc822 portion with the original message
   enclosed.  The Content-Type: header field becomes multipart/mixed.
   The optional Subject: header is specified by the ":subject" argument;
   if not present, the subject will be taken from the enclosed message.
   Any headers specified by ":headers" are copied from the old message
   into the new message.  If not specified by ":headers", Date: and
   From: headers should be synthesized to reflect the current date and
   the user running the Sieve action.

Hansen & Daboo              Standards Track                    [Page 10]
RFC 5703                 Sieve MIME Operations              October 2009

7.  Action "extracttext"

   Usage:  extracttext [MODIFIER] [":first" number] <varname: string>

   The "extracttext" action may be used within the context of a
   "foreverypart" loop and is used to store text into a variable as
   defined by [RFC5229].  Servers MUST support transcoding of any
   textual body part into UTF-8 for use with this action.  This requires
   decoding any transfer encoding as well as transcoding from the
   indicated character set into UTF-8.  It stores at most ":first"
   characters of the transcoded content of the current MIME body part in
   the variable identified by varname.  If the ":first" parameter is not
   present, the whole content of the current MIME body part is stored.
   In either case, the actually stored data MAY be truncated to conform
   to implementation specific limit on variable length and/or on MIME
   body part length.  If the transfer encoding or character set is
   unrecognized by the implementation or recognized but invalid, an
   empty string will result.

   If "extracttext" is used outside the context of a "foreverypart"
   loop, the action will set the variable identified by varname to the
   empty string.  This SHOULD be flagged as a compilation error.

   Modifiers are applied on the extracted text before it is stored in
   the variable.

8.  Sieve Capability Strings

   A Sieve implementation that defines the "foreverypart" and "break"
   actions will advertise the capability string "foreverypart".

   A Sieve implementation that defines the ":mime" and ":anychild"
   tagged arguments to the "header", "address", and "exists" commands
   will advertise the capability string "mime".

   A Sieve implementation that defines the "replace" action will
   advertise the capability string "replace".

   A Sieve implementation that defines the "enclose" action will
   advertise the capability string "enclose".

   A Sieve implementation that defines the "extracttext" action will
   advertise the capability string "extracttext".  Note that to be
   useful, the "extracttext" action also requires the "variables"
   [RFC5229] and "foreverypart" capabilities.

Hansen & Daboo              Standards Track                    [Page 11]
RFC 5703                 Sieve MIME Operations              October 2009

9.  Examples

9.1.  Example 1

   Consider a Sieve script to replace some of the Windows executable
   attachments in a message.  (The actual list of executable types and
   extensions is considerably longer and constantly changing.  The tests
   shown here are an example only.)  Such a script might look like this:

   require [ "foreverypart", "mime", "replace" ];
   foreverypart
   {
     if anyof (
            header :mime :contenttype :is
              "Content-Type" "application/exe",
            header :mime :param "filename"
              :matches ["Content-Type", "Content-Disposition"] "*.com" )
     {
       replace "Executable attachment removed by user filter";
     }
   }

9.2.  Example 2

   Consider a Sieve script to warn the user about some of the executable
   attachment types.  (The actual list of executable types and
   extensions is considerably longer and constantly changing.  The tests
   shown here are an example only.)  Such a script might look like this:

   require [ "foreverypart", "mime", "enclose" ];

   foreverypart
   {
     if header :mime :param "filename"
        :matches ["Content-Type", "Content-Disposition"]
          ["*.com", "*.exe", "*.vbs", "*.scr",
           "*.pif", "*.hta", "*.bat", "*.zip" ]
     {
       # these attachment types are executable
       enclose :subject "Warning" :text
   WARNING! The enclosed message contains executable attachments.
   These attachment types may contain a computer virus program
   that can infect your computer and potentially damage your data.

   Before clicking on these message attachments, you should verify
   with the sender that this message was sent by them and not a
   computer virus.

