[RFC Home] [TEXT|PDF|HTML] [Tracker] [IPR] [Info page]

HISTORIC
Network Working Group                                         D. Rawlins
Request for Comments: 3571                                           MCI
Category: Informational                                      A. Kulkarni
                                                                   Intel
                                                                 K. Chan
                                                         Nortel Networks
                                                            M. Bokaemper
                                                        Juniper Networks
                                                                 D. Dutt
                                                                   Cisco
                                                             August 2003


          Framework Policy Information Base for Usage Feedback

Status of this Memo

   This memo provides information for the Internet community.  It does
   not specify an Internet standard of any kind.  Distribution of this
   memo is unlimited.

Copyright Notice

   Copyright (C) The Internet Society (2003).  All Rights Reserved.

Abstract

   This document describes a portion of the Policy Information Base
   (PIB) to control policy usage collection and reporting in a device.

   The provisioning classes specified here allow a Policy Decision Point
   (PDP) to select which policy objects should collect usage
   information, what information should be collected and when it should
   be reported.

   This PIB requires the presence of other PIBs (defined elsewhere) that
   provide the policy objects from which usage information is collected.














Rawlins, et al.              Informational                      [Page 1]


RFC 3571                 Framework Feedback PIB              August 2003


Table of Contents

   1.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . .  2
   2.  General Concepts . . . . . . . . . . . . . . . . . . . . . . .  3
       2.1.  Selection, Usage and Linkage Policies. . . . . . . . . .  3
       2.2.  Normal Operations. . . . . . . . . . . . . . . . . . . .  4
             2.2.1.  Connection Establishment and Initial
                     Configuration Request. . . . . . . . . . . . . .  4
             2.2.2.  Unsolicited Reports - Periodic Reporting . . . .  5
             2.2.3.  Unsolicited Reports - Reporting Conditions . . .  5
             2.2.4.  Solicited Reports. . . . . . . . . . . . . . . .  6
             2.2.5.  Resuming and Suspending Periodic Feedback
                     Reporting. . . . . . . . . . . . . . . . . . . .  6
             2.2.6.  Failover . . . . . . . . . . . . . . . . . . . .  6
       2.3.  Usage Policy and Under-specified Selection Criteria. . .  7
   3.  Summary of the Feedback Framework Policy Information Base. . .  8
       3.1.  SPPI ACCESS Clause Report-Only . . . . . . . . . . . . .  8
       3.2.  Usage32 and Usage64 Textual Conventions. . . . . . . . .  8
       3.3.  Feedback Groups and PRCs . . . . . . . . . . . . . . . .  9
             3.3.1.  Feedback Action. . . . . . . . . . . . . . . . .  9
             3.3.2.  Feedback Action List . . . . . . . . . . . . . . 10
             3.3.3.  Feedback Linkage Capability. . . . . . . . . . . 10
             3.3.4.  Feedback Linkage . . . . . . . . . . . . . . . . 10
             3.3.5.  Feedback Traffic Statistics Threshold. . . . . . 10
             3.3.6.  Feedback Traffic . . . . . . . . . . . . . . . . 10
             3.3.7.  Feedback Interface Traffic . . . . . . . . . . . 11
             3.3.8.  Feedback RoleCombo Filter Selection. . . . . . . 11
   4.  The Feedback Framework PIB Module. . . . . . . . . . . . . . . 11
   5.  Security Considerations. . . . . . . . . . . . . . . . . . . . 31
   6.  IANA Considerations. . . . . . . . . . . . . . . . . . . . . . 32
   7.  Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 32
   8.  References . . . . . . . . . . . . . . . . . . . . . . . . . . 32
       8.1.  Normative References . . . . . . . . . . . . . . . . . . 32
       8.2.  Informational References . . . . . . . . . . . . . . . . 33
   9.  Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . 34
   10. Full Copyright Statement . . . . . . . . . . . . . . . . . . . 35

1.  Introduction

   The Framework of Common Open Policy Service with Policy Provisioning
   (COPS-PR) Usage Feedback describes the overall approach to policy
   usage monitoring and reporting.  This document defines the specific
   Policy Information Base (PIB) framework for policy usage feedback.
   The policy classes for monitoring and reporting policy usage
   feedback, as well as policy classes for controlling reporting
   intervals, suspension, resumption and solicitation are defined.





Rawlins, et al.              Informational                      [Page 2]


RFC 3571                 Framework Feedback PIB              August 2003


Conventions Used in this Document

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY" and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

2.  General Concepts

2.1.  Selection, Usage and Linkage Policies

   There are three basic types of policies used to define what the PEP
   is to monitor, record and report.  These are the selection criteria
   policy, the usage policy and the feedback report linkage policy.

   The selection criteria policy is installed by the PDP.  It defines
   the conditions used by the PEP to monitor and record a usage policy.
   The selection criteria policy may only be used for defining usage
   feedback selection criteria.  However, a more general case is a
   policy that already exists for policy enforcement that may also be
   used for specifying feedback usage selection criteria.  An example of
   this is the frwkRoleCombo instance, which may be used in defining QoS
   enforcement policies, but may also be used to specify conditions on
   which to base usage - i.e. count the number of packets meeting the
   criterion of an interface capability set name and role combination.

   The usage policy defines what attributes are recorded by the PEP.
   These policies have an ACCESS clause of 'report-only'.  Generally,
   the usage policies specify counts related to a specific action such
   as a packet being dropped.  The feedback framework PIB defines two
   usage policy classes, frwkFeedbackTraffic and frwkFeedbackIfTraffic.
   Usage PRCs may be generic, collecting basic statistics, or they may
   be specific to a particular usage.  The PDP decides which PRC(s) best
   suit(s) its requirements.  The PEP may support only one usage
   feedback PRC, in which case all statistics are gathered using
   instances of that PRC.  Alternatively, the PEP may support multiple
   usage feedback PRCs.  The PDP then decides which PRC to associate
   with a particular selection criterion.

   A usage feedback policy and selection policy are tightly associated
   with one another.  A third policy, the frwkFeedbackLinkTable, is used
   to associate, or provide a linkage for the selection and usage
   policies.  The frwkFeedbackLinkTable also specifies when to report
   the usage feedback.  The frwkFeedbackLinkTable entry permits the same
   selection criteria instance to be re-used for various usage feedback
   policies.  The frwkFeedbackLinkTable contains the value of the
   selection criteria instance as well as the value of the usage
   feedback PRC.




Rawlins, et al.              Informational                      [Page 3]


RFC 3571                 Framework Feedback PIB              August 2003


    -----------------     ------------------      -----------------
   |                 |   |                  |    |                 |
   | Select Criteria |   |Linkage Instance  |    |Usage Instance   |
   |                 |   |-instance ID      |    |- instance ID    |
   | -instance ID    |<--|-PRID of selection|--->|- PRID of Linkage|
   | -conditions...  |   |-PRC of usage     |    |- counts...      |
   |                 |   |                  |    |                 |
    -----------------     ------------------      -----------------

                            Figure 1

   Figure 1 illustrates the relationship between the selection criteria,
   linkage and usage policies.

   The PDP is not aware of the instance identifier of the usage feedback
   policy when installing the selection criteria and feedback linkage
   policies.  The usage feedback policy is instantiated on the PEP by
   the installation of a feedback report linkage and the PEP designates
   the instance identifier.  The usage feedback policy class always
   contains an attribute of type ReferenceId that contains the instance
   value of the associated frwkFeedbackLinkTable instance installed by
   the PDP.  An example of this is the attribute
   frwkFeedbackTrafficLinkRef.

2.2.  Normal Operations

2.2.1.  Connection Establishment and Initial Configuration Request

   The Accounting Timer object in the COPS Connection Accept message
   contains the minimum number of seconds between reporting intervals as
   described in [COPS] and [FEEDBACKFWK].  This is used as the basic
   unit of measurement in defining intervals for specific usage policies
   with the frwkFeedbackLinkInterval attribute.

