[RFC Home] [TEXT|PDF|HTML] [Tracker] [IPR] [Errata] [Info page]

PROPOSED STANDARD
Errata Exist
Internet Engineering Task Force (IETF)                          E. Beili
Request for Comments: 6765                              Actelis Networks
Category: Standards Track                                 M. Morgenstern
ISSN: 2070-1721                                              ECI Telecom
                                                           February 2013


                  xDSL Multi-Pair Bonding (G.Bond) MIB

Abstract

   This document defines a Management Information Base (MIB) module for
   use with network management protocols in TCP/IP-based internets.
   This document defines an extension to the Interfaces Group MIB with a
   set of common objects for managing multi-pair bonded Digital
   Subscriber Line (xDSL) interfaces, as defined in ITU-T
   Recommendations G.998.1, G.998.2, and G.998.3.  The textual
   conventions defining the bonding schemes are contained in a separate
   MIB module maintained by Internet Assigned Numbers Authority (IANA).
   The MIB modules specific to each bonding technology are defined in
   G9981-MIB, G9982-MIB, and G9983-MIB, respectively.

Status of This Memo

   This is an Internet Standards Track document.

   This document is a product of the Internet Engineering Task Force
   (IETF).  It represents the consensus of the IETF community.  It has
   received public review and has been approved for publication by the
   Internet Engineering Steering Group (IESG).  Further information on
   Internet Standards is available in Section 2 of RFC 5741.

   Information about the current status of this document, any errata,
   and how to provide feedback on it may be obtained at
   http://www.rfc-editor.org/info/rfc6765.
















Beili & Morgenstern          Standards Track                    [Page 1]


RFC 6765                       G.Bond MIB                  February 2013


Copyright Notice

   Copyright (c) 2013 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1. Introduction ....................................................3
   2. The Internet-Standard Management Framework ......................4
   3. The Broadband Forum Management Framework for xDSL Bonding .......4
   4. Relationship to Other MIB Modules ...............................5
      4.1. Relationship to Interfaces Group MIB Module ................5
           4.1.1. Layering Model ......................................5
           4.1.2. xDSL Bonding ........................................7
           4.1.3. Discovery Operation .................................8
           4.1.4. Initialization of G.Bond Ports .....................10
           4.1.5. Usage of the ifTable ...............................11
      4.2. Relationship to G.Bond ATM, ETH, and TDIM MIB Modules .....13
      4.3. Relationship to xDSL MIB Modules ..........................13
      4.4. Addition of New Bonding Schemes ...........................13
   5. MIB Structure ..................................................13
      5.1. Overview ..................................................13
      5.2. Performance Monitoring ....................................14
      5.3. Mapping of Broadband Forum TR-159 Managed Objects .........14
   6. xDSL Multi-Pair Bonding MIB Definitions ........................19
   7. IANA-Maintained G.Bond TC Definitions ..........................65
   8. Security Considerations ........................................67
   9. IANA Considerations ............................................69
   10. Acknowledgments ...............................................69
   11. References ....................................................70
      11.1. Normative References .....................................70
      11.2. Informative References ...................................71









Beili & Morgenstern          Standards Track                    [Page 2]


RFC 6765                       G.Bond MIB                  February 2013


1.  Introduction

   xDSL Multi-pair bonding allows a service provider to provide high-
   bandwidth services to business and residential customers over
   multiple xDSL lines, with greater speed and resiliency than service
   over a single xDSL line, bridging the gap between xDSL and fiber-
   based transport.

   Currently, there are three xDSL Multi-pair bonding schemes, also
   known under the collective name "G.Bond":

   o  ATM-Based Multi-pair bonding, as specified in ITU-T Recommendation
      G.998.1 [G.998.1], which defines a method for the bonding (or
      aggregating) of multiple xDSL lines (or individual bearer channels
      in multiple xDSL lines) into a single bidirectional logical link
      carrying an ATM stream.  This specification can be viewed as an
      evolution of the legacy Inverse Multiplexing for ATM (IMA)
      technology [AF-PHY-0086], applied to xDSL with variable rates on
      each line/bearer channel.

   o  Ethernet-Based Multi-pair bonding, as specified in ITU-T
      Recommendation G.998.2 [G.998.2], which defines a method for the
      bonding (or aggregating) of multiple xDSL lines (or individual
      bearer channels in multiple xDSL lines) into a single
      bidirectional logical link carrying an Ethernet stream.  This
      specification can be viewed as IEEE 802.3-2005 [802.3] Clause 61,
      Physical Medium Entity (PME) Aggregation, generalized to work over
      any xDSL technology (2Base-TL and 10Pass-TS interfaces defined by
      IEEE use G.SHDSL (Single-pair High-speed DSL) and VDSL (Very high
      speed DSL) technology, respectively).

   o  Multi-pair bonding using Time-Division Inverse Multiplexing
      (TDIM), specified in ITU-T Recommendation G.998.3 [G.998.3], which
      defines a method for the bonding (or aggregating) of multiple xDSL
      lines into a single bidirectional logical link carrying a mix of
      various traffic streams (e.g., Ethernet, ATM, TDM).

   Architecturally, all three bonding schemes define a new "bonded"
   Transport Protocol Specific - Transmission Convergence (TPS-TC)
   sub-layer, stacked above multiple ATM-TC, Ethernet/Packet Transfer
   Mode-TC (PTM-TC), or Synchronous Transfer Mode-TC (STM-TC) (clear
   channel) sub-layers for the ATM, Ethernet, or TDIM bonding,
   respectively.  Each underlying TPS-TC sub-layer represents a
   protocol-specific interface to an xDSL line or an individual bearer
   channel of an xDSL line.  Bonding of multiple bearer channels in the
   same xDSL line is not allowed.





Beili & Morgenstern          Standards Track                    [Page 3]


RFC 6765                       G.Bond MIB                  February 2013


   All schemes allow bonding of up to 32 individual line/channel
   sub-layers with variable rates, providing common functionality for
   the configuration, initialization, operation, and monitoring of the
   bonded link.

   This document defines a MIB module common to all 3 schemes.
   Additional managed objects specific to each bonding technology are
   defined in the G9981-MIB [RFC6768], G9982-MIB [RFC6767], and
   G9983-MIB [RFC6766] modules.

   The textual conventions listing the bonding schemes are defined in a
   separate, IANA-maintained MIB module, the first version of which is
   provided in this document.  This arrangement would allow for future
   bonding schemes to be easily supported, without the need to update
   the common GBOND-MIB module.

2.  The Internet-Standard Management Framework

   For a detailed overview of the documents that describe the current
   Internet-Standard Management Framework, please refer to section 7 of
   RFC 3410 [RFC3410].

   Managed objects are accessed via a virtual information store, termed
   the Management Information Base or MIB.  MIB objects are generally
   accessed through the Simple Network Management Protocol (SNMP).
   Objects in the MIB are defined using the mechanisms defined in the
   Structure of Management Information (SMI).  This document specifies a
   MIB module that is compliant to the SMIv2, which is described in STD
   58, RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC
   2580 [RFC2580].

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in BCP
   14, RFC 2119 [RFC2119].

3.  The Broadband Forum Management Framework for xDSL Bonding

   This document makes use of the Broadband Forum technical report
   "Management Framework for xDSL Bonding" [TR-159], defining a
   management model and a hierarchy of management objects for the bonded
   xDSL interfaces.









Beili & Morgenstern          Standards Track                    [Page 4]


RFC 6765                       G.Bond MIB                  February 2013


4.  Relationship to Other MIB Modules

   This section outlines the relationship of the MIB modules defined in
   this document with other MIB modules described in the relevant RFCs.
   Specifically, the following MIB modules are discussed: the Interfaces
   Group MIB (IF-MIB), Inverse Stack Table MIB (IF-INVERTED-STACK-MIB),
   and Interface Stack Capability MIB (IF-CAP-STACK-MIB); G.Bond scheme-
   specific modules G.Bond/ATM (G9981-MIB), G.Bond/Ethernet (G9982-MIB),
   and G.Bond/TDIM (G9983-MIB); and DSL-specific MIB modules ADSL
   (ADSL-LINE-EXT-MIB), ADSL2 (ADSL2-LINE-MIB), SHDSL
   (HDSL2-SHDSL-LINE-MIB), VDSL (VDSL-LINE-MIB), and VDSL2
   (VDSL2-LINE-MIB).

4.1.  Relationship to Interfaces Group MIB Module

   A bonded xDSL port is a stacked (a.k.a. aggregated or bonded)
   interface and as such is managed using generic interface management
   objects defined in the IF-MIB [RFC2863].

   The stack management, i.e., actual connection of the sub-layers to
   the top layer interface, is done via the ifStackTable, as defined in
   the IF-MIB [RFC2863] and its inverse -- the ifInvStackTable, as
   defined in the IF-INVERTED-STACK-MIB [RFC2864].

   The ifCapStackTable and its inverse -- the ifInvCapStackTable, as
   defined in the IF-CAP-STACK-MIB [RFC5066] -- extend the stack
   management with an ability to describe possible connections or cross-
   connect capability, when a flexible cross-connect matrix is present
   between the interface layers.

4.1.1.  Layering Model

   A G.Bond interface can aggregate up to 32 channel sub-layers, with
   each channel representing an xDSL line or an xDSL bearer channel.
   For the purpose of brevity we will refer to the bonded interface as
   the Generic Bonding Sub-layer (GBS) and to the channel sub-layer as
   the Bonding Channel Entity (BCE).

   A generic G.Bond device can have a number of GBS ports, each
   connected to a particular upper layer (e.g., a Media Access Control
   (MAC) interface for the G.998.2 scheme), while simultaneously cross-
   connected to a number of underlying BCEs, with a single-GBS-per-BCE
   relationship.

   A GBS port is represented in the Interfaces table (ifTable) as a
   separate interface with an ifType reflecting a particular bonding
   scheme, e.g., g9981(263), g9982(264), or g9983(265).




Beili & Morgenstern          Standards Track                    [Page 5]


RFC 6765                       G.Bond MIB                  February 2013


   Each BCE in the aggregated GBS port is represented in the ifTable as
   a separate interface with an ifType relevant to a particular xDSL
   technology, e.g., shdsl(169) or vdsl(97).  The ifType values are
   defined in [IANAifType-MIB].

   The following figure shows the layering diagram and corresponding use
   of the ifTable for the bonded xDSL interfaces:

   .-----------------------------.  -
   |            GBS              |  ^ 1 ifEntry
   |          (TPS-TC)           |  v    ifType: g9981(263), g9982(264),
   +-----------------+---+-------+  -            g9983(265), etc.
   | TPS-TC \        |   |       |  ^
   +---------\       |   |       |  | N ifEntry  (N=1..32)
   | PMS-TC   )BCE 1 |...| BCE N |  )    ifType: adsl(94), shdsl(169),
   +---------/       |   |       |  |            vdsl(97), vdsl2(251),
   | PMD    /        |   |       |  v            etc.
   '-----------------+---+-------'  -

    BCE    - Bonding Channel Entity
    GBS    - Generic Bonding Sub-layer
    PMD    - Physical Medium Dependent
    TPS-TC - Transport Protocol Specific - Transmission Convergence
    PMS-TC - Physical Media Specific - Transmission Convergence

            Figure 1: Use of ifTable for Bonded xDSL Interfaces

   The ifStackTable is indexed by the ifIndex values of the aggregated
   G.Bond port (GBS) and the BCEs connected to it.  The ifStackTable
   allows a network management application to determine which BCEs are
   connected to a particular GBS and change connections (if supported by
   the application).  The ifInvStackTable, being an inverted version of
   the ifStackTable, provides an efficient means for a network
   management application to read a subset of the ifStackTable and
   thereby determine which GBS runs on top of a particular BCE.

   The ifCapStackTable, defined in the IF-CAP-STACK-MIB module,
   specifies for each higher-layer interface (e.g., GBS port) a list of
   lower-layer interfaces (e.g., BCEs), which can possibly be cross-
   connected to that higher-layer interface, determined by the cross-
   connect capability of the device.  This table, modeled after the
   ifStackTable, is read only, reflecting current cross-connect
   capability of a stacked interface, which can be dynamic in some
   implementations (e.g., if xDSL lines are located on a pluggable
   module and the module is pulled out).  Note that BCE availability per
   GBS, described by the ifCapStackTable, can be constrained by other
   parameters -- for example, by the aggregation capacity of a GBS or by
   the BCE in question being already connected to another GBS.  So, in



Beili & Morgenstern          Standards Track                    [Page 6]


RFC 6765                       G.Bond MIB                  February 2013


   order to ensure that a particular BCE can be connected to the GBS,
   all respective parameters (e.g., ifCapStackTable, ifStackTable, and
   gBondPortCapCapacity) SHALL be inspected.

   The ifInvCapStackTable, also defined in the IF-CAP-STACK-MIB module,
   describes which higher-layer interfaces (e.g., GBS ports) can
   possibly be connected to a particular lower-layer interface (e.g.,
   BCE), providing inverted mapping of the ifCapStackTable.  While it
   contains no additional information beyond that already contained in
   the ifCapStackTable, the ifInvCapStackTable has the ifIndex values in
   its INDEX clause in the reverse order, i.e., the lower-layer
   interface first, and the higher-layer interface second, providing
   efficient means for a network management application to read a subset
   of the ifCapStackTable and thereby determine which interfaces can be
   connected to run on top of a particular interface.

4.1.2.  xDSL Bonding

   The G.998.x Bonding allows a number of BCEs to be aggregated onto a
   single logical GBS port by splitting the incoming traffic into
   multiple streams, transmitting each stream over a specific BCE, and
   combining the streams at the remote GBS port, preserving the original
   traffic order.

   The Ethernet frames MAY be fragmented before the transmission and
   reassembled at the remote end to minimize transportation delay.  The
   G.998.2 (G.Bond/Ethernet) ports with multiple BCEs MUST perform the
   fragmentation and reassembly of the Ethernet frames.  However, for
   single-BCE G.998.2 ports this function MAY be omitted (a.k.a. bonding
   bypass), to minimize fragmentation overhead and additional processing
   delay as well as to be able to interoperate with non-G.998 DSL
   equipment.

   The agent is REQUIRED to indicate all supported bonding schemes (for
   example, ATM, Ethernet, and TDIM), including OPTIONAL support for the
   bonding bypass in G.998.2 single-BCE ports.

   The GBOND-MIB module allows a network management application to query
   Bonding capability and enable/disable it if supported.  Note that
   enabling Bonding (by setting the value of the
   gBondPortConfAdminScheme and gBondPortConfPeerAdminScheme objects to
   any supported bonding scheme other than 'none') effectively turns on
   the fragmentation and reassembly function, even on a single-BCE port.








Beili & Morgenstern          Standards Track                    [Page 7]


RFC 6765                       G.Bond MIB                  February 2013


4.1.3.  Discovery Operation

   The G.Bond ports may optionally support a discovery operation whereby
   BCEs, during initialization, exchange information about their
   respective aggregation groups (GBS), via the [G.994.1] handshake
   (G.hs) protocol.  This information can then be used to detect copper
   misconnections or for an automatic assignment of the local BCEs into
   aggregation groups instead of a fixed preconfiguration.

   The MIB module defined in this document allows a network management
   application to control the G.Bond discovery mechanism and query its
   results.

   Two tables are used by the G.Bond discovery mechanism: the
   ifStackTable and the ifCapStackTable.  The following pseudocode gives
   an example of the discovery and automatic BCE assignment for a
   generic multi-GBS G.Bond device, located at the Central Office (CO),
   using objects defined in this MIB module as well as the
   IF-CAP-STACK-MIB and IF-MIB modules [Note that automatic BCE
   assignment is only shown here for the purposes of the example.  Fixed
   BCE pre-assignment, manual assignment, or auto-assignment using an
   alternative internal algorithm may be chosen by a particular
   implementation]:

   // Go over all GBS ports in the CO device
   FOREACH gbs[i] IN CO_device
   { // Perform discovery and auto-assignment on GBS ports
     // with room for more channels.
     IF ( gbs[i].NumBCEs < gbs[i].BondCapacity )
     { // Assign a unique 6-octet local discovery code to the GBS,
       // e.g., MAC address of the associated port or some other
       // unique number specifically allocated for this purpose.
       dc = gbs[i].DiscoveryCode = MAC[i];
       // Go over all disconnected channels, which can
       // potentially be connected to the GBS.
       FOREACH bce[j] IN ifCapStackTable[gbs[i]] AND
                      NOT IN ifStackTable[gbs[i]]  // not connected
       { // Try to grab the Remote Terminal device (RT) by writing the
         // value of the local 6-byte discovery code to the remote
         // discovery code register (via a handshake mechanism).
         // This operation is an atomic Set-if-Clear action; i.e., it
         // would succeed only if the remote discovery register was
         // zero.  Read the remote discovery code register via a Get
         // operation to see if the RT, attached via the BCE,
         // is indeed marked as being the CO_device peer.
         bce[j].RemoteDiscoveryCode = dc;          // Set-if-Clear
         r = bce[j].RemoteDiscoveryCode;           // Get




Beili & Morgenstern          Standards Track                    [Page 8]


RFC 6765                       G.Bond MIB                  February 2013


         IF ( r == dc AND gbs[i].NumBCEs < gbs[i].BondCapacity )
         { // RT connected via BCE[j] is/was a peer
           // for GBS[i], and there is room for another BCE in the
           // GBS[i] aggregation group (max. Bonding capacity is
           // not reached yet).
           // Connect this BCE to the GBS (via the ifStackTable; the
           // ifInvStackTable, which is the inverse of the ifStackTable,
           // is updated automatically; i.e., gbs[i] is auto-added
           // to ifInvStackTable[bce[j]]).
           ADD bce[j] TO ifStackTable[gbs[i]];
           gbs[i].NumBCEs = gbs[i].NumBCEs + 1;
           // Discover all other disconnected BCEs
           // attached to the same RT and connect them to
           // the GBS, provided there is enough room for more BCEs.
           FOREACH bce[k] IN ifCapStackTable[gbs[i]] and
                          NOT IN ifStackTable[gbs[i]]
           { // Get the remote discovery code from the BCE to see if
             // it belongs to a connected RT "grabbed" by
             // the CO_device.
             r = bce[k].RemoteDiscoveryCode;
             IF ( r == dc AND gbs[i].NumBCEs < gbs[i].BondCapacity )
             { // Physically connect the BCE to the GBS.
               // (gbs[i] is auto-added TO ifInvStackTable[bce[k]]).
               ADD bce[k] TO ifStackTable[gbs[i]];
               gbs[i].NumBCEs = gbs[i].NumBCEs + 1;
             }
           }
         }
         // At this point we have discovered all local BCEs that
         // are physically connected to the same RT and
         // connected them to GBS[i].  Go to the next GBS.
         BREAK;
       }
     }
   }

   An SNMP agent for a G.Bond device builds the ifCapStackTable and its
   inverse -- the ifInvCapStackTable -- on device initialization,
   according to the cross-connect capabilities of the device.