Hansen & Daboo              Standards Track                    [Page 12]
RFC 5703                 Sieve MIME Operations              October 2009

   .
   ;
       break;
     }
   }

9.3.  Example 3

   A Sieve script to extract subject and text out of messages from the
   boss might look like this:

   require ["mime", "variables", "extracttext"];

   if header :contains "from" "boss@example.org"
   {
     # :matches is used to get the value of the Subject header
     if header :matches "Subject" "*"
     {
       set "subject" "${1}";
     }

     # extract the first 100 characters of the first text/* part
     foreverypart
     {
       if header :mime :type :is "Content-Type" "text"
       {
         extracttext :first 100 "msgcontent";
         break;
       }
     }

     # if it's not a 'for your information' message
     if not header :contains "subject" "FYI:"
     {
       # do something using ${subject} and ${msgcontent}
       # such as sending a notification using a
       # notification extension
     }
   }

10.  Acknowledgements

   Comments from members of the MTA Filters Working Group, in particular
   Ned Freed, Kjetil Torgrim Homme, Mark Mallett, Alexey Melnikov, Aaron
   Stone, and Nigel Swinson are gratefully acknowledged.

Hansen & Daboo              Standards Track                    [Page 13]
RFC 5703                 Sieve MIME Operations              October 2009

11.  Security Considerations

   The "enclose" action creates an entirely new message, as compared to
   just redirecting or forwarding the existing message.  Therefore, any
   site policies applicable to message submission should be enforced.

   The looping specification specified here provides easier access to
   information about the message contents, which may also be achieved
   through other sieve tests.  This is not believed to raise any
   additional security issues beyond those for the Sieve "envelope" and
   "body" [RFC5173] tests.

   Any change in message content may interfere with digital signature
   mechanisms that include that content in the signed material.  In
   particular, using "replace" makes direct changes to the body content
   and will affect the body hash included in Domain Keys Identified Mail
   (DKIM) signatures [RFC4871], or the message signature used for Secure
   MIME (S/MIME) [RFC3851], Pretty Good Privacy (PGP) [RFC1991] or
   OpenPGP [RFC4880].

   It is not possible to examine the MIME structure of decrypted content
   in a multipart/encrypted MIME part.

   When "enclose" is used on a message containing a multipart/signed
   MIME part, the Sieve implementation MUST ensure that the original
   message is copied octet-for-octet to maintain the validity of the
   digital signature.

   The system MUST be sized and restricted in such a manner that even
   malicious use of MIME part matching does not deny service to other
   users of the host system.

   All of the security considerations given in the base Sieve
   specification also apply to these extensions.

12.  IANA Considerations

   The Original-Subject and Original-From headers have been registered
   in the Permanent Message Header Fields registry.

   The following templates specify the IANA registrations of the Sieve
   extensions specified in this document.  This information has been
   added to the IANA registry of Sieve Extensions (currently found at
   http://www.iana.org).

Hansen & Daboo              Standards Track                    [Page 14]
RFC 5703                 Sieve MIME Operations              October 2009

12.1.  foreverypart capability

   To: iana@iana.org
   Subject: Registration of new Sieve extension

   Capability name: foreverypart
   Description: adds the "foreverypart" and "break" actions for
   iterating through MIME parts of a message.

   RFC number: RFC 5703
   Contact address: The Sieve discussion list
   <ietf-mta-filters@imc.org>.

12.2.  mime capability

   To: iana@iana.org
   Subject: Registration of new Sieve extension

   Capability name: mime
   Description: adds the ":mime" and ":anychild" tagged arguments to the
   "header", "address", and "exists" tests.  Adds the ":type",
   ":subtype", ":contenttype", and ":param" options when ":mime" is used
   with the "header" test.

   RFC number: RFC 5703
   Contact address: The Sieve discussion list
   <ietf-mta-filters@imc.org>.

12.3.  replace capability

   To: iana@iana.org
   Subject: Registration of new Sieve extension

   Capability name: replace
   Description: adds the "replace" action for replacing a MIME body part
   of a message.