   The PEP notifies the PDP of the selection criteria policy classes and
   usage policy classes it supports during the initial request for
   configuration data using frwkPRCSupport instances [FR-PIB].  The PEP
   also indicates whether it supports the frwkFeedbackLinkTable as well.

   The PDP responds to the initial request for configuration with a
   DECISION that installs policies.  The PDP may also specify maximum
   reporting intervals associated with each of the usage policies.  This
   is done with the frwkFeedbackLinkInterval attribute in the
   frwkFeedbackLink class.  It may also specify reporting thresholds by
   including an instance of a threshold class (e.g.
   frwkFeedbackTrafficThreshold) in the decision.  The PEP monitors and
   records the usage per the conditions defined by its associated
   selection criteria policy.  Periodically the PEP reports the usage



Rawlins, et al.              Informational                      [Page 4]


RFC 3571                 Framework Feedback PIB              August 2003


   with a REPORT message or provides a REPORT when solicited by the PDP.
   The PDP solicits usage feedback with the frwkFeedbackActionIndicator
   attribute of the frwkFeedbackAction class.

2.2.2.  Unsolicited Reports - Periodic Reporting

   Reporting may be periodic in nature and unsolicited.  The intervals
   at which the unsolicited reports are provided by the PEP are defined
   in the specific Linkage policies.  The defined intervals are based on
   the number of seconds specified by the PDP in the ACCT Timer value.
   The PDP may specify that the associated usage instance be included in
   a periodic unsolicited report only if the threshold is reached and/or
   if the usage value has changed from the previous reporting interval.

   There are cases when the PEP must supply unsolicited feedback reports
   that may not fall on an interval boundary.  The PEP MUST provide an
   unsolicited REPORT containing all defined usage instances just prior
   to the PEP issuing a Delete Request State and just prior to the PEP
   de-activating a PIB instance context.

2.2.3.  Unsolicited Reports - Reporting Conditions

   Periodic unsolicited reports for individual usage feedback instances
   can be suppressed by specifying additional conditions in the
   frwkFeedbackLink instances.  Supported conditions are:

   ChangeOnly
      If this flag is set in the frwkFeedbackLinkFlags attribute, the
      associated usage instance is only included in a periodic
      unsolicited report if its value changed since the last unsolicited
      report.

   Threshold
      If this flag is set in the frwkFeedbackLinkFlags attribute, the
      associated usage instance is only included in a periodic
      unsolicited report if the threshold condition referenced in the
      frwkLinkThreshold field evaluates successfully for the associated
      usage instance.

   Both conditions can be combined in one frwkFeedbackLinkUsage object.
   In this case, both conditions need to succeed for the usage instance
   to be reported.

   Unsolicited reports triggered by a Delete Request State or the
   deactivation of a PIB instance are not subject to these conditions -
   all usage objects must be included in these cases.





Rawlins, et al.              Informational                      [Page 5]


RFC 3571                 Framework Feedback PIB              August 2003


2.2.4.  Solicited Reports

   The PDP may solicit policy usage feedback by issuing an unsolicited
   Decision containing the frwkFeedbackActionIndicator set to
   `solicitReport'.  The PEP is to provide a solicited REPORT feedback
   containing usage feedback.  The PEP shall continue to provide
   periodic feedback at the specified intervals established at client
   connection acceptance.

   The reporting conditions (ChangeOnly and Threshold) do not affect
   solicited reports - all requested usage instances must be included.

2.2.5.  Resuming and Suspending Periodic Feedback Reporting

   The PDP may suspend usage monitoring and tracking at the PEP with the
   frwkFeedbackActionIndicator set to 'suspendMonitoringAndReports'.
   The PEP must stop tracking usage information and must not issue any
   feedback reports.  The PDP may only suspend feedback reporting by
   setting the ActionIndicator to 'suspendReports'.  The PEP must cease
   sending unsolicited reports but is to continue monitoring and
   tracking usage.  The PDP may resume the sending of feedback reports
   and may resume usage monitoring by setting the ActionIndicator to
   'resume'.

   The PDP may suspend or resume all usage instances or the PDP may
   specify one or more instances that are to be suspended or resumed.
   The frwkFeedbackActionList attribute contains a tag identifier that
   references a list of one or more frwkFeedbackActionList instances.

   The PDP may halt usage monitoring, tracking and reporting of usage
   policies by removing the associated Linkage entry.

2.2.6.  Failover

   In the event that the connection is lost between the PEP and PDP, the
   PEP continues to track usage information as long as it continues to
   operate with the installed policy.  When the locally installed policy
   at the PEP expires, the usage policy data also expires.

   Upon successful reconnection where the PEP is still caching policy,
   the PDP indicates to the PEP that the PEP may resume sending of the
   COPS accounting type report messages.  The PDP does this by issuing
   an unsolicited decision containing the frwkFeedbackResumeIndicator
   set to 'resume'.  The PEP should resume reporting at the next
   appropriate feedback interval established upon the acceptance of the
   re-connection.  The PDP is aware of the request state Handle(s) and





Rawlins, et al.              Informational                      [Page 6]


RFC 3571                 Framework Feedback PIB              August 2003


   the supported PRCs either through the state synchronization mechanism
   or because the PDP considers itself synchronized with the PEP upon
   reconnection.

2.3.  Usage Policy and Under-specified Selection Criteria

   Some of the usage policy objects created in the PEP with COPS-PR can
   be used by the PEP multiple times - they effectively act as templates
   for the objects created by the PEP.  COPS-PR only has the identity
   (OID) of the object that is shared between all the assignments the
   PEP created.  However it is desirable to collect usage information
   for each of the derived objects individually.

   This capability is achieved in the feedback framework PIB by
   distributing additional information to qualify a specific assignment
   of an object between the selection criteria PRC and the feedback
   usage PRC.

   A selection criteria PRC that refers to a shared object, but contains
   no qualifying information, selects all of the object's assignments.
   Such a selection criteria PRC SHOULD be combined with a feedback
   usage PRC that includes all the necessary information to identify a
   specific assignment - a single selection criteria policy can then
   result in the generation of many feedback usage objects, one for each
   derived object.

   If the selection criteria PRC contains all the required qualifying
   attributes for a specific assignment, it is combined with a feedback
   usage PRC that only contains the desired metrics but no additional
   attributes.

   Example:

      A frwkRoleCombo instance may be used as a selection criteria,
      identifying a set of interfaces through their role combination and
      capability set.  If it is desired to get per-interface traffic
      statistics, the usage PRC has to include an additional attribute
      to qualify the specific interface.

      This could be achieved by linking the frwkFeedbackIfTraffic class
      with a frwkRoleCombo instance in a frwkFeedbackLink instance.
      Multiple frwkFeedbackIfTraffic instances will be created by the
      PEP, one for each interface selected by the frwkRoleCombo
      instance.  The frwkFeedbackIfTraffic class contains the
      frwkFeedbackIfTrafficIfIndex attribute that allows the PDP to
      identify each interface's individual counters when the PEP reports
      the frwkFeedbackIfTraffic instances.




Rawlins, et al.              Informational                      [Page 7]


RFC 3571                 Framework Feedback PIB              August 2003


      If traffic usage collection is only desired for an individual
      interface, a selection criteria should be used that qualifies the
      interface completely, for example a frwkIfRoleCombo instance.  In
      this case, it can be linked to the usage class that has no
      additional qualifying attributes, frwkFeedbackTraffic.

3.  Summary of the Feedback Framework Policy Information Base

3.1.  SPPI ACCESS Clause Report-Only

   The selection criteria and linkage policy classes follow the
   definitions specified by [SPPI].  This structure specifies well-
   defined policy classes and their instances residing in a common,
   virtual repository [FR-PIB].  The additional PIB-ACCESS clause
   attribute of "report-only" denotes the usage policy class reported by
   the PEP.

3.2.  Usage32 and Usage64 Textual Conventions

   The SPPI does not support the Counter32/64 textual conventions (TC)
   of SNMP - for feedback collection two similar textual conventions
   have been defined in this PIB: Usage32 and Usage64.