   Adding a BCE to the ifStackTable row for a specific GBS involves
   actual connection of the BCE to the GBS.









Beili & Morgenstern          Standards Track                    [Page 9]


RFC 6765                       G.Bond MIB                  February 2013


   Note that a GBS port does not have to be operationally 'down' for the
   connection to succeed.  In fact, a dynamic BCE addition (and removal)
   MAY be implemented with an available BCE being initialized first (by
   setting its ifAdminStatus to 'up') and then added to an operationally
   'up' GBS port, by modifying a respective ifStackTable (and respective
   ifInvStackTable) entry.

   It is RECOMMENDED that removal of the last operationally 'up' BCE
   from an operationally 'up' GBS, i.e., modification of a respective
   entry in the ifStackTable, and a corresponding entry in the
   ifInvStackTable, would be rejected by the implementation (in the case
   of SNMP, with the error inconsistentValue), as this action would
   completely drop the link.

   In addition to the standard handshake-based discovery described
   above, [G.998.2] defines an optional frame-based discovery and pair
   management.  These frame-based methods are discussed in [RFC6767].

4.1.4.  Initialization of G.Bond Ports

   G.Bond ports built on top of xDSL technology require a lengthy
   initialization or 'training' process before any data can pass.
   During this initialization, both ends of a link (peers) work
   cooperatively to achieve a required data rate on a particular copper
   pair.  Sometimes, when the copper line is too long or the noise on
   the line is too high, that 'training' process may fail to achieve a
   specific target rate with required characteristics.

   The ifAdminStatus object from the IF-MIB controls the desired state
   of a GBS with all the BCEs connected to it or of an individual BCE
   port.  Setting this object to 'up' instructs a particular GBS or a
   BCE to start the initialization process, which may take tens of
   seconds for G.Bond ports.  The ifOperStatus object from the IF-MIB
   shows the operational state of an interface for the GBS, extended by
   the gBondPortStatFltStatus object defined in this document, and a
   corresponding *Status object from a relevant xDSL line MIB for BCE
   interfaces.

   A disconnected BCE may be initialized by changing the ifAdminStatus
   from 'down' to 'up'.  Changing the ifAdminStatus to 'up' on the GBS
   initializes all BCEs connected to that particular GBS.  Note that in
   the case of bonding, some interfaces may fail to initialize while
   others succeed.  The GBS is considered operationally 'up' if at least
   one bonded BCE is operationally 'up'.  When all BCEs connected to the
   GBS are 'down', the GBS SHALL be considered operationally
   'lowerLayerDown'.  The GBS SHALL be considered operationally





Beili & Morgenstern          Standards Track                   [Page 10]


RFC 6765                       G.Bond MIB                  February 2013


   'notPresent' if it is not connected to any BCE.  The GBS/BCE
   interface SHALL remain operationally 'down' during initialization,
   indicated by the 'init' value of the gBondPortStatFltStatus object.

4.1.5.  Usage of the ifTable

   Both BCE and GBS interfaces are managed using interface-specific
   management objects defined in the GBOND-MIB module and generic
   interface objects from the ifTable of the IF-MIB, with all management
   table entries referenced by the interface index ifIndex.









































Beili & Morgenstern          Standards Track                   [Page 11]


RFC 6765                       G.Bond MIB                  February 2013


   The following table summarizes G.Bond-specific interpretations for
   some of the ifTable objects specified by the mandatory
   ifGeneralInformationGroup:

   +---------------+---------------------------------------------------+
   | IF-MIB Object | G.Bond Interpretation                             |
   +---------------+---------------------------------------------------+
   | ifIndex       | Interface index.  Note that each BCE and each GBS |
   |               | in the G.Bond PHY MUST have a unique index, as    |
   |               | there are some GBS- and BCE-specific attributes   |
   |               | accessible only on the GBS or BCE level.          |
   +---------------+---------------------------------------------------+
   | ifType        | g9981(263), g9982(264), or g9983(265) for the     |
   |               | ATM, Ethernet, or TDIM GBS, respectively;         |
   |               | shdsl(169) for the G.SHDSL BCE, vdsl(97) for the  |
   |               | VDSL BCE, etc.                                    |
   +---------------+---------------------------------------------------+
   | ifSpeed       | Operating data rate for the BCE.  For the GBS, it |
   |               | is the sum of the current operating data rates of |
   |               | all BCEs in the aggregation group, without the    |
   |               | encapsulation overhead and G.Bond overhead, but   |
   |               | accounting for Inter-Frame Gaps (IFG).  When a    |
   |               | GBS or a BCE is operating in an asymmetrical      |
   |               | fashion (the upstream data rate differs from the  |
   |               | downstream one), the lowest of the values is      |
   |               | shown.                                            |
   +---------------+---------------------------------------------------+
   | ifAdminStatus | Setting this object to 'up' instructs a           |
   |               | particular GBS (with all BCEs connected to it) or |
   |               | a BCE to start the initialization process.        |
   +---------------+---------------------------------------------------+
   | ifOperStatus  | A relevant *Status object from a particular line  |
   |               | MIB supplements the value of ifOperStatus for     |
   |               | BCEs.  gBondPortStatFltStatus supplements the     |
   |               | value of ifOperStatus for a GBS.  Note that both  |
   |               | relevant objects shall be inspected to determine  |
   |               | the real operational status of a BCE/GBS port,    |
   |               | e.g., a GBS port may be operationally 'up' with   |
   |               | gBondPortStatFltStatus indicating lowRate(4)      |
   |               | fault condition, or 'down' with no gBond faults.  |
   +---------------+---------------------------------------------------+

             Table 1: G.Bond Interpretation of IF-MIB Objects








Beili & Morgenstern          Standards Track                   [Page 12]


RFC 6765                       G.Bond MIB                  February 2013


4.2.  Relationship to G.Bond ATM, ETH, and TDIM MIB Modules

   The MIB module defined in this document is common to all G.998
   bonding schemes.  It MUST be used in conjunction with a bonding
   scheme-specific MIB module:

   o  G9981-MIB [RFC6768] for a G.998.1 bonded interface.

   o  G9982-MIB [RFC6767] for a G.998.2 bonded interface.

   o  G9983-MIB [RFC6766] for a G.998.3 bonded interface.

4.3.  Relationship to xDSL MIB Modules

   Each xDSL technology is described in a relevant xDSL line MIB module:
   e.g., the HDSL2-SHDSL-LINE-MIB [RFC4319] for G.SHDSL,
   ADSL-LINE-EXT-MIB [RFC3440] for ADSL, ADSL2-LINE-MIB [RFC4706] for
   ADSL2, VDSL-LINE-MIB [RFC3728] for VDSL, or VDSL2-LINE-MIB [RFC5650]
   for VDSL2.

   These MIB modules are used to manage individual xDSL lines/channels
   (BCEs).

4.4.  Addition of New Bonding Schemes

   In case a new bonding scheme is introduced in a revision of G.998,
   IANA can update the IANA-maintained MIB module, adding the
   corresponding new value to the IANAgBondScheme and
   IANAgBondSchemeList textual conventions, as well as listing the new
   scheme-specific MIB module's name (e.g., G998x-MIB).

   Any scheme-specific aspect of an existing GBOND-MIB object SHALL be
   described in the corresponding G998x-MIB module, to prevent an
   unnecessary reissue of the GBOND-MIB module.  For example, an exact
   definition of an Errored Second (ES) or a Severely Errored Second
   (SES) can be bonding-scheme specific; see the definitions for the
   gBondPortPmCurES and gBondPortPmCurSES objects.

5.  MIB Structure

5.1.  Overview

   The main management objects defined in the GBOND-MIB module are split
   into 2 groups, structured as recommended by RFC 4181 [RFC4181]:

   o  gBondPort - containing objects for configuration, capabilities,
      status, historical Performance Monitoring, and notifications,
      common to all G.Bond ports (GBS).



Beili & Morgenstern          Standards Track                   [Page 13]


RFC 6765                       G.Bond MIB                  February 2013


   o  gBondBce - containing a single common object for configuration of
      the remote discovery code per BCE.  Note that the rest of the
      objects for BCE configuration, capabilities, status, and
      notifications are located in relevant xDSL line MIB modules as
      well as in the bonding scheme-specific MIB modules.

5.2.  Performance Monitoring

   The OPTIONAL Performance Monitoring counters, thresholds, and history
   buckets (interval-counters) defined in [TR-159] are implemented using
   the textual conventions defined in the HC-PerfHist-TC-MIB [RFC3705].
   The HC-PerfHist-TC-MIB defines 64-bit versions of the textual
   conventions found in the PerfHist-TC-MIB [RFC3593].

   The agent SHOULD align the beginning of each interval to a fifteen-
   minute boundary of a wall clock.  Likewise, the beginning of each
   one-day interval SHOULD be aligned with the start of a day.

   The rationale behind this is to simplify collection and analysis of
   Performance Monitoring (PM) from multiple agents by a network
   management system (NMS) -- each PM interval can be "time-stamped"
   using the gBond*IntervalIndex object, from the fact that the 1-day
   interval starts at 00:00 and the 15-minute intervals are aligned with
   each 1/4 hour and the network-wide "wall clock", typically
   distributed via NTP or the Simple Network Time Protocol (SNTP)
   [RFC5905].  If the agent does not have access to the wall clock, a
   local clock can be used.  In this case, as well as when coping with
   multiple time zones, the NMS would have to correlate the difference
   between the agent's local clock (available, for example, via the
   hrSystemDate object from the HOST-RESOURCES-MIB [RFC2790]) and the
   wall clock.

   Counters are not reset when a GBS is re-initialized, but rather only
   when the agent is reset or re-initialized.

   Note that the accumulation of certain performance events for a
   monitored entity is inhibited (counting stops) during periods of
   service unavailability on that monitored entity.  The DESCRIPTION
   clause of Performance Monitoring counters in this MIB module
   specifies which of the counters are inhibited during periods of
   service unavailability.

5.3.  Mapping of Broadband Forum TR-159 Managed Objects

   This section contains the mapping between relevant managed objects
   (attributes) defined in [TR-159] and managed objects defined in this
   document and in associated MIB modules, i.e., the IF-MIB [RFC2863].




Beili & Morgenstern          Standards Track                   [Page 14]


RFC 6765                       G.Bond MIB                  February 2013


 +--------------------------------+------------------------------------+
 | G.Bond Managed Object          | Corresponding SNMP Object          |
 +--------------------------------+------------------------------------+
 | oBondingGroup - Basic Package  |                                    |
 | (Mandatory)                    |                                    |
 +--------------------------------+------------------------------------+
 | aGroupID                       | ifIndex (IF-MIB)                   |
 +--------------------------------+------------------------------------+
 | aGroupBondSchemesSupported     | gBondPortCapSchemesSupported       |
 +--------------------------------+------------------------------------+
 | aGroupPeerBondSchemesSupported | gBondPortCapPeerSchemesSupported   |
 +--------------------------------+------------------------------------+
 | aGroupAdminBondScheme          | gBondPortConfAdminScheme           |
 +--------------------------------+------------------------------------+
 | aGroupPeerAdminBondScheme      | gBondPortConfPeerAdminScheme       |
 +--------------------------------+------------------------------------+
 | aGroupOperBondScheme           | gBondPortStatOperScheme            |
 +--------------------------------+------------------------------------+
 | aGroupPeerOperBondScheme       | gBondPortStatPeerOperScheme        |
 +--------------------------------+------------------------------------+
 | aGroupEnd                      | gBondPortStatSide                  |
 +--------------------------------+------------------------------------+
 | aGroupOperState                | ifOperStatus (IF-MIB)              |
 +--------------------------------+------------------------------------+
 | aGroupAdminState               | ifAdminStatus (IF-MIB)             |
 +--------------------------------+------------------------------------+
 | aGroupStatus                   | gBondPortStatFltStatus             |
 +--------------------------------+------------------------------------+
 | aGroupCapacity                 | gBondPortCapCapacity               |
 +--------------------------------+------------------------------------+
 | aGroupPeerCapacity             | gBondPortCapPeerCapacity           |
 +--------------------------------+------------------------------------+
 | aGroupNumChannels              | gBondPortStatNumBCEs               |
 +--------------------------------+------------------------------------+
 | aGroupName                     | ifName (IF-MIB)                    |
 +--------------------------------+------------------------------------+
 | aGroupDiscoveryCode            | gBondPortConfDiscoveryCode         |
 +--------------------------------+------------------------------------+
 | aGroupUpRate                   | gBondPortStatUpDataRate            |
 +--------------------------------+------------------------------------+
 | aGroupDownRate                 | gBondPortStatDnDataRate            |
 +--------------------------------+------------------------------------+
 | aGroupTargetUpRate             | gBondPortConfTargetUpDataRate      |
 +--------------------------------+------------------------------------+
 | aGroupTargetDownRate           | gBondPortConfTargetDnDataRate      |
 +--------------------------------+------------------------------------+
 | aGroupThreshLowUpRate          | gBondPortConfThreshLowUpRate       |
 +--------------------------------+------------------------------------+



Beili & Morgenstern          Standards Track                   [Page 15]


RFC 6765                       G.Bond MIB                  February 2013


 +--------------------------------+------------------------------------+
 | aGroupThreshLowDownRate        | gBondPortConfThreshLowDnRate       |
 +--------------------------------+------------------------------------+
 | aGroupLowRateCrossingEnable    | gBondPortConfLowRateCrossingEnable |
 +--------------------------------+------------------------------------+
 | nGroupLowUpRateCrossing        | gBondLowUpRateCrossing             |
 +--------------------------------+------------------------------------+
 | nGroupLowDownRateCrossing      | gBondLowDnRateCrossing             |
 +--------------------------------+------------------------------------+
 | aGroupLinkUpDownEnable         | ifLinkUpDownTrapEnable (IF-MIB)    |
 +--------------------------------+------------------------------------+
 | nGroupLinkUp                   | linkUp (IF-MIB)                    |
 +--------------------------------+------------------------------------+
 | nGroupLinkDown                 | linkDown (IF-MIB)                  |
 +--------------------------------+------------------------------------+
 | oBondingGroup - PM Package     |                                    |
 | (Optional)                     |                                    |
 +--------------------------------+------------------------------------+
 | aGroupPerfES                   | gBondPortPmCurES                   |
 +--------------------------------+------------------------------------+
 | aGroupPerfSES                  | gBondPortPmCurSES                  |
 +--------------------------------+------------------------------------+
 | aGroupPerfUAS                  | gBondPortPmCurUAS                  |
 +--------------------------------+------------------------------------+
 | aGroupPerf15MinValidIntervals  | gBondPortPmCur15MinValidIntervals  |
 +--------------------------------+------------------------------------+
 | aGroupPerf15MinInvalidIntervals| gBondPortPmCur15MinInvalidIntervals|
 +--------------------------------+------------------------------------+
 | aGroupPerfCurr15MinTimeElapsed | gBondPortPmCur15MinTimeElapsed     |
 +--------------------------------+------------------------------------+
 | aGroupPerfCurr15MinES          | gBondPortPmCur15MinES              |
 +--------------------------------+------------------------------------+
 | aGroupPerfCurr15MinSES         | gBondPortPmCur15MinSES             |
 +--------------------------------+------------------------------------+
 | aGroupPerfCurr15MinUAS         | gBondPortPmCur15MinUAS             |
 +--------------------------------+------------------------------------+
 | aGroupPerfTcaEnable            | gBondPortConfPmTcaEnable           |
 +--------------------------------+------------------------------------+
 | aGroupPerfThreshold15MinES     | gBondPortPmTcaProfileThresh15MinES |
 +--------------------------------+------------------------------------+
 | aGroupPerfThreshold15MinSES    | gBondPortPmTcaProfileThresh15MinSES|
 +--------------------------------+------------------------------------+
 | aGroupPerfThreshold15MinUAS    | gBondPortPmTcaProfileThresh15MinUAS|
 +--------------------------------+------------------------------------+
 | nGroupPerfTca15MinES           | gBondPmTca15MinESCrossing          |
 +--------------------------------+------------------------------------+
 | nGroupPerfTca15MinSES          | gBondPmTca15MinSESCrossing         |
 +--------------------------------+------------------------------------+



Beili & Morgenstern          Standards Track                   [Page 16]