   RFC number: RFC 5703
   Contact address: The Sieve discussion list
   <ietf-mta-filters@imc.org>.

Hansen & Daboo              Standards Track                    [Page 15]
RFC 5703                 Sieve MIME Operations              October 2009

12.4.  enclose capability

   To: iana@iana.org
   Subject: Registration of new Sieve extension

   Capability name: enclose
   Description: adds the "enclose" action for enclosing a message with a
   wrapper.

   RFC number: RFC 5703
   Contact address: The Sieve discussion list
   <ietf-mta-filters@imc.org>.

12.5.  extracttext capability

   To: iana@iana.org
   Subject: Registration of new Sieve extension

   Capability name: extracttext
   Description: adds the "extracttext" action for extracting text from a

   MIME body part.

   RFC number: RFC 5703
   Contact address: The Sieve discussion list
   <ietf-mta-filters@imc.org>.

13.  References

13.1.  Normative References

   [RFC2045]  Freed, N. and N. Borenstein, "Multipurpose Internet Mail
              Extensions (MIME) Part One: Format of Internet Message
              Bodies", RFC 2045, November 1996.

   [RFC2047]  Moore, K., "MIME (Multipurpose Internet Mail Extensions)
              Part Three: Message Header Extensions for Non-ASCII Text",
              RFC 2047, November 1996.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC2231]  Freed, N. and K. Moore, "MIME Parameter Value and Encoded
              Word Extensions:
              Character Sets, Languages, and Continuations", RFC 2231,
              November 1997.

Hansen & Daboo              Standards Track                    [Page 16]
RFC 5703                 Sieve MIME Operations              October 2009

   [RFC3629]  Yergeau, F., "UTF-8, a transformation format of ISO
              10646", STD 63, RFC 3629, November 2003.

   [RFC5173]  Degener, J. and P. Guenther, "Sieve Email Filtering: Body
              Extension", RFC 5173, April 2008.

   [RFC5228]  Guenther, P. and T. Showalter, "Sieve: An Email Filtering
              Language", RFC 5228, January 2008.

   [RFC5229]  Homme, K., "Sieve Email Filtering: Variables Extension",
              RFC 5229, January 2008.

   [RFC5231]  Segmuller, W. and B. Leiba, "Sieve Email Filtering:
              Relational Extension", RFC 5231, January 2008.

   [RFC5293]  Degener, J. and P. Guenther, "Sieve Email Filtering:
              Editheader Extension", RFC 5293, August 2008.

   [RFC5322]  Resnick, P., Ed., "Internet Message Format", RFC 5322,
              October 2008.

13.2.  Informative References

   [RFC1991]  Atkins, D., Stallings, W., and P. Zimmermann, "PGP Message
              Exchange Formats", RFC 1991, August 1996.

   [RFC3851]  Ramsdell, B., "Secure/Multipurpose Internet Mail
              Extensions (S/MIME) Version 3.1 Message Specification",
              RFC 3851, July 2004.

   [RFC4871]  Allman, E., Callas, J., Delany, M., Libbey, M., Fenton,
              J., and M. Thomas, "DomainKeys Identified Mail (DKIM)
              Signatures", RFC 4871, May 2007.

   [RFC4880]  Callas, J., Donnerhacke, L., Finney, H., Shaw, D., and R.
              Thayer, "OpenPGP Message Format", RFC 4880, November 2007.

Hansen & Daboo              Standards Track                    [Page 17]
RFC 5703                 Sieve MIME Operations              October 2009

Authors' Addresses

   Tony Hansen
   AT&T Laboratories
   200 Laurel Ave.
   Middletown, NJ  07748
   USA

   EMail: tony+sieveloop@maillennium.att.com

   Cyrus Daboo
   Apple Inc.
   1 Infinite Loop
   Cupertino, CA  95014
   USA

   EMail: cyrus@daboo.name
   URI:   http://www.apple.com/

Hansen & Daboo              Standards Track                    [Page 18]