   In addition to the differential functionality of 'Counter', where
   only the difference between two samples generally carries
   information, a single value of a 'Usage' attribute usually provides
   absolute information, since

   -  its initial value is known (0)
   -  no wrap-around events should occur
   -  the time or event when the initial value was set should be
      available directly or indirectly from other objects.

   When 'Usage' attributes are defined in a PRC, events that could cause
   a reset of the attribute to its initial value should be defined in
   the description as well as the mechanism that allows the PDP to
   detect the time of the last reset.

   No usual COPS activity however should cause the reset of a Usage
   attribute.  In the case of a suspension of monitoring activity
   (frwkFeedbackActionIndicator set to 'suspendMonitoringAndReports'),
    'Usage' attributes should keep their values and continue counting
   after monitoring is resumed.








Rawlins, et al.              Informational                      [Page 8]


RFC 3571                 Framework Feedback PIB              August 2003


3.3.  Feedback Groups and PRCs

   These policy classes defined in this PIB are common to account type
   reporting for various technologies and apply to ALL SUBJECT-
   CATEGORIES.  The policy classes are divided into three new groups,
   namely, The Feedback Report Group, The Feedback Usage Group and The
   Feedback Selection Group.

   The policy classes in the Feedback Report Group are:

   -  Feedback Action
   -  Feedback Action List
   -  Feedback Selection Usage Combination Capability
   -  Feedback Linkage
   -  Feedback Traffic Statistics Threshold

   The policy classes in the Feedback Usage Group are:

   -  Feedback Traffic
   -  Feedback Interface Traffic

   The policy class in the Feedback Selection Group is:

   -  Feedback RoleCombo Filter Selection

3.3.1.  Feedback Action

   The Feedback Action class contains the attributes that specify action
   that the PEP is to take regarding policy usage, monitoring and
   tracking.  The PDP may suspend usage monitoring and periodic
   reporting, suspend periodic reporting only, resume usage and periodic
   reporting or solicit immediate reporting.  The action may affect all
   feedback policies or be associated with one or more frwkFeedbackLink
   instances.

   The frwkFeedbackActionIndicator attribute defines the action.  The
   frwkFeedbackActionPri attribute indicates whether the action applies
   to all of the usage policies or to a list.  The
   frwkFeedbackActionList attribute is the identifier of the list of
   Linkage policy instances to which the action is to be applied.

   The PDP can solicit the PEP for immediate usage feedback.  The PEP
   shall respond with a solicited report containing the usage feedback.

   The PDP can direct the resumption of usage monitoring and reporting
   per the defined intervals.  For example, the PEP may have re-
   connected to a PDP and has cached usage policies.  The PDP indicates
   to the PEP to resume usage tracking and monitoring and to send all



Rawlins, et al.              Informational                      [Page 9]


RFC 3571                 Framework Feedback PIB              August 2003


   the cached usage policy.  The PEP shall respond at the next
   appropriate interval with an unsolicited report containing the usage
   feedback.

   The PDP can suspend the monitoring of usage policy.  The PEP
   maintains the current usage that has been monitored, but discontinues
   any further monitoring until the PDP directs the PEP to resume
   monitoring in a subsequent Decision.

   The PDP can also suspend just the reporting of usage, but not
   interrupt the monitoring and tracking of usage.  The PEP shall
   discontinue sending Report messages with usage feedback until the PDP
   directs the PEP to resume.  The PEP then begins reporting the usage
   feedback at the next interval.

3.3.2.  Feedback Action List

   This class defines sets of linkage instances that can be referred to
   from the frwkFeedbackActionList attribute.

3.3.3.  Feedback Linkage Capability

   This class defines the valid selection criteria PRC, usage PRC and
   threshold PRC combinations supported by the PEP.

3.3.4.  Feedback Linkage

   This class links the selection criteria instance with the usage
   class.  This table permits the reuse of a selection criteria instance
   for multiple usage policies.

   The linkage table also permits the definition of a maximum reporting
   interval to use when issuing the COPS accounting type reports for the
   usage instance.  A value of 0 in this attribute indicates that the
   usage policy must be solicited.

3.3.5.  Feedback Traffic Statistics Threshold

   This class is used to provide threshold values for the attributes
   described in the traffic usage classes below.

3.3.6.  Feedback Traffic

   This class includes the packet counts, byte counts and a reference to
   the associated Linkage instance.






Rawlins, et al.              Informational                     [Page 10]


RFC 3571                 Framework Feedback PIB              August 2003


3.3.7.  Feedback Interface Traffic

   This class is similar to the previous Feedback Traffic class, except
   that it includes an additional reference to an interface index.  This
   class should be used with a selection criteria instance that matches
   an element that is assigned to multiple interfaces.  The interface
   field can be used to associate the instances of this table with the
   specific element's assignment.

3.3.8.  Feedback RoleCombo Filter Selection

   This class is used as selection criteria based on role combination,
   capability set and a filter instance.

4.  The Feedback Framework PIB Module

   FRAMEWORK-FEEDBACK-PIB PIB-DEFINITIONS ::= BEGIN

      IMPORTS
          pib, Unsigned32, Unsigned64, Integer32,
          MODULE-IDENTITY, OBJECT-TYPE, MODULE-COMPLIANCE, OBJECT-GROUP
                  FROM COPS-PR-SPPI
          TruthValue, TEXTUAL-CONVENTION
                  FROM SNMPv2-TC
          InstanceId, ReferenceId, Prid,
          TagId, TagReferenceId
                  FROM COPS-PR-SPPI-TC
          PrcIdentifierOid, PrcIdentifierOidOrZero
                  FROM FRAMEWORK-TC-PIB
          frwkRoleComboEntry
                  FROM FRAMEWORK-PIB
          InterfaceIndex
                  FROM IF-MIB;

      frwkFeedbackPib  MODULE-IDENTITY
          SUBJECT-CATEGORIES  { all }
          LAST-UPDATED "200307140000Z"  -- 14 July 2003
          ORGANIZATION "IETF RAP WG"
          CONTACT-INFO "IETF RAP WG
                        Email: rap@ops.ietf.org

                        Diana Rawlins
                        MCI
                        400 International Parkway
                        Richardson, Texas 75081
                        Phone: 972-729-4071
                        Email: Diana.Rawlins@mci.com




Rawlins, et al.              Informational                     [Page 11]


RFC 3571                 Framework Feedback PIB              August 2003


                        Amol Kulkarni
                        JF3-206
                        2111 NE 25th Ave
                        Hillsboro, Oregon 97124
                        Phone: 503-712-1168
                        Email: amol.kulkarni@intel.com

                        Kwok Ho Chan
                        Nortel Networks
                        600 Technology Park Drive
                        Billerica, MA 01821 USA
                        Phone: 978-288-8175
                        Email: khchan@nortelnetworks.com

                        Martin Bokaemper
                        Juniper Networks
                        700 Silver Seven Road
                        Kanata, ON, K2V 1C3, Canada
                        Phone: 613-591-2735
                        Email: mbokaemper@juniper.net

                        Dinesh G Dutt
                        Cisco Systems, Inc.
                        170 Tasman Dr.
                        San Jose, CA 95134-1706
                        Phone: 408-527-0955
                        Email: ddutt@cisco.com"

      DESCRIPTION
              "The PIB module containing the base set of policy rule
              classes that are required for support of all policy
              usage monitoring, tracking and reporting policies.

              Copyright (C) The Internet Society (2003). This version
              of this PIB module is part of RFC 3571; see the RFC
              itself for full legal notices."
      REVISION     "200307140000Z"
      DESCRIPTION
               "Initial version, published in RFC 3571."

            ::= { pib 5 }

   --
   -- Textual Conventions
   --

   Usage32 ::= TEXTUAL-CONVENTION
        STATUS    current



Rawlins, et al.              Informational                     [Page 12]


RFC 3571                 Framework Feedback PIB              August 2003


        DESCRIPTION
                "The Usage32 type represents a non-negative integer
                which monotonically increases.
                Usage32 initial value is 0 and the object-type using
                Usage32 needs to specify when it is initialized.