RFC 6765                       G.Bond MIB                  February 2013


 +--------------------------------+------------------------------------+
 | nGroupPerfTca15MinUAS          | gBondPmTca15MinUASCrossing         |
 +--------------------------------+------------------------------------+
 | aGroupPerf1DayValidIntervals   | gBondPortPmCur1DayValidIntervals   |
 +--------------------------------+------------------------------------+
 | aGroupPerf1DayInvalidIntervals | gBondPortPmCur1DayInvalidIntervals |
 +--------------------------------+------------------------------------+
 | aGroupPerfCurr1DayTimeElapsed  | gBondPortPmCur1DayTimeElapsed      |
 +--------------------------------+------------------------------------+
 | aGroupPerfCurr1DayES           | gBondPortPmCur1DayIntervalES       |
 +--------------------------------+------------------------------------+
 | aGroupPerfCurr1DaySES          | gBondPortPmCur1DayIntervalSES      |
 +--------------------------------+------------------------------------+
 | aGroupPerfCurr1DayUAS          | gBondPortPmCur1DayIntervalUAS      |
 +--------------------------------+------------------------------------+
 | aGroupPerfThreshold1DayES      | gBondPortPmTcaProfileThresh1DayES  |
 +--------------------------------+------------------------------------+
 | aGroupPerfThreshold1DaySES     | gBondPortPmTcaProfileThresh1DaySES |
 +--------------------------------+------------------------------------+
 | aGroupPerfThreshold1DayUAS     | gBondPortPmTcaProfileThresh1DayUAS |
 +--------------------------------+------------------------------------+
 | nGroupPerfTca1DayES            | gBondPmTca1DayESCrossing           |
 +--------------------------------+------------------------------------+
 | nGroupPerfTca1DaySES           | gBondPmTca1DaySESCrossing          |
 +--------------------------------+------------------------------------+
 | nGroupPerfTca1DayUAS           | gBondPmTca1DayUASCrossing          |
 +--------------------------------+------------------------------------+
 | aGroupPerf15MinIntervalNumber  | gBondPortPm15MinIntervalIndex      |
 +--------------------------------+------------------------------------+
 | aGroupPerf15MinIntervalValid   | gBondPortPm15MinIntervalValid      |
 +--------------------------------+------------------------------------+
 | aGroupPerf15MinIntervalES      | gBondPortPm15MinIntervalES         |
 +--------------------------------+------------------------------------+
 | aGroupPerf15MinIntervalSES     | gBondPortPm15MinIntervalSES        |
 +--------------------------------+------------------------------------+
 | aGroupPerf15MinIntervalUAS     | gBondPortPm15MinIntervalUAS        |
 +--------------------------------+------------------------------------+
 | aGroupPerf1DayIntervalNumber   | gBondPortPm1DayIntervalIndex       |
 +--------------------------------+------------------------------------+
 | aGroupPerf1DayIntervalValid    | gBondPortPm1DayIntervalValid       |
 +--------------------------------+------------------------------------+
 | aGroupPerf1DayIntervalMoniSecs | gBondPortPm1DayIntervalMoniTime    |
 +--------------------------------+------------------------------------+
 | aGroupPerf1DayIntervalES       | gBondPortPm1DayIntervalES          |
 +--------------------------------+------------------------------------+
 | aGroupPerf1DayIntervalSES      | gBondPortPm1DayIntervalSES         |
 +--------------------------------+------------------------------------+




Beili & Morgenstern          Standards Track                   [Page 17]


RFC 6765                       G.Bond MIB                  February 2013


 +--------------------------------+------------------------------------+
 | aGroupPerf1DayIntervalUAS      | gBondPortPm1DayIntervalUAS         |
 +--------------------------------+------------------------------------+
 | oLine - Basic Package          |                                    |
 | (Mandatory)                    |                                    |
 +--------------------------------+------------------------------------+
 | aLineID                        | ifIndex (IF-MIB)                   |
 +--------------------------------+------------------------------------+
 | aLineType                      | ifType (IF-MIB)                    |
 +--------------------------------+------------------------------------+
 | aLineOperState                 | ifOperStatus (IF-MIB)              |
 +--------------------------------+------------------------------------+
 | aLineStatus                    | *dsl*CurrStatus (*DSL-LINE-MIB)    |
 +--------------------------------+------------------------------------+
 | aLineEnd                       | *dsl*Side (*DSL-LINE-MIB)          |
 +--------------------------------+------------------------------------+
 | aLineAdminState                | ifAdminStatus (IF-MIB)             |
 +--------------------------------+------------------------------------+
 | aLineRemoteDiscoveryCode       | gBondBceConfRemoteDiscoveryCode    |
 +--------------------------------+------------------------------------+
 | aLineUpDownEnable              | ifLinkUpDownTrapEnable (IF-MIB)    |
 +--------------------------------+------------------------------------+
 | nLineUp                        | LinkUp (IF-MIB)                    |
 +--------------------------------+------------------------------------+
 | nLineDown                      | LinkDown (IF-MIB)                  |
 +--------------------------------+------------------------------------+
 | oChannel - Basic Package       |                                    |
 | (Mandatory)                    |                                    |
 +--------------------------------+------------------------------------+
 | aChannelID                     | ifIndex (IF-MIB)                   |
 +--------------------------------+------------------------------------+
 | aChannelGroupID                |                                    |
 +--------------------------------+------------------------------------+
 | aChannelType                   | ifType (IF-MIB)                    |
 +--------------------------------+------------------------------------+
 | aChannelOperState              | ifOperStatus (IF-MIB)              |
 +--------------------------------+------------------------------------+
 | aChannelStatus                 | *dsl*CurrStatus (*DSL-LINE-MIB),   |
 |                                | xdsl2ChStatus*Status               |
 |                                | (VDSL2-LINE-MIB)                   |
 +--------------------------------+------------------------------------+

                 Table 2: Mapping of TR-159 Managed Objects








Beili & Morgenstern          Standards Track                   [Page 18]


RFC 6765                       G.Bond MIB                  February 2013


6.  xDSL Multi-Pair Bonding MIB Definitions

   The GBOND-MIB module IMPORTS objects from SNMPv2-SMI [RFC2578],
   SNMPv2-TC [RFC2579], SNMPv2-CONF [RFC2580], SNMP-FRAMEWORK-MIB
   [RFC3411], IF-MIB [RFC2863], and HC-PerfHist-TC-MIB [RFC3705].
   The module has been structured as recommended by [RFC4181].

GBOND-MIB DEFINITIONS ::= BEGIN

  IMPORTS
    MODULE-IDENTITY,
    OBJECT-TYPE,
    NOTIFICATION-TYPE,
    mib-2,
    Unsigned32,
    Gauge32
      FROM SNMPv2-SMI           -- RFC 2578
    TEXTUAL-CONVENTION,
    TruthValue,
    RowStatus,
    PhysAddress
      FROM SNMPv2-TC            -- RFC 2579
    MODULE-COMPLIANCE,
    OBJECT-GROUP,
    NOTIFICATION-GROUP
      FROM SNMPv2-CONF          -- RFC 2580
    SnmpAdminString
      FROM SNMP-FRAMEWORK-MIB   -- RFC 3411
    ifIndex
      FROM IF-MIB               -- RFC 2863
    HCPerfCurrentCount,
    HCPerfIntervalCount,
    HCPerfIntervalThreshold,
    HCPerfValidIntervals,
    HCPerfInvalidIntervals,
    HCPerfTimeElapsed,
    HCPerfTotalCount
      FROM  HC-PerfHist-TC-MIB  -- RFC 3705
    IANAgBondScheme,
    IANAgBondSchemeList
      FROM  IANA-GBOND-TC-MIB
    ;
------------------------------------------------------------------------








Beili & Morgenstern          Standards Track                   [Page 19]


RFC 6765                       G.Bond MIB                  February 2013


  gBondMIB MODULE-IDENTITY
    LAST-UPDATED "201302200000Z"  -- 20 February 2013
    ORGANIZATION "IETF ADSL MIB Working Group"
    CONTACT-INFO
      "WG charter:
        http://datatracker.ietf.org/wg/adslmib/charter/

      Mailing Lists:
        General Discussion: adslmib@ietf.org
        To Subscribe: adslmib-request@ietf.org
        In Body: subscribe your_email_address

       Chair: Menachem Dodge
      Postal: ECI Telecom, Ltd.
              30 Hasivim St.
              Petach-Tikva  4951169
              Israel
       Phone: +972-3-926-8421
       EMail: menachemdodge1@gmail.com

      Editor: Edward Beili
      Postal: Actelis Networks, Inc.
              25 Bazel St., P.O.B. 10173
              Petach-Tikva  49103
              Israel
       Phone: +972-3-924-3491
       EMail: edward.beili@actelis.com

      Editor: Moti Morgenstern
      Postal: ECI Telecom
              30 Hasivim St.
              Petach-Tikva  4951169
              Israel
       Phone: +972-3-926-6258
       EMail: moti.morgenstern@ecitele.com"

    DESCRIPTION
      "The objects in this MIB module are used to manage the
      multi-pair bonded xDSL interfaces, as defined in ITU-T
      Recommendations G.998.1, G.998.2, and G.998.3.

      This MIB module MUST be used in conjunction with a bonding
      scheme-specific MIB module, that is, G9981-MIB, G9982-MIB,
      or G9983-MIB.







Beili & Morgenstern          Standards Track                   [Page 20]


RFC 6765                       G.Bond MIB                  February 2013


      The following references are used throughout this MIB module:

      [G.998.1] refers to:
        ITU-T Recommendation G.998.1: 'ATM-based multi-pair bonding',
        January 2005.

      [G.998.2] refers to:
        ITU-T Recommendation G.998.2: 'Ethernet-based multi-pair
        bonding', January 2005.

      [G.998.3] refers to:
        ITU-T Recommendation G.998.3: 'Multi-pair bonding using
        time-division inverse multiplexing', January 2005.

      [TR-159] refers to:
        Broadband Forum Technical Report: 'Management Framework for
        xDSL Bonding', December 2008.

      Naming Conventions:
        BCE   - Bonding Channel Entity
        BTU   - Bonding Terminating Unit
        BTU-C - Bonding Terminating Unit, CO side
        BTU-R - Bonding Terminating Unit, Remote Terminal (CPE) side
        CO    - Central Office
        CPE   - Customer Premises Equipment
        GBS   - Generic Bonding Sub-layer
        PM    - Performance Monitoring
        SNR   - Signal to Noise Ratio
        TCA   - Threshold Crossing Alert

     Copyright (c) 2013 IETF Trust and the persons identified as
     authors of the code.  All rights reserved.

     Redistribution and use in source and binary forms, with or without
     modification, is permitted pursuant to, and subject to the license
     terms contained in, the Simplified BSD License set forth in Section
     4.c of the IETF Trust's Legal Provisions Relating to IETF Documents
     (http://trustee.ietf.org/license-info)."

    REVISION    "201302200000Z"  -- 20 February 2013
    DESCRIPTION "Initial version, published as RFC 6765."

    ::= { mib-2 211 }

   -- Sections of the module
   -- Structured as recommended by RFC 4181, Appendix D





Beili & Morgenstern          Standards Track                   [Page 21]


RFC 6765                       G.Bond MIB                  February 2013


   gBondObjects     OBJECT IDENTIFIER ::= { gBondMIB 1 }

   gBondConformance OBJECT IDENTIFIER ::= { gBondMIB 2 }

   -- Groups in the module

   gBondPort        OBJECT IDENTIFIER ::= { gBondObjects 1 }

   gBondBce         OBJECT IDENTIFIER ::= { gBondObjects 2 }

   -- Textual Conventions

   GBondPm1DayIntervalThreshold ::= TEXTUAL-CONVENTION
     DISPLAY-HINT "d"
     STATUS      current
     DESCRIPTION
       "This textual convention defines a range of values that may be
       set in a fault threshold alarm control for a 1-day Performance
       Monitoring interval.
       As the number of seconds in a 1-day interval numbers at most
       86400, objects of this type may have a range of 0...86400,
       where the value of 0 disables the alarm."
     SYNTAX      Unsigned32 (0..86400)


   -- Port Notifications group

   gBondPortNotifications OBJECT IDENTIFIER ::= { gBondPort 0 }

   gBondLowUpRateCrossing NOTIFICATION-TYPE
     OBJECTS {
       -- ifIndex is not needed here, since we are under specific GBS
       gBondPortStatUpDataRate,
       gBondPortConfThreshLowUpRate
     }
     STATUS      current
     DESCRIPTION
       "This notification indicates that the G.Bond port's upstream
       data rate has reached/dropped below or exceeded the low
       upstream rate threshold, specified by
       gBondPortConfThreshLowUpRate.

       This notification MAY be sent for the -O subtype ports
       while the port is 'up', on the crossing event in both
       directions: from normal (rate is above the threshold) to low
       (rate equals the threshold or is below it) and from low to
       normal.  This notification is not applicable to the -R
       subtypes.



Beili & Morgenstern          Standards Track                   [Page 22]


RFC 6765                       G.Bond MIB                  February 2013


       It is RECOMMENDED that a small debouncing period of 2.5 sec,
       between the detection of the condition and notification,
       be implemented to prevent simultaneous LinkUp/LinkDown and
       gBondLowUpRateCrossing notifications from being sent.

       The adaptive nature of the G.Bond technology allows the port
       to adapt itself to the changes in the copper environment;
       e.g., an impulse noise, alien crosstalk, or a
       micro-interruption may temporarily drop one or more BCEs in
       the aggregation group, causing a rate degradation of the
       aggregated G.Bond link.  The dropped BCEs would then try to
       re-initialize, possibly at a lower rate than before, adjusting
       the rate to provide the required target SNR margin.

       Generation of this notification is controlled by the
       gBondPortConfLowRateCrossingEnable object.

       This object maps to the TR-159 notification
       nGroupLowUpRateCrossing."
     REFERENCE
       "[TR-159], Section 5.5.1.24"
     ::= { gBondPortNotifications 1 }

   gBondLowDnRateCrossing NOTIFICATION-TYPE
     OBJECTS {
       -- ifIndex is not needed here, since we are under specific GBS
       gBondPortStatDnDataRate,
       gBondPortConfThreshLowDnRate
     }
     STATUS      current
     DESCRIPTION
       "This notification indicates that the G.Bond port's downstream
       data rate has reached/dropped below or exceeded the low
       downstream rate threshold, specified by
       gBondPortConfThreshLowDnRate.

       This notification MAY be sent for the -O subtype ports
       while the port is 'up', on the crossing event in both
       directions: from normal (rate is above the threshold) to low
       (rate equals the threshold or is below it) and from low to
       normal.  This notification is not applicable to the -R
       subtypes.

       It is RECOMMENDED that a small debouncing period of 2.5 sec,
       between the detection of the condition and notification,
       be implemented to prevent simultaneous LinkUp/LinkDown and
       gBondLowDnRateCrossing notifications from being sent.




Beili & Morgenstern          Standards Track                   [Page 23]


RFC 6765                       G.Bond MIB                  February 2013


       The adaptive nature of the G.Bond technology allows the port
       to adapt itself to the changes in the copper environment;
       e.g., an impulse noise, alien crosstalk, or a
       micro-interruption may temporarily drop one or more BCEs in
       the aggregation group, causing a rate degradation of the
       aggregated G.Bond link.  The dropped BCEs would then try to
       re-initialize, possibly at a lower rate than before,
       adjusting the rate to provide the required target SNR margin.

       Generation of this notification is controlled by the
       gBondPortConfLowRateCrossingEnable object.

       This object maps to the TR-159 notification
       nGroupLowDownRateCrossing."
     REFERENCE
       "[TR-159], Section 5.5.1.25"
     ::= { gBondPortNotifications 2}

   gBondPmTca15MinESCrossing NOTIFICATION-TYPE
     OBJECTS {
       -- ifIndex is not needed here, since we are under specific GBS
       gBondPortPmCur15MinES,
       gBondPortPmTcaProfileThresh15MinES
     }
     STATUS      current
     DESCRIPTION
       "This notification indicates that the Errored Seconds threshold,
       specified by gBondPortPmTcaProfileThresh15MinES, has been
       reached or exceeded for the GBS port.

       Generation of this notification is controlled by the
       gBondPortConfPmTcaEnable and
       gBondPortPmTcaProfileThresh15MinES objects.

       This object maps to the TR-159 notification
       nGroupPerfTca15MinES."
     REFERENCE
       "[TR-159], Section 5.5.1.42"
     ::= { gBondPortNotifications 3}

   gBondPmTca15MinSESCrossing NOTIFICATION-TYPE
     OBJECTS {
       -- ifIndex is not needed here, since we are under specific GBS
       gBondPortPmCur15MinSES,
       gBondPortPmTcaProfileThresh15MinSES
     }
     STATUS      current




Beili & Morgenstern          Standards Track                   [Page 24]


RFC 6765                       G.Bond MIB                  February 2013


     DESCRIPTION
       "This notification indicates that the Severely Errored Seconds
       threshold, specified by gBondPortPmTcaProfileThresh15MinSES,
       has been reached or exceeded for the GBS port.

       Generation of this notification is controlled by the
       gBondPortConfPmTcaEnable and
       gBondPortPmTcaProfileThresh15MinSES objects.

       This object maps to the TR-159 notification
       nGroupPerfTca15MinSES."
     REFERENCE
       "[TR-159], Section 5.5.1.43"
     ::= { gBondPortNotifications 4}

   gBondPmTca15MinUASCrossing NOTIFICATION-TYPE
     OBJECTS {
       -- ifIndex is not needed here, since we are under specific GBS
       gBondPortPmCur15MinUAS,
       gBondPortPmTcaProfileThresh15MinUAS
     }
     STATUS      current
     DESCRIPTION
       "This notification indicates that the Unavailable Seconds
       threshold, specified by gBondPortPmTcaProfileThresh15MinUAS,
       has been reached or exceeded for the GBS port.