                The Usage32 type is intended to reflect the absolute
                number of counted events, so that even a new PDP
                after a COPS reconnect can use the value directly.

                If there is the possibility that the maximum Usage32
                value of 2^32-1 is exceeded during the lifetime
                of the Usage32 object, the larger Usage64 type
                should be used.

                If conditions other than the reset of the COPS
                subsystem exist that disrupt the monotonic
                characteristics of Usage32, these conditions and a
                method how to detect their presence should be
                specified in the description of the object-type using
                Usage32 or its enclosing object-types (e.g. the
                Entry or Table object-type of the Usage32
                object-type).

                Whenever the monotonic increase of Usage32 is violated,
                it should be reset to 0 and the fact that this occurred
                should be indicated through an appropriate mechanism,
                for example a corresponding object of type TimeStamp
                or TimeAndDate."
        SYNTAX Unsigned32

   Usage64 ::= TEXTUAL-CONVENTION
        STATUS    current
        DESCRIPTION
                "The Usage64 type represents a non-negative integer
                which monotonically increases.
                Usage64 initial value is 0 and the object-type using
                Usage64 needs to specify when it is initialized.

                The Usage64 type is intended to reflect the absolute
                number of counted events, so that even a new PDP
                after a COPS reconnect can use the value directly.

                The lifetime of the Usage64 object should be defined
                in a way that ensures the maximum Usage64 value of
                2^64-1 is never exceeded.

                If conditions other than the reset of the COPS



Rawlins, et al.              Informational                     [Page 13]


RFC 3571                 Framework Feedback PIB              August 2003


                subsystem exist that disrupt the monotonic
                characteristics of Usage64, these conditions and a
                method how to detect their presence should be
                specified in the description of the object-type using
                Usage64 or its enclosing object-types (e.g. the
                Entry or Table object-type of the Usage64
                object-type).

                Whenever the monotonic increase of Usage64 is violated,
                it should be reset to 0 and the fact that this occurred
                should be indicated through an appropriate mechanism,
                for example a corresponding object of type TimeStamp
                or TimeAndDate."
        SYNTAX Unsigned64

   --
   -- The feedback report group
   --

   frwkFeedbackGroupClasses
                  OBJECT IDENTIFIER ::= { frwkFeedbackPib  1 }

   --
   --  Feedback Action Table
   --

   frwkFeedbackActionTable OBJECT-TYPE
        SYNTAX          SEQUENCE OF FrwkFeedbackActionEntry
        PIB-ACCESS      install
        STATUS          current
        DESCRIPTION
                "This class represents commands that the PDP sends to
                suspend, resume or solicit collection or reporting of
                usage data."

           ::= { frwkFeedbackGroupClasses  1}

   frwkFeedbackActionEntry OBJECT-TYPE
        SYNTAX  FrwkFeedbackActionEntry
        STATUS  current
        DESCRIPTION
                "Each frwkFeedbackActionEntry represents a command from
                the PDP. FrwkFeedbackActionIndicator specifies the
                command itself while frwkFeedbackActionSpecificPri
                indicates if all frwkFeedbackLink objects in the system
                are affected by the command, or just the set that is
                referenced by frwkFeedbackActionList."




Rawlins, et al.              Informational                     [Page 14]


RFC 3571                 Framework Feedback PIB              August 2003


        PIB-INDEX { frwkFeedbackActionId}

        ::= { frwkFeedbackActionTable 1}

   FrwkFeedbackActionEntry ::= SEQUENCE {
           frwkFeedbackActionId                 InstanceId,
           frwkFeedbackActionIndicator          INTEGER,
           frwkFeedbackActionSpecificPri        TruthValue,
           frwkFeedbackActionList               TagReferenceId
        }

   frwkFeedbackActionId  OBJECT-TYPE
        SYNTAX        InstanceId
        STATUS        current
        DESCRIPTION
           "An arbitrary integer index that uniquely identifies an
            instance of the frwkFeedbackAction class."

        ::= { frwkFeedbackActionEntry 1}

   frwkFeedbackActionIndicator OBJECT-TYPE
        SYNTAX  INTEGER {
                   suspendMonitoringAndReports(1),
                   suspendReports(2),
                   resume(3),
                   solicitReport(4)
        }
        STATUS  current
        DESCRIPTION
                  "The value indicates if the PEP is to send cached
                   usage policies via COPS accounting type report
                   messages.
                   The enumeration values are:
                   (1)  suspendMonitoringAndReports
                   (2)  suspendReports
                   (3)  resume
                   (4)  solicitReport "

          ::= { frwkFeedbackActionEntry 2 }

   frwkFeedbackActionSpecificPri OBJECT-TYPE
           SYNTAX        TruthValue
           STATUS        current
           DESCRIPTION
                    "A value of 0 indicates that the
                    frwkFeedbackActionList attribute should be ignored,
                    and the action applied to all policies. A value of
                    1 indicates that the action entry has a specific



Rawlins, et al.              Informational                     [Page 15]


RFC 3571                 Framework Feedback PIB              August 2003


                    list of policies to which it is to be applied."
           ::= { frwkFeedbackActionEntry 3}

   frwkFeedbackActionList OBJECT-TYPE
           SYNTAX        TagReferenceId
           PIB-TAG       { frwkFeedbackActionListTag }
           STATUS        current
           DESCRIPTION
                    "Identifies a group of frwkFeedbackLink instances
                    that this action should affect. The group is
                    identified through a tag reference in the
                    frwkFeedbackList class."
           ::= { frwkFeedbackActionEntry 4}

   --
   --  Feedback Action List Table
   --

   frwkFeedbackActionListTable OBJECT-TYPE
           SYNTAX          SEQUENCE OF FrwkFeedbackActionListEntry
           PIB-ACCESS      install
           STATUS          current
           DESCRIPTION
                    "This class defines groups of linkage instances.
                    Groups can be referenced by commands sent by the
                    PDP in a frwkFeedbackActionEntry -in this case the
                    command affects all linkage instances that are part
                    of the group.
                    A group can be referred to by its tag stored in
                    frwkFeedbackActionListTag."
           ::= { frwkFeedbackGroupClasses  2}

   frwkFeedbackActionListEntry OBJECT-TYPE
           SYNTAX          FrwkFeedbackActionListEntry
           STATUS          current
           DESCRIPTION
                    "Each instance associates a linkage instance with a
                     specific ActionListGroup."

           PIB-INDEX {frwkFeedbackActionListId }
           UNIQUENESS { frwkFeedbackActionListTag,
                        frwkFeedbackActionListRefID
                      }
           ::= { frwkFeedbackActionListTable 1}

   FrwkFeedbackActionListEntry::= SEQUENCE {
              frwkFeedbackActionListId          InstanceId,
              frwkFeedbackActionListTag         TagId,



Rawlins, et al.              Informational                     [Page 16]


RFC 3571                 Framework Feedback PIB              August 2003


              frwkFeedbackActionListRefID       ReferenceId
        }

   frwkFeedbackActionListId OBJECT-TYPE
           SYNTAX       InstanceId
           STATUS       current
           DESCRIPTION
                     "Arbitrary integer index that uniquely
                     identifies an instance of the class."

           ::= { frwkFeedbackActionListEntry 1 }

   frwkFeedbackActionListTag OBJECT-TYPE
           SYNTAX       TagId
           STATUS       current
           DESCRIPTION
                     "Identifies a group of linkage instances that can
                     be referenced from the Action class."

           ::= { frwkFeedbackActionListEntry 2 }

   frwkFeedbackActionListRefID   OBJECT-TYPE
           SYNTAX       ReferenceId
           PIB-REFERENCES { frwkFeedbackLinkEntry }
           STATUS       current
           DESCRIPTION
                     "A frwkFeedbackLink instance that is referred to
                     by this ReferenceId becomes part of the group,
                     that is identified by the
                     frwkFeedbackActionListTag."

           ::= { frwkFeedbackActionListEntry 3 }

   --
   -- The Feedback Link Capability Table
   --

   frwkFeedbackLinkCapsTable OBJECT-TYPE
        SYNTAX           SEQUENCE OF FrwkFeedbackLinkCapsEntry
        PIB-ACCESS       notify
        STATUS           current
        DESCRIPTION
                "Instances of the frwkFeedbackLink class reference
                 instances of selection and threshold classes and a
                 usage class.
                 This class allows the PEP to communicate valid
                 combinations of these three classes to the PDP."
         ::= { frwkFeedbackGroupClasses 3}



Rawlins, et al.              Informational                     [Page 17]


RFC 3571                 Framework Feedback PIB              August 2003


   frwkFeedbackLinkCapsEntry OBJECT-TYPE
        SYNTAX          FrwkFeedbackLinkCapsEntry
        STATUS          current
        DESCRIPTION
                 "The attributes of this class identify valid
                  combinations of selection criteria, usage and
                  threshold classes for feedback."
        PIB-INDEX { frwkFeedbackLinkCapsId }
        UNIQUENESS {
                    frwkFeedbackLinkCapsSelection,
                    frwkFeedbackLinkCapsUsage,
                    frwkFeedbackLinkCapsThreshold
                 }

        ::= {frwkFeedbackLinkCapsTable 1}

   FrwkFeedbackLinkCapsEntry ::= SEQUENCE {
          frwkFeedbackLinkCapsId         InstanceId,
          frwkFeedbackLinkCapsSelection  PrcIdentifierOid,
          frwkFeedbackLinkCapsUsage      PrcIdentifierOid,
          frwkFeedbackLinkCapsThreshold  PrcIdentifierOidOrZero
   }

   frwkFeedbackLinkCapsId OBJECT-TYPE
        SYNTAX        InstanceId
        STATUS        current
        DESCRIPTION
             "An arbitrary integer index that uniquely identifies an
             instance of the frwkFeedbackLinkCaps class."
        ::= { frwkFeedbackLinkCapsEntry 1}

   frwkFeedbackLinkCapsSelection OBJECT-TYPE
        SYNTAX        PrcIdentifierOid
        STATUS        current
        DESCRIPTION
               "The identifier of a class that is supported by the
                device for feedback selection in combination with the
                usage and threshold classes referenced in this
                instance."
        ::= { frwkFeedbackLinkCapsEntry 2}

   frwkFeedbackLinkCapsUsage OBJECT-TYPE
        SYNTAX        PrcIdentifierOid
        STATUS        current
        DESCRIPTION
                "The identifier of the usage class that is supported by
                the PEP in combination with the selection and threshold
                classes referenced in this instance."



Rawlins, et al.              Informational                     [Page 18]


RFC 3571                 Framework Feedback PIB              August 2003


        ::= { frwkFeedbackLinkCapsEntry 3}


   frwkFeedbackLinkCapsThreshold OBJECT-TYPE
           SYNTAX        PrcIdentifierOidOrZero
           STATUS        current
           DESCRIPTION
                "The identifier of the threshold class that is
                supported by the PEP in combination with the selection
                and usage classes referenced in this instance.
                0.0 is used if this combination does not allow a
                threshold."
           ::= { frwkFeedbackLinkCapsEntry 4}

   --
   -- The Feedback Report Linkage Table
   --

   frwkFeedbackLinkTable OBJECT-TYPE
        SYNTAX          SEQUENCE OF FrwkFeedbackLinkEntry
        PIB-ACCESS      install
        STATUS          current
        DESCRIPTION
                 "This class associates the selection criteria with the
                  usage policy. It also permits the defining of the max
                  interval used for reporting the usage instance."

        ::= { frwkFeedbackGroupClasses  4}

   frwkFeedbackLinkEntry OBJECT-TYPE
        SYNTAX          FrwkFeedbackLinkEntry
        STATUS          current
        DESCRIPTION
                 "This class associates the selection criteria with the
                  usage policy. It also permits the defining of the max
                  interval used for reporting the usage instance."
        PIB-INDEX { frwkFeedbackLinkId }
        UNIQUENESS {frwkFeedbackLinkSel,
                    frwkFeedbackLinkUsage }
        ::= {frwkFeedbackLinkTable 1}

   FrwkFeedbackLinkEntry ::= SEQUENCE {
          frwkFeedbackLinkId         InstanceId,
          frwkFeedbackLinkSel        Prid,
          frwkFeedbackLinkUsage      PrcIdentifierOid,
          frwkFeedbackLinkInterval   Integer32,
          frwkFeedbackLinkThreshold  Prid,
          frwkFeedbackLinkFlags      BITS



Rawlins, et al.              Informational                     [Page 19]


RFC 3571                 Framework Feedback PIB              August 2003


   }

   frwkFeedbackLinkId OBJECT-TYPE
        SYNTAX        InstanceId
        STATUS        current
        DESCRIPTION
            "An arbitrary integer index that uniquely identifies an
             instance of the frwkFeedbackLinkTable class."
        ::= { frwkFeedbackLinkEntry 1}

   frwkFeedbackLinkSel OBJECT-TYPE
        SYNTAX       Prid
        STATUS       current
        DESCRIPTION
            "The PRID of the Policy Class instance as the monitoring
             point, or the PRID of the selection criteria instance that
             defines the conditions for monitoring, to be use by the
             PEP for usage reporting."

        ::= { frwkFeedbackLinkEntry 2}

   frwkFeedbackLinkUsage OBJECT-TYPE
        SYNTAX      PrcIdentifierOid
        STATUS      current
        DESCRIPTION
             "The identifier of the usage class that the PEP uses to
             monitor, record and report."

        ::= { frwkFeedbackLinkEntry 3}

   frwkFeedbackLinkInterval  OBJECT-TYPE
        SYNTAX   Integer32
        STATUS   current
        DESCRIPTION
                "Maximum interval in units of the value of the
                 Accounting Timer specified by the PDP in the client
                 accept message. A frwkFeedbackLinkInterval of 1 is
                 equal to the value of the Accounting Timer. This value
                 must be 1 or greater. "

        ::= { frwkFeedbackLinkEntry 4}

   frwkFeedbackLinkThreshold  OBJECT-TYPE
        SYNTAX   Prid
        STATUS   current
        DESCRIPTION
                "The PRID of a threshold class instance. This instance
                 specifies the threshold values for the usage policy."



Rawlins, et al.              Informational                     [Page 20]


RFC 3571                 Framework Feedback PIB              August 2003


        ::= { frwkFeedbackLinkEntry 5}

   frwkFeedbackLinkFlags  OBJECT-TYPE
        SYNTAX   BITS {
                         periodic(0),
                         threshold(1),
                         changeOnly(2)
                 }
        STATUS   current
        DESCRIPTION
               "This value indicates the reporting basis of the usage
                 policy. The feed back may be generated on demand, on a
                 periodic basis regardless of a change in value from the
                 previous report, on a periodic basis if a change in
                 value has occurred, or the usage is reported when an
                 identified threshold value in the usage instance has
                 been reached.
                If the 'periodic' flag is set, the PEP will provide
                 unsolicited reports at the rate specified in
                 frwkFeedbackLinkInterval.
                If the 'periodic' flag is not set, reports will only be
                 generated when solicited by the PDP.
                The 'threshold' and 'changeOnly' flags make the
                 periodic reports conditional - these flags only make
                 sense in combination with the 'periodic' flag."

           ::= { frwkFeedbackLinkEntry 6}

   --
   -- The Threshold class that accompanies the above Usage PRCs
   --

   frwkFeedbackTrafficThresTable OBJECT-TYPE
           SYNTAX         SEQUENCE OF FrwkFeedbackTrafficThresEntry
           PIB-ACCESS     install
           STATUS         current
           DESCRIPTION
                 "This class defines the threshold attributes
                  corresponding to usage attributes specified in
                  frwkFeedbackTrafficTable, frwkFeedbackIfTrafficTable
                  and other similar usage classes.

                  The usage object is considered to match the threshold
                  condition if at least one of the packet or byte
                  threshold conditions match.