       Generation of this notification is controlled by the
       gBondPortConfPmTcaEnable and
       gBondPortPmTcaProfileThresh15MinUAS objects.

       This object maps to the TR-159 notification
       nGroupPerfTca15MinUAS."
     REFERENCE
       "[TR-159], Section 5.5.1.44"
     ::= { gBondPortNotifications 5}

   gBondPmTca1DayESCrossing NOTIFICATION-TYPE
     OBJECTS {
       -- ifIndex is not needed here, since we are under specific GBS
       gBondPortPmCur1DayES,
       gBondPortPmTcaProfileThresh1DayES
     }
     STATUS      current
     DESCRIPTION
       "This notification indicates that the Errored Seconds threshold,
       specified by gBondPortPmTcaProfileThresh1DayES, has been
       reached or exceeded for the GBS port.



Beili & Morgenstern          Standards Track                   [Page 25]


RFC 6765                       G.Bond MIB                  February 2013


       Generation of this notification is controlled by the
       gBondPortConfPmTcaEnable and
       gBondPortPmTcaProfileThresh1DayES objects.

       This object maps to the TR-159 notification
       nGroupPerfTca1DayES."
     REFERENCE
       "[TR-159], Section 5.5.1.54"
     ::= { gBondPortNotifications 6}

   gBondPmTca1DaySESCrossing NOTIFICATION-TYPE
     OBJECTS {
       -- ifIndex is not needed here, since we are under specific GBS
       gBondPortPmCur1DaySES,
       gBondPortPmTcaProfileThresh1DaySES
     }
     STATUS      current
     DESCRIPTION
       "This notification indicates that the Severely Errored Seconds
       threshold, specified by gBondPortPmTcaProfileThresh1DaySES,
       has been reached or exceeded for the GBS port.

       Generation of this notification is controlled by the
       gBondPortConfPmTcaEnable and
       gBondPortPmTcaProfileThresh1DaySES objects.

       This object maps to the TR-159 notification
       nGroupPerfTca1DaySES."
     REFERENCE
       "[TR-159], Section 5.5.1.55"
     ::= { gBondPortNotifications 7}

   gBondPmTca1DayUASCrossing NOTIFICATION-TYPE
     OBJECTS {
       -- ifIndex is not needed here, since we are under specific GBS
       gBondPortPmCur1DayUAS,
       gBondPortPmTcaProfileThresh1DayUAS
     }
     STATUS      current
     DESCRIPTION
       "This notification indicates that the Unavailable Seconds
       threshold, specified by gBondPortPmTcaProfileThresh1DayUAS,
       has been reached or exceeded for the GBS port.

       Generation of this notification is controlled by the
       gBondPortConfPmTcaEnable and
       gBondPortPmTcaProfileThresh1DayUAS objects.




Beili & Morgenstern          Standards Track                   [Page 26]


RFC 6765                       G.Bond MIB                  February 2013


       This object maps to the TR-159 notification
       nGroupPerfTca1DayUAS."
     REFERENCE
       "[TR-159], Section 5.5.1.56"
     ::= { gBondPortNotifications 8}

   -- G.Bond Port (GBS) group

   gBondPortConfTable OBJECT-TYPE
     SYNTAX      SEQUENCE OF GBondPortConfEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
       "Table for configuration of G.Bond GBS ports.  Entries in this
       table MUST be maintained in a persistent manner."
     ::= { gBondPort 1 }

   gBondPortConfEntry OBJECT-TYPE
     SYNTAX      GBondPortConfEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
       "An entry in the G.Bond Port Configuration table.
       Each entry represents a G.Bond port indexed by the ifIndex.
       Note that a G.Bond GBS port runs on top of a single
       or multiple BCE port(s), which are also indexed by the ifIndex."
     INDEX  { ifIndex }
     ::= { gBondPortConfTable 1 }

   GBondPortConfEntry ::=
     SEQUENCE {
       gBondPortConfAdminScheme              IANAgBondScheme,
       gBondPortConfPeerAdminScheme          IANAgBondScheme,
       gBondPortConfDiscoveryCode            PhysAddress,
       gBondPortConfTargetUpDataRate         Unsigned32,
       gBondPortConfTargetDnDataRate         Unsigned32,
       gBondPortConfThreshLowUpRate          Unsigned32,
       gBondPortConfThreshLowDnRate          Unsigned32,
       gBondPortConfLowRateCrossingEnable    TruthValue,
       gBondPortConfPmTcaConfProfile         SnmpAdminString,
       gBondPortConfPmTcaEnable              TruthValue
     }

   gBondPortConfAdminScheme  OBJECT-TYPE
     SYNTAX      IANAgBondScheme
     MAX-ACCESS  read-write
     STATUS      current




Beili & Morgenstern          Standards Track                   [Page 27]


RFC 6765                       G.Bond MIB                  February 2013


     DESCRIPTION
       "A desired bonding scheme for a G.Bond GBS port.
       The following values instruct the port to use the corresponding
       bonding scheme if supported:
         none(0)       - instructs the port not to use bonding
                         (only on a single-BCE G.998.2 GBS)
         g9981(1)      - instructs the port to use G.998.1 bonding
         g9982(2)      - instructs the port to use G.998.2 bonding
         g9983(3)      - instructs the port to use G.998.3 bonding

       Changing of the gBondPortConfAdminScheme object MUST be
       performed when the link is administratively 'down', as indicated
       by the ifAdminStatus object in the IF-MIB.
       Attempts to change this object MUST be rejected (in the case of
       SNMP, with the error inconsistentValue), if the link is 'up' or
       initializing.  Attempts to change this object to an unsupported
       bonding scheme (see gBondPortCapSchemesSupported) SHALL be
       rejected (in the case of SNMP, with the error wrongValue).
       Setting this object to the value of 'none' must be rejected for
       GBS ports with multiple BCEs (with the error inconsistentValue).

       This object maps to the TR-159 attribute aGroupAdminBondScheme."
     REFERENCE
       "[TR-159], Section 5.5.1.6; RFC 2863, IF-MIB, ifAdminStatus"
     ::= { gBondPortConfEntry 1 }

   gBondPortConfPeerAdminScheme  OBJECT-TYPE
     SYNTAX      IANAgBondScheme
     MAX-ACCESS  read-write
     STATUS      current
     DESCRIPTION
       "A desired bonding scheme for a peer (link partner) G.Bond
       port (GBS).
       The following values instruct the peer port to use the
       corresponding bonding scheme if supported:
         none(0)       - instructs the port not to use bonding
                         (only on a single-BCE G.998.2 GBS)
         g9981(1)      - instructs the port to use G.998.1 bonding
         g9982(2)      - instructs the port to use G.998.2 bonding
         g9983(3)      - instructs the port to use G.998.3 bonding

       Changing of this object MUST be performed when the link is
       administratively 'down', as indicated by the ifAdminStatus
       object in the IF-MIB.
       Attempts to change this object MUST be rejected (in the case of
       SNMP, with the error inconsistentValue), if the link is 'up' or
       initializing.  Attempts to change this object to an unsupported
       bonding scheme (see gBondPortCapPeerSchemesSupported) SHALL be



Beili & Morgenstern          Standards Track                   [Page 28]


RFC 6765                       G.Bond MIB                  February 2013


       rejected (in the case of SNMP, with the error wrongValue).
       Setting this object to the value of 'none' must be rejected for
       GBS ports with multiple BCEs (with the error inconsistentValue).

       This object maps to the TR-159 attribute
       aGroupPeerAdminBondScheme."
     REFERENCE
       "[TR-159], Section 5.5.1.7; RFC 2863, IF-MIB, ifAdminStatus"
     ::= { gBondPortConfEntry 2 }

   gBondPortConfDiscoveryCode  OBJECT-TYPE
     SYNTAX      PhysAddress (SIZE (6))
     MAX-ACCESS  read-write
     STATUS      current
     DESCRIPTION
       "A discovery code of the G.Bond port (GBS).
       A unique 6-octet-long code used by the Discovery function.
       This object MUST be instantiated for the -O subtype GBS before
       write operations on the gBondBceConfRemoteDiscoveryCode
       (Set_if_Clear and Clear_if_Same) are performed by BCEs
       associated with the GBS.
       The initial value of this object for -R subtype ports after
       reset is all zeroes.  For -R subtype ports, the value of this
       object cannot be changed directly.  This value may be changed
       as a result of a write operation on the
       gBondBceConfRemoteDiscoveryCode object of a remote BCE of -O
       subtype, connected to one of the local BCEs associated with
       the GBS.

       Discovery MUST be performed when the link is administratively
       'down', as indicated by the ifAdminStatus object in the IF-MIB.
       Attempts to change this object MUST be rejected (in the case of
       SNMP, with the error inconsistentValue), if the link is 'up' or
       initializing.

       This object maps to the TR-159 attribute
       aGroupDiscoveryCode."
     REFERENCE
       "[TR-159], Section 5.5.1.20; [802.3], Sections 61.2.2.8.3,
       61.2.2.8.4, 45.2.6.6.1, 45.2.6.8, 61A.2;
       RFC 2863, IF-MIB, ifAdminStatus"
     ::= { gBondPortConfEntry 3 }

   gBondPortConfTargetUpDataRate  OBJECT-TYPE
     SYNTAX      Unsigned32 (0|1..10000000)
     UNITS       "Kbps"
     MAX-ACCESS  read-write
     STATUS      current



Beili & Morgenstern          Standards Track                   [Page 29]


RFC 6765                       G.Bond MIB                  February 2013


     DESCRIPTION
       "A desired G.Bond port data rate in the upstream direction,
       in Kbps, to be achieved during initialization, under
       restrictions placed upon the member BCEs by their respective
       configuration settings.
       This object represents a sum of individual BCE upstream data
       rates, modified to compensate for fragmentation and
       encapsulation overhead (e.g., for an Ethernet service, the
       target data rate of 10 Mbps SHALL allow lossless transmission
       of full-duplex 10-Mbps Ethernet frame stream with minimal
       inter-frame gap).
       Note that the target upstream data rate may not be achieved
       during initialization (e.g., due to unavailability of required
       BCEs) or the initial bandwidth could deteriorate, so that the
       actual upstream data rate (gBondPortStatUpDataRate) could be less
       than gBondPortConfTargetUpDataRate.

       The value is limited above by 10 Gbps, to accommodate very
       high speed bonded xDSL interfaces (e.g., 32 x 100 Mbps).

       The value between 1 and 10000000 indicates that the total
       upstream data rate of the G.Bond port after initialization
       SHALL be equal to the target data rate or less, if the target
       upstream data rate cannot be achieved under the restrictions
       configured for BCEs.  In cases where the copper environment
       allows a higher upstream data rate to be achieved than that
       specified by this object, the excess capability SHALL be
       either converted to an additional SNR margin or reclaimed by
       minimizing transmit power.

       The value of 0 means that the target data rate is not
       fixed and SHALL be set to the maximum attainable rate during
       initialization (best effort), under specified spectral
       restrictions and with a desired SNR margin per BCE.

       This object is read-write for the -O subtype G.Bond ports.
       It is irrelevant for the -R subtypes -- attempts to read or
       change this object for such ports MUST be rejected (in the case
       of SNMP, with the error inconsistentValue).

       Changing of the target upstream data rate MUST be performed
       when the link is administratively 'down', as indicated by the
       ifAdminStatus object in the IF-MIB.
       Attempts to change this object MUST be rejected (in the case of
       SNMP, with the error inconsistentValue), if the link is 'up' or
       initializing.

       This object maps to the TR-159 attribute aGroupTargetUpRate."



Beili & Morgenstern          Standards Track                   [Page 30]


RFC 6765                       G.Bond MIB                  February 2013


     REFERENCE
       "[TR-159], Section 5.5.1.17; RFC 2863, IF-MIB, ifAdminStatus"
     ::= { gBondPortConfEntry 4 }

   gBondPortConfTargetDnDataRate  OBJECT-TYPE
     SYNTAX      Unsigned32 (0|1..10000000)
     UNITS       "Kbps"
     MAX-ACCESS  read-write
     STATUS      current
     DESCRIPTION
       "A desired G.Bond port data rate in the downstream direction,
       in Kbps, to be achieved during initialization, under
       restrictions placed upon the member BCEs by their respective
       configuration settings.
       This object represents a sum of individual BCE downstream data
       rates, modified to compensate for fragmentation and
       encapsulation overhead (e.g., for an Ethernet service, the
       target data rate of 10 Mbps SHALL allow lossless transmission
       of full-duplex 10-Mbps Ethernet frame stream with minimal
       inter-frame gap).
       Note that the target downstream data rate may not be achieved
       during initialization (e.g., due to unavailability of required
       BCEs) or the initial bandwidth could deteriorate, so that the
       actual downstream data rate (gBondPortStatDnDataRate) could be
       less than gBondPortConfTargetDnDataRate.

       The value is limited above by 10 Gbps, to accommodate very
       high speed bonded xDSL interfaces (e.g., 32 x 100 Mbps).

       The value between 1 and 10000000 indicates that the total
       downstream data rate of the G.Bond port after initialization
       SHALL be equal to the target data rate or less, if the target
       downstream data rate cannot be achieved under the restrictions
       configured for BCEs.  In cases where the copper environment
       allows a higher downstream data rate to be achieved than that
       specified by this object, the excess capability SHALL be
       either converted to an additional SNR margin or reclaimed by
       minimizing transmit power.

       The value of 0 means that the target data rate is not
       fixed and SHALL be set to the maximum attainable rate during
       initialization (best effort), under specified spectral
       restrictions and with a desired SNR margin per BCE.

       This object is read-write for the -O subtype G.Bond ports.
       It is irrelevant for the -R subtypes -- attempts to read or
       change this object for such ports MUST be rejected (in the case
       of SNMP, with the error inconsistentValue).



Beili & Morgenstern          Standards Track                   [Page 31]


RFC 6765                       G.Bond MIB                  February 2013


       Changing of the target downstream data rate MUST be performed
       when the link is administratively 'down', as indicated by the
       ifAdminStatus object in the IF-MIB.
       Attempts to change this object MUST be rejected (in the case of
       SNMP, with the error inconsistentValue), if the link is 'up' or
       initializing.

       This object maps to the TR-159 attribute aGroupTargetDownRate."
     REFERENCE
       "[TR-159], Section 5.5.1.18; RFC 2863, IF-MIB, ifAdminStatus"
     ::= { gBondPortConfEntry 5 }

   gBondPortConfThreshLowUpRate  OBJECT-TYPE
     SYNTAX      Unsigned32 (1..10000000)
     UNITS       "Kbps"
     MAX-ACCESS  read-write
     STATUS      current
     DESCRIPTION
       "This object configures the G.Bond port low upstream rate
       crossing alarm threshold.  When the current value of
       gBondPortStatUpDataRate for this port reaches/drops below or
       exceeds this threshold, a gBondLowUpRateCrossing notification
       MAY be generated if enabled by
       gBondPortConfLowRateCrossingEnable.

       This object is read-write for the -O subtype G.Bond ports.
       It is irrelevant for the -R subtypes -- attempts to read or
       change this object for such ports MUST be rejected (in the case
       of SNMP, with the error inconsistentValue).

       This object maps to the TR-159 attribute
       aGroupthreshLowUpRate."
     REFERENCE
       "[TR-159], Section 5.5.1.21"
     ::= { gBondPortConfEntry 6 }

   gBondPortConfThreshLowDnRate  OBJECT-TYPE
     SYNTAX      Unsigned32 (1..10000000)
     UNITS       "Kbps"
     MAX-ACCESS  read-write
     STATUS      current
     DESCRIPTION
       "This object configures the G.Bond port low downstream rate
       crossing alarm threshold.  When the current value of
       gBondPortStatDnDataRate for this port reaches/drops below or
       exceeds this threshold, a gBondLowDnRateCrossing notification
       MAY be generated if enabled by
       gBondPortConfLowRateCrossingEnable.



Beili & Morgenstern          Standards Track                   [Page 32]


RFC 6765                       G.Bond MIB                  February 2013


       This object is read-write for the -O subtype G.Bond ports.
       It is irrelevant for the -R subtypes -- attempts to read or
       change this object for such ports MUST be rejected (in the case
       of SNMP, with the error inconsistentValue).

       This object maps to the TR-159 attribute
       aGroupThreshLowDownRate."
     REFERENCE
       "[TR-159], Section 5.5.1.22"
     ::= { gBondPortConfEntry 7 }

   gBondPortConfLowRateCrossingEnable  OBJECT-TYPE
     SYNTAX      TruthValue
     MAX-ACCESS  read-write
     STATUS      current
     DESCRIPTION
       "Indicates whether gBondLowUpRateCrossing and
       gBondLowDnRateCrossing notifications should be generated
       for this interface.

       A value of true(1) indicates that the notifications are
       enabled.  A value of false(2) indicates that the notifications
       are disabled.

       This object is read-write for the -O subtype G.Bond ports.
       It is irrelevant for the -R subtypes -- attempts to read or
       change this object for such ports MUST be rejected (in the case
       of SNMP, with the error inconsistentValue).