                  The byte and packet thresholds are considered to
                  match, if the threshold is present (not ASN1 NULL)



Rawlins, et al.              Informational                     [Page 21]


RFC 3571                 Framework Feedback PIB              August 2003


                  and the corresponding usage value exceeds the
                  threshold."

           ::= { frwkFeedbackGroupClasses  5}

   frwkFeedbackTrafficThresEntry OBJECT-TYPE
           SYNTAX          FrwkFeedbackTrafficThresEntry
           STATUS          current
           DESCRIPTION
                    "Defines the attributes to hold threshold values."
           PIB-INDEX {frwkFeedbackTrafficThresId}

           ::= {frwkFeedbackTrafficThresTable 1}

   FrwkFeedbackTrafficThresEntry ::= SEQUENCE {
            frwkFeedbackTrafficThresId                  InstanceId,
            frwkFeedbackTrafficThresPackets            Unsigned64,
            frwkFeedbackTrafficThresBytes              Unsigned64
   }

   frwkFeedbackTrafficThresId   OBJECT-TYPE
           SYNTAX       InstanceId
           STATUS       current
           DESCRIPTION
                     "Arbitrary integer index that uniquely identifies
                      an instance of the class."
           ::= { frwkFeedbackTrafficThresEntry 1 }

   frwkFeedbackTrafficThresPackets   OBJECT-TYPE
           SYNTAX       Unsigned64
           STATUS       current
           DESCRIPTION
                     "The threshold, in terms of packets, that must be
                      matched or exceeded to trigger a report in the
                      next reporting interval."
           ::= { frwkFeedbackTrafficThresEntry 2 }

   frwkFeedbackTrafficThresBytes   OBJECT-TYPE
           SYNTAX       Unsigned64
           STATUS       current
           DESCRIPTION
                   "The threshold, in terms of bytes, that must be
                    exceeded to trigger a report in the next reporting
                    interval."
           ::= { frwkFeedbackTrafficThresEntry 3 }


   --



Rawlins, et al.              Informational                     [Page 22]


RFC 3571                 Framework Feedback PIB              August 2003


   -- All actual usage classes are in the separate
   -- frwkFeedbackUsageClasses group
   --

   frwkFeedbackUsageClasses
       OBJECT IDENTIFIER ::= { frwkFeedbackPib  2 }


   --
   -- The generic traffic (byte & packet count) usage class
   --

   frwkFeedbackTrafficTable OBJECT-TYPE
        SYNTAX          SEQUENCE OF FrwkFeedbackTrafficEntry
        PIB-ACCESS      report-only
        STATUS          current
        DESCRIPTION
                 "This class defines the usage attributes that the PEP
                  is to monitor for plain traffic handling elements
                  like filters. All packets and the bytes contained in
                  these packets are counted. It also contains the PRID
                  of the linkage instance associating the selection
                  criteria instance with the usage instance."

        ::= { frwkFeedbackUsageClasses  1}

   frwkFeedbackTrafficEntry OBJECT-TYPE
        SYNTAX          FrwkFeedbackTrafficEntry
        STATUS          current
        DESCRIPTION
                 "Defines the attributes the PEP is to monitor,
                  record and report."
        PIB-INDEX {frwkFeedbackTrafficId}
        UNIQUENESS { frwkFeedbackTrafficLinkRefID }

        ::= {frwkFeedbackTrafficTable 1}

   FrwkFeedbackTrafficEntry ::= SEQUENCE {
         frwkFeedbackTrafficId              InstanceId,
         frwkFeedbackTrafficLinkRefID       ReferenceId,
         frwkFeedbackTrafficPacketCount     Usage64,
         frwkFeedbackTrafficByteCount       Usage64

   }

   frwkFeedbackTrafficId   OBJECT-TYPE
        SYNTAX       InstanceId
        STATUS       current



Rawlins, et al.              Informational                     [Page 23]


RFC 3571                 Framework Feedback PIB              August 2003


        DESCRIPTION
                  "Arbitrary integer index that uniquely identifies
                   an instance of the class."
        ::= { frwkFeedbackTrafficEntry 1 }

   frwkFeedbackTrafficLinkRefID  OBJECT-TYPE
        SYNTAX      ReferenceId
        PIB-REFERENCES { frwkFeedbackLinkEntry }
        STATUS      current
        DESCRIPTION
                  "The ReferenceId of the Linkage policy instance used
                   to base this usage policy instance upon."

        ::= { frwkFeedbackTrafficEntry 2 }

   frwkFeedbackTrafficPacketCount OBJECT-TYPE
        SYNTAX       Usage64
        STATUS       current
        DESCRIPTION
                  "The count of packets handled by the associated
                   element. The initial value of 0 is set when the
                   frwkFeedbackTraffic instance is created, for example
                   triggered through the creation of a frwkFeedbackLink
                   instance."

        ::= {frwkFeedbackTrafficEntry 3}

   frwkFeedbackTrafficByteCount OBJECT-TYPE
        SYNTAX       Usage64
        STATUS       current
        DESCRIPTION
                   "The byte count of packets handled by the associated
                    element. The initial value of 0 is set when the
                    frwkFeedbackTraffic instance is created."
        ::= { frwkFeedbackTrafficEntry 4}



   --
   -- The traffic usage class, qualified for an interface
   --
   frwkFeedbackIfTrafficTable OBJECT-TYPE
        SYNTAX          SEQUENCE OF FrwkFeedbackIfTrafficEntry
        PIB-ACCESS      report-only
        STATUS          current
        DESCRIPTION
                "A usage class similar to the basic Traffic class that
                also contains a reference to an interface index. This



Rawlins, et al.              Informational                     [Page 24]


RFC 3571                 Framework Feedback PIB              August 2003


                class should be used with an underspecified selection
                criteria entry from the frwkRoleComboTable that matches
                an element that can be assigned to multiple interface
                indices. The interface field can be used to associate
                the instances of this class with the specific element's
                assignment."
        ::= { frwkFeedbackUsageClasses  2 }

   frwkFeedbackIfTrafficEntry OBJECT-TYPE
        SYNTAX          FrwkFeedbackIfTrafficEntry
        STATUS          current
        DESCRIPTION
                 "Defines the attributes the PEP is to monitor,
                  record and report."
        PIB-INDEX {frwkFeedbackIfTrafficId}
        UNIQUENESS { frwkFeedbackIfTrafficLinkRefID,
                     frwkFeedbackIfTrafficIfIndex }

        ::= {frwkFeedbackIfTrafficTable 1}

   FrwkFeedbackIfTrafficEntry ::= SEQUENCE {
         frwkFeedbackIfTrafficId              InstanceId,
         frwkFeedbackIfTrafficLinkRefID       ReferenceId,
         frwkFeedbackIfTrafficIfIndex         InterfaceIndex,
         frwkFeedbackIfTrafficPacketCount     Usage64,
         frwkFeedbackIfTrafficByteCount       Usage64

   }

   frwkFeedbackIfTrafficId   OBJECT-TYPE
        SYNTAX       InstanceId
        STATUS       current
        DESCRIPTION
                  "Arbitrary integer index that uniquely identifies
                   an instance of the class."
        ::= { frwkFeedbackIfTrafficEntry 1 }

   frwkFeedbackIfTrafficLinkRefID  OBJECT-TYPE
        SYNTAX      ReferenceId
        PIB-REFERENCES { frwkFeedbackLinkEntry }
        STATUS      current
        DESCRIPTION
                  "The ReferenceId of the Linkage policy instance used
                   to base this usage policy instance upon."
        ::= { frwkFeedbackIfTrafficEntry 2 }

   frwkFeedbackIfTrafficIfIndex  OBJECT-TYPE
          SYNTAX         InterfaceIndex



Rawlins, et al.              Informational                     [Page 25]


RFC 3571                 Framework Feedback PIB              August 2003


          STATUS         current
          DESCRIPTION
              "The value of this attribute is the ifIndex which is
              associated with the specified RoleCombination and
              interface capability set name."

          ::= { frwkFeedbackIfTrafficEntry 3 }

   frwkFeedbackIfTrafficPacketCount OBJECT-TYPE
        SYNTAX       Usage64
        STATUS       current
        DESCRIPTION
                "The count of packets handled by the associated
                element. The initial value of 0 is set when the
                frwkFeedbackIfTraffic instance is created."
        ::= { frwkFeedbackIfTrafficEntry 4 }

   frwkFeedbackIfTrafficByteCount OBJECT-TYPE
        SYNTAX       Usage64
        STATUS       current
        DESCRIPTION
                  "The byte count of packets handled by the associated
                  element. The initial value of 0 is set when the
                  frwkFeedbackIfTraffic instance is created."
        ::= { frwkFeedbackIfTrafficEntry 5 }


   --
   -- All Selection classes are in the separate
   -- FrwkFeedbackSelectionClasses group
   --

   frwkFeedbackSelectionClasses
       OBJECT IDENTIFIER ::= { frwkFeedbackPib  3 }

   --
   -- The Role Combination Filter Selection Table
   --

   frwkFeedbackRoleFilterSelTable OBJECT-TYPE
        SYNTAX          SEQUENCE OF FrwkFeedbackRoleFilterSelEntry
        PIB-ACCESS      install
        STATUS          current
        DESCRIPTION
                "A selection class that defines selection of objects
                for monitoring based on the role combination,
                capability set and a filter."
        ::= { frwkFeedbackSelectionClasses  1 }



Rawlins, et al.              Informational                     [Page 26]


RFC 3571                 Framework Feedback PIB              August 2003


   frwkFeedbackRoleFilterSelEntry OBJECT-TYPE
        SYNTAX          FrwkFeedbackRoleFilterSelEntry
        STATUS          current
        DESCRIPTION
                "Each instance selects a filter on multiple interfaces
                that share the same frwkRoleCombo instance."
        PIB-INDEX { frwkFeedbackRoleFilterSelId}
        UNIQUENESS { frwkFeedbackRoleFilterSelRCombo,
                     frwkFeedbackRoleFilterSelFilter
                    }

        ::= {frwkFeedbackRoleFilterSelTable 1}

   FrwkFeedbackRoleFilterSelEntry ::= SEQUENCE {
         frwkFeedbackRoleFilterSelId          InstanceId,
         frwkFeedbackRoleFilterSelRCombo      ReferenceId,
         frwkFeedbackRoleFilterSelFilter      Prid
   }

   frwkFeedbackRoleFilterSelId   OBJECT-TYPE
        SYNTAX       InstanceId
        STATUS       current
        DESCRIPTION
                  "Arbitrary integer index that uniquely identifies
                   an instance of the class."
        ::= { frwkFeedbackRoleFilterSelEntry 1 }

   frwkFeedbackRoleFilterSelRCombo  OBJECT-TYPE
        SYNTAX      ReferenceId
        PIB-REFERENCES { frwkRoleComboEntry }
        STATUS      current
        DESCRIPTION
                  "The ReferenceId of the frwkRoleComboTable policy
                   instance used for selection."
        ::= { frwkFeedbackRoleFilterSelEntry 2 }

   frwkFeedbackRoleFilterSelFilter     OBJECT-TYPE
        SYNTAX      Prid
        STATUS      current
        DESCRIPTION
                  "The identifier of a filter instance. Valid classes
                   are the subclasses of frwkBaseFilter:
                   - frwkIpFilter
                   - frwk802Filter
                   - frwkILabelFilter"
        ::= { frwkFeedbackRoleFilterSelEntry 3 }





Rawlins, et al.              Informational                     [Page 27]


RFC 3571                 Framework Feedback PIB              August 2003


   --
   -- Compliance Section
   --

   frwkFeedbackPibConformance
                OBJECT IDENTIFIER ::= { frwkFeedbackPib 4 }

   frwkFeedbackPibCompliances
                OBJECT IDENTIFIER ::= { frwkFeedbackPibConformance 1 }

   frwkFeedbackPibGroups
                OBJECT IDENTIFIER ::= { frwkFeedbackPibConformance 2 }


   frwkFeedbackPibCompliance MODULE-COMPLIANCE
        STATUS  current
        DESCRIPTION
        "Describes the requirements for conformance to the feedback
        framework PIB"

      MODULE   -- this module
         MANDATORY-GROUPS { frwkFeedbackLinkCapsGroup,
                            frwkFeedbackLinkGroup,
                            frwkFeedbackActionGroup }

      GROUP frwkFeedbackActionListGroup
         DESCRIPTION
                      "The frwkFeedbackActionListGroup is mandatory if
                      actions on subsets linkEntries are to be
                      supported."

      GROUP frwkFeedbackTrafficGroup
         DESCRIPTION
                      "The frwkFeedbackTrafficGroup is mandatory if
                      monitoring of traffic data is to be supported."

      GROUP frwkFeedbackTrafficThresGroup
         DESCRIPTION
                      "The frwkFeedbackTrafficThresGroup is mandatory
                      if conditional reporting of traffic usage
                      thresholds is to be supported."

      GROUP frwkFeedbackIfTrafficGroup
         DESCRIPTION
                      "The frwkFeedbackIfTrafficGroup is mandatory if
                      per-interface usage collection of traffic data is
                      to be supported."




Rawlins, et al.              Informational                     [Page 28]


RFC 3571                 Framework Feedback PIB              August 2003


      GROUP frwkFeedbackRoleFilterSelGroup
         DESCRIPTION
                      "The frwkFeedbackRoleFilterSelGroup is mandatory
                      if monitoring of filters referenced through the
                      frwkRoleCombo class is to be supported."

      ::= { frwkFeedbackPibCompliances 1 }

    frwkFeedbackLinkCapsGroup OBJECT-GROUP
        OBJECTS {
                frwkFeedbackLinkCapsId,
                frwkFeedbackLinkCapsSelection,
                frwkFeedbackLinkCapsUsage,
                frwkFeedbackLinkCapsThreshold }
        STATUS  current
        DESCRIPTION
             "Objects from the frwkFeedbackLinkCapsTable."

        ::= { frwkFeedbackPibGroups 1 }

    frwkFeedbackLinkGroup OBJECT-GROUP
        OBJECTS {
                frwkFeedbackLinkId,
                frwkFeedbackLinkSel,
                frwkFeedbackLinkUsage,
                frwkFeedbackLinkInterval,
                frwkFeedbackLinkThreshold,
                frwkFeedbackLinkFlags }
        STATUS  current
        DESCRIPTION
             "Objects from the frwkFeedbackLinkTable."

        ::= { frwkFeedbackPibGroups 2 }

    frwkFeedbackActionGroup OBJECT-GROUP
        OBJECTS {
                frwkFeedbackActionId,
                frwkFeedbackActionIndicator,
                frwkFeedbackActionSpecificPri,
                frwkFeedbackActionList }
        STATUS  current
        DESCRIPTION
             "Objects from the frwkFeedbackActionTable."

        ::= { frwkFeedbackPibGroups 3 }

    frwkFeedbackActionListGroup OBJECT-GROUP
        OBJECTS {



Rawlins, et al.              Informational                     [Page 29]


RFC 3571                 Framework Feedback PIB              August 2003


                frwkFeedbackActionListId,
                frwkFeedbackActionListTag,
                frwkFeedbackActionListRefID }
        STATUS  current
        DESCRIPTION
             "Objects from the frwkFeedbackActionListTable."

        ::= { frwkFeedbackPibGroups 4 }

    frwkFeedbackTrafficGroup OBJECT-GROUP
        OBJECTS {
                frwkFeedbackTrafficId,
                frwkFeedbackTrafficLinkRefID,
                frwkFeedbackTrafficPacketCount,
                frwkFeedbackTrafficByteCount }
        STATUS  current
        DESCRIPTION
             "Objects from the frwkFeedbackTrafficTable."