       This object maps to the TR-159 attribute
       aGroupLowRateCrossingEnable."
     REFERENCE
       "[TR-159], Section 5.5.1.23"
     ::= { gBondPortConfEntry 8 }

   gBondPortConfPmTcaConfProfile  OBJECT-TYPE
     SYNTAX      SnmpAdminString (SIZE (1..32))
     MAX-ACCESS  read-write
     STATUS      current
     DESCRIPTION
       "The value of this object is the index of the row in the GBS
       Port Alarm Configuration Profile table for Performance Monitoring
       Threshold Crossing Alerts -- the gBondPortAlarmConfProfileTable,
       which applies to this GBS port."
     DEFVAL  { "DEFVAL" }
     ::= { gBondPortConfEntry 9 }





Beili & Morgenstern          Standards Track                   [Page 33]


RFC 6765                       G.Bond MIB                  February 2013


   gBondPortConfPmTcaEnable  OBJECT-TYPE
     SYNTAX      TruthValue
     MAX-ACCESS  read-write
     STATUS      current
     DESCRIPTION
       "Indicates whether the gBondPerfTca*Crossing set of
       notifications should be generated for this interface.

       A value of true(1) indicates that the notifications are
       enabled.  A value of false(2) indicates that the notifications
       are disabled.

       This object maps to the TR-159 attribute aGroupPerfTcaEnable."
     REFERENCE
       "[TR-159], Section 5.5.1.38"
     ::= { gBondPortConfEntry 10 }


   gBondPortCapTable OBJECT-TYPE
     SYNTAX      SEQUENCE OF GBondPortCapEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
       "Table for capabilities of G.Bond ports.  Entries in this table
       MUST be maintained in a persistent manner."
     ::= { gBondPort 2 }

   gBondPortCapEntry OBJECT-TYPE
     SYNTAX      GBondPortCapEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
       "An entry in the G.Bond Port Capability table.
       Each entry represents a G.Bond port indexed by the ifIndex.
       Note that a G.Bond GBS port runs on top of a single
       or multiple BCE port(s), which are also indexed by the ifIndex."
     INDEX  { ifIndex }
     ::= { gBondPortCapTable 1 }

   GBondPortCapEntry ::=
     SEQUENCE {
       gBondPortCapSchemesSupported          IANAgBondSchemeList,
       gBondPortCapPeerSchemesSupported      IANAgBondSchemeList,
       gBondPortCapCapacity                  Unsigned32,
       gBondPortCapPeerCapacity              Unsigned32
     }





Beili & Morgenstern          Standards Track                   [Page 34]


RFC 6765                       G.Bond MIB                  February 2013


   gBondPortCapSchemesSupported          OBJECT-TYPE
     SYNTAX      IANAgBondSchemeList
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
       "Bonding capability of the G.Bond port (GBS).  This is a
       read-only bitmap of the possible bonding schemes supported by
       the GBS.  The various bit positions are:
         none(0)       - GBS is capable of bonding bypass on a
                         single-BCE G.998.2 GBS
         g9981(1)      - GBS is capable of G.998.1 bonding
         g9982(2)      - GBS is capable of G.998.2 bonding
         g9983(3)      - GBS is capable of G.998.3 bonding

       Note that for ports supporting multiple bonding schemes, the
       actual administrative scheme is set via gBondPortConfAdminScheme
       object.  The current operating bonding scheme is reflected in
       the gBondPortStatOperScheme object.

       This object maps to the TR-159 attribute
       aGroupBondSchemesSupported."
     REFERENCE
       "[TR-159], Section 5.5.1.2"
     ::= { gBondPortCapEntry 1 }

   gBondPortCapPeerSchemesSupported  OBJECT-TYPE
     SYNTAX      IANAgBondSchemeList
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
       "Bonding capability of the peer G.Bond port (GBS).  This is a
       read-only bitmap of the possible bonding schemes supported by
       the link partner GBS.  The various bit positions are:
         none(0)       - peer GBS does not support bonding, or
                         the peer unit could not be reached, or
                         peer GBS is capable of bonding bypass on a
                         single-BCE G.998.2 GBS
         g9981(1)      - peer GBS is capable of G.998.1 bonding
         g9982(2)      - peer GBS is capable of G.998.2 bonding
         g9983(3)      - peer GBS is capable of G.998.3 bonding

       Note that for ports supporting multiple bonding schemes, the
       actual administrative scheme is set via the
       gBondPortConfPeerAdminScheme object.  The current operating
       bonding scheme is reflected in the gBondPortStatPeerOperScheme
       object.





Beili & Morgenstern          Standards Track                   [Page 35]


RFC 6765                       G.Bond MIB                  February 2013


       This object maps to the TR-159 attribute
       aGroupPeerBondSchemesSupported."
     REFERENCE
       "[TR-159], Section 5.5.1.3"
     ::= { gBondPortCapEntry 2 }

   gBondPortCapCapacity  OBJECT-TYPE
     SYNTAX      Unsigned32 (1..32)
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
       "Number of BCEs that can be aggregated by the local GBS.
       The number of BCEs currently assigned to a particular G.Bond
       port (gBondPortStatNumBCEs) is never greater than
       gBondPortCapCapacity.

       This object maps to the TR-159 attribute aGroupCapacity."
     REFERENCE
       "[TR-159], Section 5.5.1.12"
     ::= { gBondPortCapEntry 3 }

   gBondPortCapPeerCapacity  OBJECT-TYPE
     SYNTAX      Unsigned32 (0|1..32)
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
       "Number of BCEs that can be aggregated by the peer GBS port.
       A value of 0 is returned when peer Bonding capacity is unknown
       (peer cannot be reached).

       This object maps to the TR-159 attribute aGroupPeerCapacity."
     REFERENCE
       "[TR-159], Section 5.5.1.13"
     ::= { gBondPortCapEntry 4 }


   gBondPortStatTable OBJECT-TYPE
     SYNTAX      SEQUENCE OF GBondPortStatEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
       "This table provides overall status information of G.Bond
       ports, complementing the generic status information from the
       ifTable of the IF-MIB.  Additional status information about
       connected BCEs is available from the relevant line MIBs.

       This table contains live data from the equipment.  As such,
       it is NOT persistent."



Beili & Morgenstern          Standards Track                   [Page 36]


RFC 6765                       G.Bond MIB                  February 2013


     ::= { gBondPort 3 }

   gBondPortStatEntry OBJECT-TYPE
     SYNTAX      GBondPortStatEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
       "An entry in the G.Bond Port Status table.
       Each entry represents a G.Bond port indexed by the ifIndex.
       Note that a G.Bond GBS port runs on top of a single
       or multiple BCE port(s), which are also indexed by the ifIndex."
     INDEX  { ifIndex }
     ::= { gBondPortStatTable 1 }

   GBondPortStatEntry ::=
     SEQUENCE {
       gBondPortStatOperScheme               IANAgBondScheme,
       gBondPortStatPeerOperScheme           IANAgBondScheme,
       gBondPortStatUpDataRate               Gauge32,
       gBondPortStatDnDataRate               Gauge32,
       gBondPortStatFltStatus                BITS,
       gBondPortStatSide                     INTEGER,
       gBondPortStatNumBCEs                  Unsigned32
     }

   gBondPortStatOperScheme  OBJECT-TYPE
     SYNTAX      IANAgBondScheme
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
       "Current operating bonding scheme of a G.Bond port.
       The possible values are:
         none(0)       - bonding bypass on a single-BCE G.998.2 GBS
         g9981(1)      - G.998.1 bonding
         g9982(2)      - G.998.2 bonding
         g9983(3)      - G.998.3 bonding

       This object maps to the TR-159 attribute
       aGroupOperBondScheme."
     REFERENCE
       "[TR-159], Section 5.5.1.4"
     ::= { gBondPortStatEntry 1 }

   gBondPortStatPeerOperScheme  OBJECT-TYPE
     SYNTAX      IANAgBondScheme
     MAX-ACCESS  read-only
     STATUS      current




Beili & Morgenstern          Standards Track                   [Page 37]


RFC 6765                       G.Bond MIB                  February 2013


     DESCRIPTION
       "Current operating bonding scheme of a G.Bond port link partner.
       The possible values are:
         unknown(0)    - peer cannot be reached due to the link state or
                         bonding bypass on a single-BCE G.998.2 GBS
         g9981(1)      - G.998.1 bonding
         g9982(2)      - G.998.2 bonding
         g9983(3)      - G.998.3 bonding

       This object maps to the TR-159 attribute
       aGroupPeerOperBondScheme."
     REFERENCE
       "[TR-159], Section 5.5.1.5"
     ::= { gBondPortStatEntry 2 }

   gBondPortStatUpDataRate  OBJECT-TYPE
     SYNTAX      Gauge32
     UNITS       "bps"
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
       "A current G.Bond port operational data rate in the upstream
       direction, in bps.
       This object represents an estimation of the sum of individual
       BCE upstream data rates, modified to compensate for
       fragmentation and encapsulation overhead (e.g., for an
       Ethernet service, the target data rate of 10 Mbps SHALL allow
       lossless transmission of full-duplex 10-Mbps Ethernet frame
       stream with minimal inter-frame gap).

       Note that for symmetrical interfaces, gBondPortStatUpDataRate ==
       gBondPortStatDnDataRate == ifSpeed.

       This object maps to the TR-159 attribute aGroupUpRate."
     REFERENCE
       "[TR-159], Section 5.5.1.15"
     ::= { gBondPortStatEntry 3 }

   gBondPortStatDnDataRate  OBJECT-TYPE
     SYNTAX      Gauge32
     UNITS       "bps"
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
       "A current G.Bond port operational data rate in the downstream
       direction, in bps.
       This object represents an estimation of the sum of individual
       BCE downstream data rates, modified to compensate for



Beili & Morgenstern          Standards Track                   [Page 38]


RFC 6765                       G.Bond MIB                  February 2013


       fragmentation and encapsulation overhead (e.g., for an
       Ethernet service, the target data rate of 10 Mbps SHALL allow
       lossless transmission of full-duplex 10-Mbps Ethernet frame
       stream with minimal inter-frame gap).

       Note that for symmetrical interfaces, gBondPortStatUpDataRate ==
       gBondPortStatDnDataRate == ifSpeed.

       This object maps to the TR-159 attribute aGroupDownRate."
     REFERENCE
       "[TR-159], Section 5.5.1.16"
     ::= { gBondPortStatEntry 4 }


   gBondPortStatFltStatus  OBJECT-TYPE
     SYNTAX      BITS {
       noPeer(0),
       peerPowerLoss(1),
       peerBondSchemeMismatch(2),
       bceSubTypeMismatch(3),
       lowRate(4),
       init(5),
       ready(6)
     }
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
       "G.Bond (GBS) port fault status.  This is a bitmap of possible
       conditions.  The various bit positions are:
         noPeer                 - Peer GBS cannot be reached (e.g.,
                                  no BCEs attached, all BCEs are
                                  'down', etc.).
         peerPowerLoss          - Peer GBS has indicated impending unit
                                  failure due to loss of local power
                                  ('Dying Gasp').
         peerBondSchemeMismatch - Operating bonding scheme of a peer
                                  GBS is different from the local one.
         bceSubTypeMismatch     - Local BCEs in the aggregation group
                                  are not of the same sub-type, e.g.,
                                  some BCEs in the local device are -O
                                  while others are -R subtype.
         lowRate                - gBondUpRate/gBondDnRate of the port
                                  has reached or dropped below
                                  gBondPortConfThreshLowUpRate/
                                  gBondPortConfThreshLowDnRate.






Beili & Morgenstern          Standards Track                   [Page 39]


RFC 6765                       G.Bond MIB                  February 2013


         init                   - The link is initializing, as a result
                                  of ifAdminStatus being set to 'up'
                                  for a particular BCE or a GBS
                                  to which the BCE is connected.
         ready                  - At least one BCE in the aggregation
                                  group is detecting handshake tones.

       This object is intended to supplement the ifOperStatus object
       in the IF-MIB.

       This object maps to the TR-159 attribute aGroupStatus."
     REFERENCE
       "[TR-159], Section 5.5.1.9; RFC 2863, IF-MIB, ifOperStatus"
     ::= { gBondPortStatEntry 5 }

   gBondPortStatSide  OBJECT-TYPE
     SYNTAX      INTEGER {
       subscriber(1),
       office(2),
       unknown(3)
     }
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
       "G.Bond port mode of operation (subtype).
       The value of 'subscriber' indicates that the port is
       designated as '-R' subtype (all BCEs assigned to this port are of
       subtype '-R').
       The value of 'office' indicates that the port is designated
       as '-O' subtype (all BCEs assigned to this port are of
       subtype '-O').
       The value of 'unknown' indicates that the port has no assigned
       BCEs yet or that the assigned BCEs are not of the same side
       (subTypeBCEMismatch).

       This object maps to the TR-159 attribute aGroupEnd."
     REFERENCE
       "[TR-159], Section 5.5.1.11"
     ::= { gBondPortStatEntry 6 }

   gBondPortStatNumBCEs  OBJECT-TYPE
     SYNTAX      Unsigned32 (0..32)
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
       "Number of BCEs that are currently aggregated by the local GBS
       (assigned to the G.Bond port using the ifStackTable).
       This number is never greater than gBondPortCapCapacity.



Beili & Morgenstern          Standards Track                   [Page 40]


RFC 6765                       G.Bond MIB                  February 2013


       This object SHALL be automatically incremented or decremented
       when a BCE is added or deleted to/from the G.Bond port using
       the ifStackTable.

       This object maps to the TR-159 attribute aGroupNumChannels."
     REFERENCE
       "[TR-159], Section 5.5.1.14"
     ::= { gBondPortStatEntry 7 }


   -- Performance Monitoring group

   gBondPortPM   OBJECT IDENTIFIER ::= { gBondPort 4 }

   gBondPortPmCurTable OBJECT-TYPE
     SYNTAX      SEQUENCE OF GBondPortPmCurEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
       "This table contains current Performance Monitoring (PM)
       information for a GBS port.  This table contains live data from
       the equipment and as such is NOT persistent."
     ::= { gBondPortPM 1 }

   gBondPortPmCurEntry OBJECT-TYPE
     SYNTAX      GBondPortPmCurEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
       "An entry in the G.Bond Port PM table.
       Each entry represents a G.Bond port indexed by the ifIndex.
       Note that a G.Bond GBS port runs on top of a single
       or multiple BCE port(s), which are also indexed by the ifIndex."
     INDEX  { ifIndex }
     ::= { gBondPortPmCurTable 1 }

   GBondPortPmCurEntry ::=
     SEQUENCE {
       gBondPortPmCurES                      HCPerfTotalCount,
       gBondPortPmCurSES                     HCPerfTotalCount,
       gBondPortPmCurUAS                     HCPerfTotalCount,
       gBondPortPmCur15MinValidIntervals     HCPerfValidIntervals,
       gBondPortPmCur15MinInvalidIntervals   HCPerfInvalidIntervals,
       gBondPortPmCur15MinTimeElapsed        HCPerfTimeElapsed,
       gBondPortPmCur15MinES                 HCPerfCurrentCount,
       gBondPortPmCur15MinSES                HCPerfCurrentCount,
       gBondPortPmCur15MinUAS                HCPerfCurrentCount,
       gBondPortPmCur1DayValidIntervals      Unsigned32,



Beili & Morgenstern          Standards Track                   [Page 41]


RFC 6765                       G.Bond MIB                  February 2013


       gBondPortPmCur1DayInvalidIntervals    Unsigned32,
       gBondPortPmCur1DayTimeElapsed         HCPerfTimeElapsed,
       gBondPortPmCur1DayES                  HCPerfCurrentCount,
       gBondPortPmCur1DaySES                 HCPerfCurrentCount,
       gBondPortPmCur1DayUAS                 HCPerfCurrentCount
     }

   gBondPortPmCurES  OBJECT-TYPE
     SYNTAX      HCPerfTotalCount
     UNITS       "seconds"
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
       "A count of Errored Seconds (ES) on the GBS since the BTU was
       last restarted.

       An Errored Second for a G.998.x interface is defined as a count
       of 1-second intervals during which one or more GBS errors are
       declared.  The errors are specific for each bonding scheme, e.g.,
         - lost cells for the ATM bonding
         - lost or discarded (due to an error or a buffer overflow)
           fragments for the Ethernet bonding
         - CRC-4, CRC-6, or CRC-8 errors for the TDIM bonding
       This object is inhibited during Unavailable Seconds (UAS).

       This object maps to the TR-159 attribute aGroupPerfES."
     REFERENCE
       "[TR-159], Section 5.5.1.29"
     ::= { gBondPortPmCurEntry 1 }

   gBondPortPmCurSES  OBJECT-TYPE
     SYNTAX      HCPerfTotalCount
     UNITS       "seconds"
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
       "A count of Severely Errored Seconds (SES) on the GBS
       since the BTU was last restarted.

       A Severely Errored Second for a G.998.x interface is defined as
       a count of 1-second intervals during which GBS errors cause at
       least 1% traffic loss of the nominal bonded link rate or at
       least 12 ms for the TDM traffic.  The exact definition is
       specific for each bonding scheme, e.g.,
         - 234 lost cells for the ATM bonding with 10-Mbps nominal link
           rate





Beili & Morgenstern          Standards Track                   [Page 42]


RFC 6765                       G.Bond MIB                  February 2013


         - 60 lost/discarded fragments for the Ethernet bonding with
           10-Mbps nominal link rate and fixed 192-byte-long fragment
           size
         - 6 or more CRC-4 errors, one or more CRC-6 errors, or one or
           more CRC-8 errors for the TDM bonding
       This object is inhibited during Unavailable Seconds (UAS).

       This object maps to the TR-159 attribute aGroupPerfSES."
     REFERENCE
       "[TR-159], Section 5.5.1.30"
     ::= { gBondPortPmCurEntry 2 }

   gBondPortPmCurUAS  OBJECT-TYPE
     SYNTAX      HCPerfTotalCount
     UNITS       "seconds"
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
       "A count of Unavailable Seconds (UAS) on the GBS since the BTU
       was last restarted.