        ::= { frwkFeedbackPibGroups 5 }

    frwkFeedbackTrafficThresGroup OBJECT-GROUP
        OBJECTS {
                frwkFeedbackTrafficThresId,
                frwkFeedbackTrafficThresPackets,
                frwkFeedbackTrafficThresBytes }
        STATUS  current
        DESCRIPTION
             "Objects from the frwkFeedbackTrafficThresTable."

        ::= { frwkFeedbackPibGroups 6 }

    frwkFeedbackIfTrafficGroup OBJECT-GROUP
        OBJECTS {
                frwkFeedbackIfTrafficId,
                frwkFeedbackIfTrafficLinkRefID,
                frwkFeedbackIfTrafficIfIndex,
                frwkFeedbackIfTrafficPacketCount,
                frwkFeedbackIfTrafficByteCount }
        STATUS  current
        DESCRIPTION
             "Objects from the frwkFeedbackIfTrafficTable."

        ::= { frwkFeedbackPibGroups 7 }

    frwkFeedbackRoleFilterSelGroup OBJECT-GROUP
        OBJECTS {
                frwkFeedbackRoleFilterSelId,



Rawlins, et al.              Informational                     [Page 30]


RFC 3571                 Framework Feedback PIB              August 2003


                frwkFeedbackRoleFilterSelRCombo,
                frwkFeedbackRoleFilterSelFilter }
        STATUS  current
        DESCRIPTION
             "Objects from the frwkFeedbackRoleFilterSelTable."

        ::= { frwkFeedbackPibGroups 8 }

   END

5.  Security Considerations

   This PIB defines structured information that may be sensitive when
   transported by the COPS protocol [COPS-PR].

   This PIB does not contain classes that directly contain security
   relevant information like passwords or monetary amounts.  However,
   unauthorized access or changes to information defined in this PIB
   could compromise network operations or reveal sensitive business or
   personal information.

   Specifically for the classes:

   frwkFeedbackLinkCaps

      This class has the ACCESS clause 'notify'.  Access to this
      information reveals feedback collection capabilities of the COPS
      client and malicious changes could affect feedback operation by
      misleading the server to generate corrupt feedback configuration.

   frwkFeedbackLinkTable, frwkFeedbackAction, frwkFeedbackActionList,
   frwkFeedbackTrafficThres, frwkFeedbackRoleFilterSel

      These classes have the ACCESS clause 'install' and allow the COPS
      server to control feedback collection and reporting on the client.
      Access to this information exposes the client's configuration;
      malicious changes could disrupt network or business operations and
      raise privacy issues.

   frwkFeedbackTraffic, frwkFeedbackIfTraffic

      These classes have the ACCESS clause 'report-only' and contain the
      usage information delivered from the COPS client to the server.
      Unauthorized access to this information may reveal detailed
      information on the network and its users.  Malicious changes may
      affect network and business operations.





Rawlins, et al.              Informational                     [Page 31]


RFC 3571                 Framework Feedback PIB              August 2003


   [COPS] and [COPS-PR] define mechanisms to secure the COPS protocol
   communication and implementations of COPS servers or clients
   supporting this PIB MUST follow the security guidelines specified
   there.

6.  IANA Considerations

   This document describes the frwkFeedbackPib Policy Information Base
   (PIB) module for registration under the "pib" branch registered with
   IANA.  The IANA has assigned PIB number 5.

   This PIB uses "all" in the SUBJECT-CATEGORY clause, so it applies to
   all COPS client types.  No new COPS client type is requested for this
   PIB.

7.  Acknowledgements

   The authors would like to thank Dave Durham, Ravi Sahita, and Russell
   Fenger of Intel and John K. Gallant of WorldCom for their
   contribution to this document.

8.  References

8.1.  Normative References

   [COPS]          Durham, D., Boyle, J., Cohen, R., Herzog, S., Rajan,
                   R. and A. Sastry, "The COPS (Common Open Policy
                   Service) Protocol", RFC 2748, January 2000.

   [COPS-PR]       Chan, K., Seligson, J., Durham, D., Gai, S.,
                   McCloghrie, K., Herzog, S., Reichmeyer, F., Yavatkar,
                   R. and A. Smith, "COPS Usage for Policy
                   Provisioning", RFC 3084, May 2001.

   [IFMIB]         McCloghrie, K. and F. Kastenholz, "The Interfaces
                   Group MIB", RFC 2863, June 2000.

   [FR-PIB]        Sahita, R., Hahn, S., Chan, K. and K. McCloghrie,
                   "Framework Policy Information Base", RFC 3318, March
                   2003.

   [FEEDBACKFWK]   Rawlins, D., Kulkarni, A., Bokaemper, M. and K. Chan,
                   "Framework for Policy Usage Feedback for Common Open
                   Policy Service with Policy Provisioning (COPS-PR)",
                   RFC 3483, March 2003.






Rawlins, et al.              Informational                     [Page 32]


RFC 3571                 Framework Feedback PIB              August 2003


   [RFC2119]       Bradner, S., "Key words for use in RFCs to Indicate
                   Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC2578]       McCloghrie, K., Perkins, D., Schoenwaelder, J., Case,
                   J., Rose, M. and S. Waldbusser, "Structure of
                   Management Information Version 2 (SMIv2)", STD 58,
                   RFC 2578, April 1999.

   [RFC2579]       McCloghrie, K., Perkins, D., Schoenwaelder, J., Case,
                   J., Rose, M. and S. Waldbusser, "Textual Conventions
                   for SMIv2", STD 58, RFC 2579, April 1999.

8.2.  Informational References

   [COPS-TLS],     Walker, J., Kulkarni, A.,"COPS Over TLS", Work in
                   Progress.

   [DIFFSERV-PIB]  Chan, K., Sahita, R., Hahn, S. and K. McCloghrie,
                   "Differentiated Services Quality of Service Policy
                   Information Base", RFC 3317, March 2003.































Rawlins, et al.              Informational                     [Page 33]


RFC 3571                 Framework Feedback PIB              August 2003


9.  Authors' Addresses

   Diana Rawlins
   MCI
   400 International Parkway
   Richardson, Texas 75081

   Phone: 972-729-4071
   EMail: Diana.Rawlins@mci.com

   Amol Kulkarni
   JF3-206
   2111 NE 25th Ave
   Hillsboro, Oregon 97124

   Phone: 503-712-1168
   EMail: amol.kulkarni@intel.com

   Kwok Ho Chan
   Nortel Networks
   600 Technology Park Drive
   Billerica, MA 01821 USA

   Phone: 978-288-8175
   EMail: khchan@nortelnetworks.com

   Martin Bokaemper
   Juniper Networks
   700 Silver Seven Road
   Kanata, ON, K2V 1C3, Canada

   Phone: 613-591-2735
   EMail: mbokaemper@juniper.net

   Dinesh G Dutt
   Cisco Systems, Inc.
   170 Tasman Dr.
   San Jose, CA 95134-1706

   Phone: 408-527-0955
   EMail: ddutt@cisco.com










Rawlins, et al.              Informational                     [Page 34]


RFC 3571                 Framework Feedback PIB              August 2003


10.  Full Copyright Statement

   Copyright (C) The Internet Society (2003).  All Rights Reserved.

   This document and translations of it may be copied and furnished to
   others, and derivative works that comment on or otherwise explain it
   or assist in its implementation may be prepared, copied, published
   and distributed, in whole or in part, without restriction of any
   kind, provided that the above copyright notice and this paragraph are
   included on all such copies and derivative works.  However, this
   document itself may not be modified in any way, such as by removing
   the copyright notice or references to the Internet Society or other
   Internet organizations, except as needed for the purpose of
   developing Internet standards in which case the procedures for
   copyrights defined in the Internet Standards process must be
   followed, or as required to translate it into languages other than
   English.

   The limited permissions granted above are perpetual and will not be
   revoked by the Internet Society or its successors or assignees.

   This document and the information contained herein is provided on an
   "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
   TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
   BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
   HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Acknowledgement

   Funding for the RFC Editor function is currently provided by the
   Internet Society.



















Rawlins, et al.              Informational                     [Page 35]