       An Unavailable Second for a G.998.x interface is defined as a
       count of 1-second intervals during which the bonded link is
       unavailable.  The G.998.x link becomes unavailable at the onset
       of 10 contiguous SESs.  The 10 SESs are included in the
       unavailable time.  Once unavailable, the G.998.x line becomes
       available at the onset of 10 contiguous seconds with no SESs.
       The 10 seconds with no SESs are excluded from the unavailable
       time.

       This object maps to the TR-159 attribute aGroupPerfUAS."
     REFERENCE
       "[TR-159], Section 5.5.1.31"
     ::= { gBondPortPmCurEntry 3 }

   gBondPortPmCur15MinValidIntervals  OBJECT-TYPE
     SYNTAX      HCPerfValidIntervals
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
       "A number of 15-minute intervals for which data was collected.
       The value of this object will be 96 or the maximum number of
       15-minute history intervals collected by the implementation,
       unless the measurement was (re)started recently, in which case
       the value will be the number of complete 15-minute intervals
       for which there are at least some data.





Beili & Morgenstern          Standards Track                   [Page 43]


RFC 6765                       G.Bond MIB                  February 2013


       In certain cases, it is possible that some intervals are
       unavailable.  In this case, this object reports the maximum
       interval number for which data is available.

       This object maps to the TR-159 attribute
       aGroupPerf15MinValidIntervals."
     REFERENCE
       "[TR-159], Section 5.5.1.32"
     ::= { gBondPortPmCurEntry 4 }

   gBondPortPmCur15MinInvalidIntervals  OBJECT-TYPE
     SYNTAX      HCPerfInvalidIntervals
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
       "A number of 15-minute intervals for which data was not always
       available.  The value will typically be zero, except in cases
       where the data for some intervals are not available.

       This object maps to the TR-159 attribute
       aGroupPerf15MinInvalidIntervals."
     REFERENCE
       "[TR-159], Section 5.5.1.33"
     ::= { gBondPortPmCurEntry 5 }

   gBondPortPmCur15MinTimeElapsed  OBJECT-TYPE
     SYNTAX      HCPerfTimeElapsed
     UNITS       "seconds"
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
       "A count of seconds that have elapsed since the beginning of the
       current 15-minute performance interval.

       This object maps to the TR-159 attribute
       aGroupPerfCurr15MinTimeElapsed."
     REFERENCE
       "[TR-159], Section 5.5.1.34"
     ::= { gBondPortPmCurEntry 6 }

   gBondPortPmCur15MinES  OBJECT-TYPE
     SYNTAX      HCPerfCurrentCount
     UNITS       "seconds"
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
       "A count of Errored Seconds (ES) on the GBS in the current
       15-minute performance interval.



Beili & Morgenstern          Standards Track                   [Page 44]


RFC 6765                       G.Bond MIB                  February 2013


       This object maps to the TR-159 attribute aGroupPerfCurr15MinES."
     REFERENCE
       "[TR-159], Section 5.5.1.35"
     ::= { gBondPortPmCurEntry 7 }

   gBondPortPmCur15MinSES  OBJECT-TYPE
     SYNTAX      HCPerfCurrentCount
     UNITS       "seconds"
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
       "A count of Severely Errored Seconds (SES) on the GBS in the
       current 15-minute performance interval.

       This object maps to the TR-159 attribute aGroupPerfCurr15MinSES."
     REFERENCE
       "[TR-159], Section 5.5.1.36"
     ::= { gBondPortPmCurEntry 8 }

   gBondPortPmCur15MinUAS  OBJECT-TYPE
     SYNTAX      HCPerfCurrentCount
     UNITS       "seconds"
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
       "A count of Unavailable Seconds (UAS) on the GBS in the current
       15-minute performance interval.

       This object maps to the TR-159 attribute aGroupPerfCurr15MinUAS."
     REFERENCE
       "[TR-159], Section 5.5.1.37"
     ::= { gBondPortPmCurEntry 9 }

   gBondPortPmCur1DayValidIntervals  OBJECT-TYPE
     SYNTAX      Unsigned32 (0..7)
     UNITS       "days"
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
       "A number of 1-day intervals for which data was collected.
       The value of this object will be 7 or the maximum number of
       1-day history intervals collected by the implementation, unless
       the measurement was (re)started recently, in which case the
       value will be the number of complete 1-day intervals for which
       there are at least some data.
       In certain cases, it is possible that some intervals are
       unavailable.  In this case, this object reports the maximum
       interval number for which data is available.



Beili & Morgenstern          Standards Track                   [Page 45]


RFC 6765                       G.Bond MIB                  February 2013


       This object maps to the TR-159 attribute
       aGroupPerf1DayValidIntervals."
     REFERENCE
       "[TR-159], Section 5.5.1.45"
     ::= { gBondPortPmCurEntry 10 }

   gBondPortPmCur1DayInvalidIntervals  OBJECT-TYPE
     SYNTAX      Unsigned32 (0..7)
     UNITS       "days"
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
       "A number of 1-day intervals for which data was not always
       available.  The value will typically be zero, except in cases
       where the data for some intervals are not available.

       This object maps to the TR-159 attribute
       aGroupPerf1DayInvalidIntervals."
     REFERENCE
       "[TR-159], Section 5.5.1.46"
     ::= { gBondPortPmCurEntry 11 }

   gBondPortPmCur1DayTimeElapsed  OBJECT-TYPE
     SYNTAX      HCPerfTimeElapsed
     UNITS       "seconds"
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
       "A count of seconds that have elapsed since the beginning of
       the current 1-day performance interval.

       This object maps to the TR-159 attribute
       aGroupPerfCurr1DayTimeElapsed."
     REFERENCE
       "[TR-159], Section 5.5.1.47"
     ::= { gBondPortPmCurEntry 12 }

   gBondPortPmCur1DayES  OBJECT-TYPE
     SYNTAX      HCPerfCurrentCount
     UNITS       "seconds"
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
       "A count of Errored Seconds (ES) on the GBS in the current 1-day
       performance interval.

       This object maps to the TR-159 attribute aGroupPerfCurr1DayES."




Beili & Morgenstern          Standards Track                   [Page 46]


RFC 6765                       G.Bond MIB                  February 2013


     REFERENCE
       "[TR-159], Section 5.5.1.48"
     ::= { gBondPortPmCurEntry 13 }

   gBondPortPmCur1DaySES  OBJECT-TYPE
     SYNTAX      HCPerfCurrentCount
     UNITS       "seconds"
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
       "A count of Severely Errored Seconds (SES) on the GBS in the
       current 1-day performance interval.

       This object maps to the TR-159 attribute aGroupPerfCurr1DaySES."
     REFERENCE
       "[TR-159], Section 5.5.1.49"
     ::= { gBondPortPmCurEntry 14 }

   gBondPortPmCur1DayUAS  OBJECT-TYPE
     SYNTAX      HCPerfCurrentCount
     UNITS       "seconds"
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
       "A count of Unavailable Seconds (UAS) on the GBS in the current
       1-day performance interval.

       This object maps to the TR-159 attribute aGroupPerfCurr1DayUAS."
     REFERENCE
       "[TR-159], Section 5.5.1.50"
     ::= { gBondPortPmCurEntry 15 }

   -- PM history: 15-min buckets

   gBondPortPm15MinTable OBJECT-TYPE
     SYNTAX      SEQUENCE OF GBondPortPm15MinEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
       "This table contains historical 15-minute buckets of Performance
       Monitoring information for a GBS port (a row for each 15-minute
       interval, up to 96 intervals).
       Entries in this table MUST be maintained in a persistent manner."
     ::= { gBondPortPM 2 }

   gBondPortPm15MinEntry OBJECT-TYPE
     SYNTAX      GBondPortPm15MinEntry
     MAX-ACCESS  not-accessible



Beili & Morgenstern          Standards Track                   [Page 47]


RFC 6765                       G.Bond MIB                  February 2013


     STATUS      current
     DESCRIPTION
       "An entry in the G.Bond Port historical 15-minute PM table.
       Each entry represents Performance Monitoring data for a GBS port,
       indexed by the ifIndex, collected during a particular 15-minute
       interval, indexed by the gBondPortPm15MinIntervalIndex."
     INDEX  { ifIndex, gBondPortPm15MinIntervalIndex }
     ::= { gBondPortPm15MinTable 1 }

   GBondPortPm15MinEntry ::=
     SEQUENCE {
       gBondPortPm15MinIntervalIndex         Unsigned32,
       gBondPortPm15MinIntervalMoniTime      HCPerfTimeElapsed,
       gBondPortPm15MinIntervalES            HCPerfIntervalCount,
       gBondPortPm15MinIntervalSES           HCPerfIntervalCount,
       gBondPortPm15MinIntervalUAS           HCPerfIntervalCount,
       gBondPortPm15MinIntervalValid         TruthValue
     }

   gBondPortPm15MinIntervalIndex  OBJECT-TYPE
     SYNTAX      Unsigned32 (1..96)
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
       "Performance data interval number.  1 is the most recent
       previous interval; interval 96 is 24 hours ago.
       Intervals 2..96 are OPTIONAL.

       This object maps to the TR-159 attribute
       aGroupPerf15MinIntervalNumber."
     REFERENCE
       "[TR-159], Section 5.5.1.57"
     ::= { gBondPortPm15MinEntry 1 }

   gBondPortPm15MinIntervalMoniTime  OBJECT-TYPE
     SYNTAX      HCPerfTimeElapsed
     UNITS       "seconds"
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
       "A count of seconds over which the performance data was actually
       monitored.  This value will be the same as the interval duration
       (900 seconds), except in a situation where performance data
       could not be collected for any reason."
     ::= { gBondPortPm15MinEntry 2 }






Beili & Morgenstern          Standards Track                   [Page 48]


RFC 6765                       G.Bond MIB                  February 2013


   gBondPortPm15MinIntervalES  OBJECT-TYPE
     SYNTAX      HCPerfIntervalCount
     UNITS       "seconds"
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
       "A count of Errored Seconds (ES) on the GBS in the 15-minute
       performance history interval.

       This object maps to the TR-159 attribute
       aGroupPerf15MinIntervalES."
     REFERENCE
       "[TR-159], Section 5.5.1.59"
     ::= { gBondPortPm15MinEntry 3 }

   gBondPortPm15MinIntervalSES  OBJECT-TYPE
     SYNTAX      HCPerfIntervalCount
     UNITS       "seconds"
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
       "A count of Severely Errored Seconds (SES) on the GBS in the
       15-minute performance history interval.

       This object maps to the TR-159 attribute
       aGroupPerf15MinIntervalSES."
     REFERENCE
       "[TR-159], Section 5.5.1.60"
     ::= { gBondPortPm15MinEntry 4 }

   gBondPortPm15MinIntervalUAS  OBJECT-TYPE
     SYNTAX      HCPerfIntervalCount
     UNITS       "seconds"
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
       "A count of Unavailable Seconds (UAS) on the GBS in the current
       15-minute performance interval.

       This object maps to the TR-159 attribute
       aGroupPerf15MinIntervalUAS."
     REFERENCE
       "[TR-159], Section 5.5.1.61"
     ::= { gBondPortPm15MinEntry 5 }

   gBondPortPm15MinIntervalValid  OBJECT-TYPE
     SYNTAX      TruthValue
     MAX-ACCESS  read-only



Beili & Morgenstern          Standards Track                   [Page 49]


RFC 6765                       G.Bond MIB                  February 2013


     STATUS      current
     DESCRIPTION
       "A read-only object indicating whether or not this history
       bucket contains valid data.  A valid bucket is reported as
       true(1) and an invalid bucket as false(2).
       If this history bucket is invalid, the BTU-C MUST NOT produce
       notifications based upon the value of the counters in this
       bucket.
       Note that an implementation may decide not to store invalid
       history buckets in its database.  In such a case, this object
       is not required, as only valid history buckets are available
       while invalid history buckets are simply not in the database.

       This object maps to the TR-159 attribute
       aGroupPerf15MinIntervalValid."
     REFERENCE
       "[TR-159], Section 5.5.1.58"
     ::= { gBondPortPm15MinEntry 6 }

   -- PM history: 1-day buckets

   gBondPortPm1DayTable OBJECT-TYPE
     SYNTAX      SEQUENCE OF GBondPortPm1DayEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
       "This table contains historical 1-day buckets of Performance
       Monitoring information for a GBS port (a row for each 1-day
       interval, up to 7 intervals).
       Entries in this table MUST be maintained in a persistent manner."
     ::= { gBondPortPM 3 }

   gBondPortPm1DayEntry OBJECT-TYPE
     SYNTAX      GBondPortPm1DayEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
       "An entry in the G.Bond Port historical 1-day PM table.
       Each entry represents Performance Monitoring data for a GBS port,
       indexed by the ifIndex, collected during a particular 1-day
       interval, indexed by the gBondPortPm1DayIntervalIndex."
     INDEX  { ifIndex, gBondPortPm1DayIntervalIndex }
     ::= { gBondPortPm1DayTable 1 }

   GBondPortPm1DayEntry ::=
     SEQUENCE {
       gBondPortPm1DayIntervalIndex          Unsigned32,
       gBondPortPm1DayIntervalMoniTime       HCPerfTimeElapsed,



Beili & Morgenstern          Standards Track                   [Page 50]


RFC 6765                       G.Bond MIB                  February 2013


       gBondPortPm1DayIntervalES             HCPerfIntervalCount,
       gBondPortPm1DayIntervalSES            HCPerfIntervalCount,
       gBondPortPm1DayIntervalUAS            HCPerfIntervalCount,
       gBondPortPm1DayIntervalValid          TruthValue
     }

   gBondPortPm1DayIntervalIndex  OBJECT-TYPE
     SYNTAX      Unsigned32 (1..7)
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
       "Performance data interval number.  1 is the most recent
       previous interval; interval 7 is 7 days ago.
       Intervals 2..7 are OPTIONAL.

       This object maps to the TR-159 attribute
       aGroupPerf1DayIntervalNumber."
     REFERENCE
       "[TR-159], Section 5.5.1.62"
     ::= { gBondPortPm1DayEntry 1 }

   gBondPortPm1DayIntervalMoniTime  OBJECT-TYPE
     SYNTAX      HCPerfTimeElapsed
     UNITS       "seconds"
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
       "A count of seconds over which the performance data was actually
       monitored.  This value will be the same as the interval duration
       (86400 seconds), except in a situation where performance data
       could not be collected for any reason.

       This object maps to the TR-159 attribute
       aGroupPerf1DayIntervalMoniSecs."
     REFERENCE
       "[TR-159], Section 5.5.1.64"
     ::= { gBondPortPm1DayEntry 2 }

   gBondPortPm1DayIntervalES  OBJECT-TYPE
     SYNTAX      HCPerfIntervalCount
     UNITS       "seconds"
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
       "A count of Errored Seconds (ES) on the GBS in the 1-day
       performance history interval.





Beili & Morgenstern          Standards Track                   [Page 51]


RFC 6765                       G.Bond MIB                  February 2013


       This object maps to the TR-159 attribute
       aGroupPerf1DayIntervalES."
     REFERENCE
       "[TR-159], Section 5.5.1.65"
     ::= { gBondPortPm1DayEntry 3 }

   gBondPortPm1DayIntervalSES  OBJECT-TYPE
     SYNTAX      HCPerfIntervalCount
     UNITS       "seconds"
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
       "A count of Severely Errored Seconds (SES) on the GBS in the
       1-day performance history interval.

       This object maps to the TR-159 attribute
       aGroupPerf1DayIntervalSES."
     REFERENCE
       "[TR-159], Section 5.5.1.66"
     ::= { gBondPortPm1DayEntry 4 }

   gBondPortPm1DayIntervalUAS  OBJECT-TYPE
     SYNTAX      HCPerfIntervalCount
     UNITS       "seconds"
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
       "A count of Unavailable Seconds (UAS) on the GBS in the current
       1-day performance interval.

       This object maps to the TR-159 attribute
       aGroupPerf1DayIntervalUAS."
     REFERENCE
       "[TR-159], Section 5.5.1.67"
     ::= { gBondPortPm1DayEntry 5 }

   gBondPortPm1DayIntervalValid  OBJECT-TYPE
     SYNTAX      TruthValue
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
       "A read-only object indicating whether or not this history
       bucket contains valid data.  A valid bucket is reported as
       true(1) and an invalid bucket as false(2).
       If this history bucket is invalid, the BTU-C MUST NOT produce
       notifications based upon the value of the counters in this
       bucket.




Beili & Morgenstern          Standards Track                   [Page 52]


RFC 6765                       G.Bond MIB                  February 2013


       Note that an implementation may decide not to store invalid
       history buckets in its database.  In such a case, this object
       is not required, as only valid history buckets are available
       while invalid history buckets are simply not in the database.

       This object maps to the TR-159 attribute
       aGroupPerf1DayIntervalValid."
     REFERENCE
       "[TR-159], Section 5.5.1.63"
     ::= { gBondPortPm1DayEntry 6 }


   -- Performance Monitoring TCA Configuration profile

   gBondPortPmTcaProfileTable OBJECT-TYPE
     SYNTAX      SEQUENCE OF GBondPortPmTcaProfileEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
       "This table supports definitions of Performance Monitoring (PM)
       Threshold Crossing Alert (TCA) configuration profiles for GBS
       ports.
       Entries in this table MUST be maintained in a persistent manner."
     ::= { gBondPortPM 4 }

   gBondPortPmTcaProfileEntry OBJECT-TYPE
     SYNTAX      GBondPortPmTcaProfileEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
       "An entry in the GBS PM TCA Configuration table.
       Each entry corresponds to a single TCA configuration profile.
       Each profile contains a set of parameters for setting alarm
       thresholds for various performance attributes monitored at GBS
       ports.  Profiles may be created/deleted using the row
       creation/deletion mechanism via
       gBondPortPmTcaProfileRowStatus.  If an active entry is
       referenced via gBondPortConfPmTcaConfProfile, the entry MUST
       remain active until all references are removed.
       A default profile with an index of 'DEFVAL' will always exist,
       and its parameters will be set to vendor-specific values
       unless otherwise specified in this document."
     INDEX  { gBondPortPmTcaProfileName }
     ::= { gBondPortPmTcaProfileTable 1 }







Beili & Morgenstern          Standards Track                   [Page 53]


RFC 6765                       G.Bond MIB                  February 2013


   GBondPortPmTcaProfileEntry ::=
     SEQUENCE {
       gBondPortPmTcaProfileName           SnmpAdminString,
       gBondPortPmTcaProfileThresh15MinES  HCPerfIntervalThreshold,
       gBondPortPmTcaProfileThresh15MinSES HCPerfIntervalThreshold,
       gBondPortPmTcaProfileThresh15MinUAS HCPerfIntervalThreshold,
       gBondPortPmTcaProfileThresh1DayES   GBondPm1DayIntervalThreshold,
       gBondPortPmTcaProfileThresh1DaySES  GBondPm1DayIntervalThreshold,
       gBondPortPmTcaProfileThresh1DayUAS  GBondPm1DayIntervalThreshold,
       gBondPortPmTcaProfileRowStatus      RowStatus
     }

   gBondPortPmTcaProfileName  OBJECT-TYPE
     SYNTAX      SnmpAdminString (SIZE (1..32))
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
       "This object is a unique index (name) associated with this
       GBS PM TCA profile."
     ::= { gBondPortPmTcaProfileEntry 1 }

   gBondPortPmTcaProfileThresh15MinES  OBJECT-TYPE
     SYNTAX      HCPerfIntervalThreshold
     UNITS       "seconds"
     MAX-ACCESS  read-create
     STATUS      current
     DESCRIPTION
       "A desired threshold for the number of Errored Seconds (ES)
       within any given 15-minute performance data collection interval.
       If the number of ESs in a particular 15-minute collection
       interval reaches or exceeds this value, a
       gBondPmTca15MinESCrossing notification MAY be generated if
       enabled by gBondPortConfPmTcaEnable.
       At most one notification can be sent per interval.
       Setting this attribute to zero (default) effectively disables
       the gBondPmTca15MinESCrossing notification.

       This object maps to the TR-159 attribute
       aGroupPerfThreshold15MinES."
     REFERENCE
       "[TR-159], Section 5.5.1.39"
     ::= { gBondPortPmTcaProfileEntry 2 }

   gBondPortPmTcaProfileThresh15MinSES  OBJECT-TYPE
     SYNTAX      HCPerfIntervalThreshold
     UNITS       "seconds"
     MAX-ACCESS  read-create
     STATUS      current



Beili & Morgenstern          Standards Track                   [Page 54]


RFC 6765                       G.Bond MIB                  February 2013


     DESCRIPTION
       "A desired threshold for the number of Severely Errored Seconds
       (SES) within any given 15-minute performance data collection
       interval.
       If the number of SESs in a particular 15-minute collection
       interval reaches or exceeds this value, a
       gBondPmTca15MinSESCrossing notification MAY be generated if
       enabled by gBondPortConfPmTcaEnable.
       At most one notification can be sent per interval.
       Setting this attribute to zero (default) effectively disables
       the gBondPmTca15MinSESCrossing notification.

       This object maps to the TR-159 attribute
       aGroupPerfThreshold15MinSES."
     REFERENCE
       "[TR-159], Section 5.5.1.40"
     ::= { gBondPortPmTcaProfileEntry 3 }

   gBondPortPmTcaProfileThresh15MinUAS  OBJECT-TYPE
     SYNTAX      HCPerfIntervalThreshold
     UNITS       "seconds"
     MAX-ACCESS  read-create
     STATUS      current
     DESCRIPTION
       "A desired threshold for the number of Unavailable Seconds (UAS)
       within any given 15-minute performance data collection interval.
       If the number of UASs in a particular 15-minute collection
       interval reaches or exceeds this value, a
       gBondPmTca15MinUASCrossing notification MAY be generated if
       enabled by gBondPortConfPmTcaEnable.
       At most one notification can be sent per interval.
       Setting this attribute to zero (default) effectively disables
       the gBondPmTca15MinUASCrossing notification.

       This object maps to the TR-159 attribute
       aGroupPerfThreshold15MinUAS."
     REFERENCE
       "[TR-159], Section 5.5.1.41"
     ::= { gBondPortPmTcaProfileEntry 4 }

   gBondPortPmTcaProfileThresh1DayES  OBJECT-TYPE
     SYNTAX      GBondPm1DayIntervalThreshold
     UNITS       "seconds"
     MAX-ACCESS  read-create
     STATUS      current
     DESCRIPTION
       "A desired threshold for the number of Errored Seconds (ES)
       within any given 1-day performance data collection interval.



Beili & Morgenstern          Standards Track                   [Page 55]


RFC 6765                       G.Bond MIB                  February 2013


       If the number of ESs in a particular 1-day collection interval
       reaches or exceeds this value, a gBondPmTca1DayESCrossing
       notification MAY be generated if enabled by
       gBondPortConfPmTcaEnable.
       At most one notification can be sent per interval.
       Setting this attribute to zero (default) effectively disables
       the gBondPmTca1DayESCrossing notification.

       This object maps to the TR-159 attribute
       aGroupPerfThreshold1DayES."
     REFERENCE
       "[TR-159], Section 5.5.1.51"
     ::= { gBondPortPmTcaProfileEntry 5 }

   gBondPortPmTcaProfileThresh1DaySES  OBJECT-TYPE
     SYNTAX      GBondPm1DayIntervalThreshold
     UNITS       "seconds"
     MAX-ACCESS  read-create
     STATUS      current
     DESCRIPTION
       "A desired threshold for the number of Severely Errored Seconds
       (SES) within any given 1-day performance data collection
       interval.
       If the number of SESs in a particular 1-day collection interval
       reaches or exceeds this value, a gBondPmTca1DaySESCrossing
       notification MAY be generated if enabled by
       gBondPortConfPmTcaEnable.
       At most one notification can be sent per interval.
       Setting this attribute to zero (default) effectively disables
       the gBondPmTca1DaySESCrossing notification.

       This object maps to the TR-159 attribute
       aGroupPerfThreshold1DaySES."
     REFERENCE
       "[TR-159], Section 5.5.1.52"
     ::= { gBondPortPmTcaProfileEntry 6 }

   gBondPortPmTcaProfileThresh1DayUAS  OBJECT-TYPE
     SYNTAX      GBondPm1DayIntervalThreshold
     UNITS       "seconds"
     MAX-ACCESS  read-create
     STATUS      current
     DESCRIPTION
       "A desired threshold for the number of Unavailable Seconds (UAS)
       within any given 1-day performance data collection interval.
       If the number of UASs in a particular 1-day collection interval
       reaches or exceeds this value, a gBondPmTca1DayUASCrossing
       notification MAY be generated if enabled by



Beili & Morgenstern          Standards Track                   [Page 56]


RFC 6765                       G.Bond MIB                  February 2013


       gBondPortConfPmTcaEnable.
       At most one notification can be sent per interval.
       Setting this attribute to zero (default) effectively disables
       the gBondPmTca1DayUASCrossing notification.

       This object maps to the TR-159 attribute
       aGroupPerfThreshold1DayUAS."
     REFERENCE
       "[TR-159], Section 5.5.1.53"
     ::= { gBondPortPmTcaProfileEntry 7 }

   gBondPortPmTcaProfileRowStatus  OBJECT-TYPE
     SYNTAX      RowStatus
     MAX-ACCESS  read-create
     STATUS      current
     DESCRIPTION
       "This object controls the creation, modification, or deletion
       of the associated entry in the gBondPortPmTcaProfileTable
       per the semantics of RowStatus.

       If an 'active' entry is referenced via
       gBondPortConfPmTcaConfProfile instance(s), the entry MUST
       remain 'active'.

       An 'active' entry SHALL NOT be modified.  In order to modify an
       existing entry, it MUST be taken out of service (by setting
       this object to 'notInService'), modified, and set to 'active'
       again."
     ::= { gBondPortPmTcaProfileEntry 8 }


   -- The BCE group

   gBondBceConfTable OBJECT-TYPE
     SYNTAX      SEQUENCE OF GBondBceConfEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION
       "Table for configuration of G.Bond common aspects for the
       Bonding Channel Entity (BCE) ports (modems/channels).

       Entries in this table MUST be maintained in a persistent
       manner."
     ::= { gBondBce 1 }

   gBondBceConfEntry OBJECT-TYPE
     SYNTAX      GBondBceConfEntry
     MAX-ACCESS  not-accessible



Beili & Morgenstern          Standards Track                   [Page 57]


RFC 6765                       G.Bond MIB                  February 2013


     STATUS      current
     DESCRIPTION
       "An entry in the G.Bond BCE Configuration table.
       Each entry represents common aspects of a G.Bond BCE port
       indexed by the ifIndex.  Note that a G.Bond BCE port can be
       stacked below a single GBS port, also indexed by the ifIndex,
       possibly together with other BCE ports if bonding is enabled."
     INDEX  { ifIndex }
     ::= { gBondBceConfTable 1 }

   GBondBceConfEntry ::=
     SEQUENCE {
       gBondBceConfRemoteDiscoveryCode    PhysAddress
     }

   gBondBceConfRemoteDiscoveryCode  OBJECT-TYPE
     SYNTAX      PhysAddress (SIZE (0|6))
     MAX-ACCESS  read-write
     STATUS      current
     DESCRIPTION
       "A remote discovery code of the BCE port at the CO.
       A 6-octet-long discovery code of the peer GBS connected via
       the BCE.
       Reading this object results in a Discovery Get operation.
       Setting this object to all zeroes results in a Discovery
       Clear_if_Same operation (the value of gBondPortConfDiscoveryCode
       at the peer GBS SHALL be the same as gBondPortConfDiscoveryCode
       of the local GBS associated with the BCE for the operation to
       succeed).
       Writing a non-zero value to this object results in a
       Discovery Set_if_Clear operation.
       A zero-length octet string SHALL be returned on an attempt to
       read this object when bonding is not enabled.

       This object is irrelevant in BCE-R port subtypes (CPE side):
       in this case, a zero-length octet string SHALL be returned on
       an attempt to read this object.  An attempt to change this
       object MUST be rejected (in the case of SNMP, with the error
       inconsistentValue).

       Discovery MUST be performed when the link is 'down'.
       Attempts to change this object MUST be rejected (in the case of
       SNMP, with the error inconsistentValue), If the link is 'up' or
       initializing.

       This object maps to the TR-159 attribute
       aLineRemoteDiscoveryCode."




Beili & Morgenstern          Standards Track                   [Page 58]


RFC 6765                       G.Bond MIB                  February 2013


     REFERENCE
       "[TR-159], Section 5.5.6.7"
     ::= { gBondBceConfEntry 1 }

  --
  -- Conformance Statements
  --

   gBondGroups      OBJECT IDENTIFIER ::= { gBondConformance 1 }

   gBondCompliances OBJECT IDENTIFIER ::= { gBondConformance 2 }

   -- Object Groups

   gBondBasicGroup OBJECT-GROUP
     OBJECTS {
       gBondPortStatOperScheme,
       gBondPortStatUpDataRate,
       gBondPortStatDnDataRate,
       gBondPortConfTargetUpDataRate,
       gBondPortConfTargetDnDataRate,
       gBondPortCapSchemesSupported,
       gBondPortCapCapacity,
       gBondPortStatNumBCEs,
       gBondPortStatSide,
       gBondPortStatFltStatus
     }
     STATUS      current
     DESCRIPTION
       "A collection of objects representing management information
       common to all types of G.Bond ports."
     ::= { gBondGroups 1 }

   gBondDiscoveryGroup OBJECT-GROUP
     OBJECTS {
       gBondPortStatPeerOperScheme,
       gBondPortCapPeerSchemesSupported,
       gBondPortCapPeerCapacity,
       gBondPortConfDiscoveryCode,
       gBondBceConfRemoteDiscoveryCode
     }
     STATUS      current
     DESCRIPTION
       "A collection of objects supporting OPTIONAL G.Bond discovery
       in G.Bond ports."
     ::= { gBondGroups 2 }





Beili & Morgenstern          Standards Track                   [Page 59]


RFC 6765                       G.Bond MIB                  February 2013


   gBondMultiSchemeGroup OBJECT-GROUP
     OBJECTS {
       gBondPortConfAdminScheme,
       gBondPortConfPeerAdminScheme
     }
     STATUS      current
     DESCRIPTION
       "A collection of objects providing OPTIONAL management
       information for G.Bond ports supporting multiple bonding
       schemes."
     ::= { gBondGroups 3 }

   gBondTcaConfGroup OBJECT-GROUP
     OBJECTS {
       gBondPortConfThreshLowUpRate,
       gBondPortConfThreshLowDnRate,
       gBondPortConfLowRateCrossingEnable
     }
     STATUS      current
     DESCRIPTION
       "A collection of objects required for configuration of alarm
       thresholds and notifications in G.Bond ports."
     ::= { gBondGroups 4 }

   gBondTcaNotificationGroup NOTIFICATION-GROUP
     NOTIFICATIONS {
       gBondLowUpRateCrossing,
       gBondLowDnRateCrossing
     }
     STATUS      current
     DESCRIPTION
       "This group supports notifications of significant conditions
       (non-PM threshold crossing alerts) associated with G.Bond ports."
     ::= { gBondGroups 5 }

   gBondPmCurGroup OBJECT-GROUP
     OBJECTS {
       gBondPortPmCurES,
       gBondPortPmCurSES,
       gBondPortPmCurUAS,
       gBondPortPmCur15MinValidIntervals,
       gBondPortPmCur15MinInvalidIntervals,
       gBondPortPmCur15MinTimeElapsed,
       gBondPortPmCur15MinES,
       gBondPortPmCur15MinSES,
       gBondPortPmCur15MinUAS,
       gBondPortPmCur1DayValidIntervals,
       gBondPortPmCur1DayInvalidIntervals,



Beili & Morgenstern          Standards Track                   [Page 60]


RFC 6765                       G.Bond MIB                  February 2013


       gBondPortPmCur1DayTimeElapsed,
       gBondPortPmCur1DayES,
       gBondPortPmCur1DaySES,
       gBondPortPmCur1DayUAS
     }
     STATUS      current
     DESCRIPTION
       "A collection of objects supporting OPTIONAL current Performance
       Monitoring information for G.Bond ports."
     ::= { gBondGroups 6 }

   gBondPm15MinGroup OBJECT-GROUP
     OBJECTS {
       gBondPortPm15MinIntervalMoniTime,
       gBondPortPm15MinIntervalES,
       gBondPortPm15MinIntervalSES,
       gBondPortPm15MinIntervalUAS,
       gBondPortPm15MinIntervalValid
     }
     STATUS      current
     DESCRIPTION
       "A collection of objects supporting OPTIONAL historical
       Performance Monitoring information for G.Bond ports, during
       previous 15-minute intervals."
     ::= { gBondGroups 7 }

   gBondPm1DayGroup OBJECT-GROUP
     OBJECTS {
       gBondPortPm1DayIntervalMoniTime,
       gBondPortPm1DayIntervalES,
       gBondPortPm1DayIntervalSES,
       gBondPortPm1DayIntervalUAS,
       gBondPortPm1DayIntervalValid
     }
     STATUS      current
     DESCRIPTION
       "A collection of objects supporting OPTIONAL historical
       Performance Monitoring information for G.Bond ports, during
       previous 1-day intervals."
     ::= { gBondGroups 8 }

   gBondPmTcaConfGroup OBJECT-GROUP
     OBJECTS {
       gBondPortConfPmTcaConfProfile,
       gBondPortConfPmTcaEnable,
       gBondPortPmTcaProfileThresh15MinES,
       gBondPortPmTcaProfileThresh15MinSES,
       gBondPortPmTcaProfileThresh15MinUAS,



Beili & Morgenstern          Standards Track                   [Page 61]


RFC 6765                       G.Bond MIB                  February 2013


       gBondPortPmTcaProfileThresh1DayES,
       gBondPortPmTcaProfileThresh1DaySES,
       gBondPortPmTcaProfileThresh1DayUAS,
       gBondPortPmTcaProfileRowStatus
     }
     STATUS      current
     DESCRIPTION
       "A collection of objects required for configuration of
       Performance Monitoring Threshold Crossing Alert notifications
       in G.Bond ports."
     ::= { gBondGroups 9 }

   gBondPmTcaNotificationGroup NOTIFICATION-GROUP
     NOTIFICATIONS {
       gBondPmTca15MinESCrossing,
       gBondPmTca15MinSESCrossing,
       gBondPmTca15MinUASCrossing,
       gBondPmTca1DayESCrossing,
       gBondPmTca1DaySESCrossing,
       gBondPmTca1DayUASCrossing
     }
     STATUS      current
     DESCRIPTION
       "This group supports notifications of Performance Monitoring
       Threshold Crossing Alerts associated with G.Bond ports."
     ::= { gBondGroups 10 }

  -- Compliance Statements

   gBondCompliance MODULE-COMPLIANCE
     STATUS      current
     DESCRIPTION
       "The compliance statement for G.Bond interfaces.
       Compliance with the following external compliance statements
       is REQUIRED:

       MIB Module             Compliance Statement
       ----------             --------------------
       IF-MIB                 ifCompliance3

       Compliance with the following external compliance statements
       is OPTIONAL for implementations supporting bonding with
       flexible cross-connect between the GBS and BCE ports:

       MIB Module             Compliance Statement
       ----------             --------------------
       IF-INVERTED-STACK-MIB  ifInvCompliance
       IF-CAP-STACK-MIB       ifCapStackCompliance"



Beili & Morgenstern          Standards Track                   [Page 62]


RFC 6765                       G.Bond MIB                  February 2013


     MODULE  -- this module
       MANDATORY-GROUPS {
         gBondBasicGroup,
         gBondTcaConfGroup,
         gBondTcaNotificationGroup
       }

       GROUP       gBondDiscoveryGroup
       DESCRIPTION
         "Support for this group is only required for implementations
         supporting the G.Bond Discovery function."

       GROUP       gBondMultiSchemeGroup
       DESCRIPTION
         "Support for this group is only required for implementations
         supporting multiple bonding schemes."

       GROUP       gBondPmCurGroup
       DESCRIPTION
         "Support for this group is only required for implementations
         supporting Performance Monitoring."

       GROUP       gBondPm15MinGroup
       DESCRIPTION
         "Support for this group is only required for implementations
         supporting 15-minute historical Performance Monitoring."

       GROUP       gBondPm1DayGroup
       DESCRIPTION
         "Support for this group is only required for implementations
         supporting 1-day historical Performance Monitoring."

       GROUP       gBondPmTcaConfGroup
       DESCRIPTION
         "Support for this group is only required for implementations
         supporting Performance Monitoring Threshold Crossing Alert
         notifications."

       GROUP       gBondPmTcaNotificationGroup
       DESCRIPTION
         "Support for this group is only required for implementations
         supporting Performance Monitoring Threshold Crossing Alert
         notifications."

       OBJECT      gBondPortCapSchemesSupported
       SYNTAX      IANAgBondSchemeList
       DESCRIPTION
         "Support for all bonding scheme types is not required.



Beili & Morgenstern          Standards Track                   [Page 63]


RFC 6765                       G.Bond MIB                  February 2013


         However, at least one value SHALL be supported."

       OBJECT      gBondPortCapPeerSchemesSupported
       SYNTAX      IANAgBondSchemeList
       DESCRIPTION
         "Support for all bonding scheme types is not required.
         However, at least one value SHALL be supported."

     ::= { gBondCompliances 1 }
END









































Beili & Morgenstern          Standards Track                   [Page 64]


RFC 6765                       G.Bond MIB                  February 2013


7.  IANA-Maintained G.Bond TC Definitions

   The IANA-GBOND-TC-MIB module IMPORTS objects from SNMPv2-SMI
   [RFC2578] and SNMPv2-TC [RFC2579].

IANA-GBOND-TC-MIB DEFINITIONS ::= BEGIN

  IMPORTS
    MODULE-IDENTITY,
    mib-2
      FROM SNMPv2-SMI
    TEXTUAL-CONVENTION
      FROM SNMPv2-TC
    ;
------------------------------------------------------------------------
  ianaGBondTcMIB MODULE-IDENTITY
    LAST-UPDATED "201302200000Z"  -- 20 February 2013
    ORGANIZATION "IANA"
    CONTACT-INFO "        Internet Assigned Numbers Authority

                  Postal: ICANN
                          12025 Waterfront Drive, Suite 300
                          Los Angeles, CA 90094-2536

                     Tel: +1-310-301-5800
                   EMail: iana@iana.org"

    DESCRIPTION
      "This MIB module defines IANAgBondScheme and IANAgBondSchemeList
      TEXTUAL-CONVENTIONs, specifying enumerated values of the
      gBondPortConfAdminScheme, gBondPortConfPeerAdminScheme,
      gBondPortStatOperScheme, gBondPortStatPeerOperScheme,
      gBondPortCapSchemesSupported, and gBondPortCapPeerSchemesSupported
      objects, respectively, as defined in the GBOND-MIB.

      It is intended that each new bonding scheme defined by the
      ITU-T Q4/SG15 working group and approved for publication in a
      revision of the ITU-T G.998 specification will be added to this
      MIB module, provided that it is suitable for being managed by the
      base objects in the GBOND-MIB.  An Expert Review, as defined in
      RFC 5226, is REQUIRED for such additions.

      The following references are used throughout this MIB module:

      [G.998.1] refers to:
        ITU-T Recommendation G.998.1: 'ATM-based multi-pair bonding',
        January 2005.




Beili & Morgenstern          Standards Track                   [Page 65]


RFC 6765                       G.Bond MIB                  February 2013


      [G.998.2] refers to:
        ITU-T Recommendation G.998.2: 'Ethernet-based multi-pair
        bonding', January 2005.

      [G.998.3] refers to:
        ITU-T Recommendation G.998.3: 'Multi-pair bonding using
        time-division inverse multiplexing', January 2005.

      Naming Conventions:
        BCE   - Bonding Channel Entity
        GBS   - Generic Bonding Sub-layer

      These references should be updated as appropriate when a new
      bonding scheme is added to this MIB module.

      Copyright (c) 2013 IETF Trust and the persons identified as
      authors of the code.  All rights reserved.

      Redistribution and use in source and binary forms, with or without
      modification, is permitted pursuant to, and subject to the license
      terms contained in, the Simplified BSD License set forth in
      Section 4.c of the IETF Trust's Legal Provisions Relating to IETF
      Documents (http://trustee.ietf.org/license-info)."

    REVISION    "201302200000Z"  -- 20 February 2013
    DESCRIPTION "Initial version, published as RFC 6765."

    ::= { mib-2 215 }

   -- Textual Conventions

   IANAgBondSchemeList ::= TEXTUAL-CONVENTION
     STATUS      current
     DESCRIPTION
       "This textual convention defines a bitmap of possible ITU-T
       G.998 (G.Bond) bonding schemes.  Currently, the following values
       are defined for the corresponding bonding schemes:
         g9981(1) - G.998.1 (G.Bond/ATM; see the G9981-MIB)
         g9982(2) - G.998.2 (G.Bond/Ethernet; see the G9982-MIB)
         g9983(3) - G.998.3 (G.Bond/TDIM; see the G9983-MIB)
       An additional value of none(0) can be returned as a result
       of a GET operation when a value of the object cannot be
       determined (for example, a peer GBS cannot be reached), the port
       does not support any kind of bonding, or when a single-BCE
       G.998.2 GBS supports bonding (frame fragmentation/reassembly)
       bypass."





Beili & Morgenstern          Standards Track                   [Page 66]


RFC 6765                       G.Bond MIB                  February 2013


     SYNTAX      BITS {
       none(0),
       g9981(1),
       g9982(2),
       g9983(3)
     }

   IANAgBondScheme ::= TEXTUAL-CONVENTION
     STATUS      current
     DESCRIPTION
       "This textual convention defines ITU-T G.998 bonding scheme
       values.  Possible values are:
         none(0)    - no bonding (e.g., on a single-BCE G.998.2 GBS)
                      or unknown
         g9981(1)   - G.998.1 (G.Bond/ATM)
         g9982(2)   - G.998.2 (G.Bond/Ethernet)
         g9983(3)   - G.998.3 (G.Bond/TDIM)"
     SYNTAX      INTEGER {
       none(0),
       g9981(1),
       g9982(2),
       g9983(3)
     }

END

8.  Security Considerations

   There are a number of management objects defined in this MIB module
   with a MAX-ACCESS clause of read-write and/or read-create.  Such
   objects may be considered sensitive or vulnerable in some network
   environments.  The support for SET operations in a non-secure
   environment without proper protection can have a negative effect on
   network operations.  These are the tables and objects and their
   sensitivity/vulnerability:

   o  Changing of the gBondPortConfAdminScheme object may lead to a
      potential locking of the link, if the peer device does not support
      the desired bonding scheme.

   o  Changing of the gBondPortConfDiscoveryCode object, before the
      discovery operation, may lead to a wrongful discovery -- for
      example, when two CO ports are connected to the same multi-channel
      RT port, while both CO ports have the same discovery register
      value.






Beili & Morgenstern          Standards Track                   [Page 67]


RFC 6765                       G.Bond MIB                  February 2013


   o  Changing of the target upstream/downstream data rate via
      gBondPortConfTargetUpDataRate/gBondPortConfTargetDnDataRate may
      lead to anything from degradation of link quality and data rate to
      a complete link initialization failure, as the ability of a G.Bond
      port to support a particular configuration depends on the copper
      environment.

   o  Activation of a specific line/channel may cause a severe
      degradation of service for another G.Bond port, whose channel(s)
      may be affected by the cross-talk from the newly activated
      channel.

   o  Removal of a channel from an operationally 'up' G.Bond port,
      aggregating several channels, may cause degradation of the port's
      data rate.

   Some of the readable objects in this MIB module (i.e., those with
   MAX-ACCESS other than not-accessible) may be considered sensitive or
   vulnerable in some network environments since, collectively, they
   provide information about the performance of network interfaces and
   can reveal some aspects of their configuration.

   In particular, since a bonded xDSL port can be comprised of multiple
   Unshielded Twisted Pair (UTP) voice-grade copper, located in the same
   bundle with other pairs belonging to another operator/customer, it is
   theoretically possible to eavesdrop on a G.Bond transmission, simply
   by "listening" to cross-talk from the bonded pairs, especially if the
   operating parameters of the G.Bond link in question are known.

   It is thus important to control even GET and/or NOTIFY access to
   these objects and possibly to even encrypt the values of these
   objects when sending them over the network via SNMP.  These are the
   tables and objects and their sensitivity/vulnerability:

   o  gBondPortStatTable - objects in this table provide status
      information for the G.Bond port, which may aid in identification
      of the pairs belonging to the bonded port and eavesdropping on the
      traffic over that port.

   SNMP versions prior to SNMPv3 did not include adequate security.
   Even if the network itself is secure (for example by using IPsec),
   there is no control as to who on the secure network is allowed to
   access and GET/SET (read/change/create/delete) the objects in this
   MIB module.

   Implementations SHOULD provide the security features described by the
   SNMPv3 framework (see [RFC3410]), and implementations claiming
   compliance to the SNMPv3 standard MUST include full support for



Beili & Morgenstern          Standards Track                   [Page 68]


RFC 6765                       G.Bond MIB                  February 2013


   authentication and privacy via the User-based Security Model (USM)
   [RFC3414] with the AES cipher algorithm [RFC3826].  Implementations
   MAY also provide support for the Transport Security Model (TSM)
   [RFC5591] in combination with a secure transport such as SSH
   [RFC5592] or TLS/DTLS [RFC6353].

   Further, deployment of SNMP versions prior to SNMPv3 is NOT
   RECOMMENDED.  Instead, it is RECOMMENDED to deploy SNMPv3 and to
   enable cryptographic security.  It is then a customer/operator
   responsibility to ensure that the SNMP entity giving access to an
   instance of this MIB module is properly configured to give access to
   the objects only to those principals (users) that have legitimate
   rights to indeed GET or SET (change/create/delete) them.

9.  IANA Considerations

   Three new values of IANAifType -- g9981(263), g9982(264), and
   g9983(265) -- have been allocated by IANA <http://www.iana.org/> in
   the IANAifType-MIB module [IANAifType-MIB].

   An object identifier for gBondMIB MODULE-IDENTITY has been allocated
   by IANA in the MIB-2 transmission sub-tree (211).

   This document defines the first version of the IANA-maintained IANA-
   GBOND-TC-MIB module.  It is intended that each new G.998 bonding
   scheme defined by the ITU-T Q4/SG15 working group and approved for
   publication in a revision of ITU-T G.998.x will be added to the IANA-
   maintained MIB module, provided that it is suitable for being managed
   by the base objects in the GBOND-MIB module.  An object identifier
   for ianaGBondTcMIB MODULE-IDENTITY has been allocated by IANA in the
   MIB-2 transmission sub-tree (215).

   For each new bonding scheme added, a short description of the bonding
   protocol and, wherever possible, a reference to a publicly available
   specification SHOULD be specified.  An Expert Review, as defined in
   [RFC5226], is REQUIRED for each modification.

10.  Acknowledgments

   This document was produced by the [ADSLMIB] working group.

   Special thanks to Dan Romascanu for his meticulous review of this
   text.








Beili & Morgenstern          Standards Track                   [Page 69]


RFC 6765                       G.Bond MIB                  February 2013


11.  References

11.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC2578]  McCloghrie, K., Ed., Perkins, D., Ed., and J.
              Schoenwaelder, Ed., "Structure of Management Information
              Version 2 (SMIv2)", STD 58, RFC 2578, April 1999.

   [RFC2579]  McCloghrie, K., Ed., Perkins, D., Ed., and J.
              Schoenwaelder, Ed., "Textual Conventions for SMIv2",
              STD 58, RFC 2579, April 1999.

   [RFC2580]  McCloghrie, K., Perkins, D., and J. Schoenwaelder,
              "Conformance Statements for SMIv2", STD 58, RFC 2580,
              April 1999.

   [RFC2863]  McCloghrie, K. and F. Kastenholz, "The Interfaces Group
              MIB", RFC 2863, June 2000.

   [RFC3411]  Harrington, D., Presuhn, R., and B. Wijnen, "An
              Architecture for Describing Simple Network Management
              Protocol (SNMP) Management Frameworks", STD 62, RFC 3411,
              December 2002.

   [RFC3414]  Blumenthal, U. and B. Wijnen, "User-based Security Model
              (USM) for version 3 of the Simple Network Management
              Protocol (SNMPv3)", STD 62, RFC 3414, December 2002.

   [RFC3705]  Ray, B. and R. Abbi, "High Capacity Textual Conventions
              for MIB Modules Using Performance History Based on 15
              Minute Intervals", RFC 3705, February 2004.

   [RFC3826]  Blumenthal, U., Maino, F., and K. McCloghrie, "The
              Advanced Encryption Standard (AES) Cipher Algorithm in the
              SNMP User-based Security Model", RFC 3826, June 2004.

   [RFC5226]  Narten, T. and H. Alvestrand, "Guidelines for Writing an
              IANA Considerations Section in RFCs", BCP 26, RFC 5226,
              May 2008.

   [RFC5591]  Harrington, D. and W. Hardaker, "Transport Security Model
              for the Simple Network Management Protocol (SNMP)",
              RFC 5591, June 2009.





Beili & Morgenstern          Standards Track                   [Page 70]


RFC 6765                       G.Bond MIB                  February 2013


   [RFC5592]  Harrington, D., Salowey, J., and W. Hardaker, "Secure
              Shell Transport Model for the Simple Network Management
              Protocol (SNMP)", RFC 5592, June 2009.

   [RFC6353]  Hardaker, W., "Transport Layer Security (TLS) Transport
              Model for the Simple Network Management Protocol (SNMP)",
              RFC 6353, July 2011.

   [TR-159]   Beili, E. and M. Morgenstern, "Management Framework for
              xDSL Bonding", Broadband Forum Technical Report TR-159,
              December 2008, <http://www.broadband-forum.org/technical/
              download/TR-159.pdf>.

11.2.  Informative References

   [802.3]    IEEE, "IEEE Standard for Information technology -
              Telecommunications and information exchange between
              systems - Local and metropolitan area networks - Specific
              requirements - Part 3: Carrier Sense Multiple Access with
              Collision Detection (CSMA/CD) Access Method and Physical
              Layer Specifications", IEEE Std 802.3-2005, December 2005.

   [ADSLMIB]  IETF, "ADSL MIB (adslmib) Charter",
              <http://datatracker.ietf.org/wg/adslmib/charter/>.

   [AF-PHY-0086]
              ATM Forum, "Inverse Multiplexing for ATM (IMA)
              Specification Version 1.1", ATM Forum specification af-
              phy-0086.001, March 1999, <http://www.broadband-forum.org/
              ftp/pub/approved-specs/af-phy-0086.001.pdf>.

   [G.994.1]  ITU-T, "Handshake procedures for digital subscriber line
              (DSL) transceivers", ITU-T Recommendation G.994.1,
              June 2012, <http://www.itu.int/rec/T-REC-G.994.1/en>.

   [G.998.1]  ITU-T, "ATM-based multi-pair bonding", ITU-T
              Recommendation G.998.1, January 2005,
              <http://www.itu.int/rec/T-REC-G.998.1/en>.

   [G.998.2]  ITU-T, "Ethernet-based multi-pair bonding", ITU-T
              Recommendation G.998.2, January 2005,
              <http://www.itu.int/rec/T-REC-G.998.2/en>.

   [G.998.3]  ITU-T, "Multi-pair bonding using time-division inverse
              multiplexing", ITU-T Recommendation G.998.3, January 2005,
              <http://www.itu.int/rec/T-REC-G.998.3/en>.





Beili & Morgenstern          Standards Track                   [Page 71]


RFC 6765                       G.Bond MIB                  February 2013


   [IANAifType-MIB]
              Internet Assigned Numbers Authority (IANA), "IANAifType
              Textual Convention definition",
              <http://www.iana.org/assignments/ianaiftype-mib>.

   [RFC2790]  Waldbusser, S. and P. Grillo, "Host Resources MIB",
              RFC 2790, March 2000.

   [RFC2864]  McCloghrie, K. and G. Hanson, "The Inverted Stack Table
              Extension to the Interfaces Group MIB", RFC 2864,
              June 2000.

   [RFC3410]  Case, J., Mundy, R., Partain, D., and B. Stewart,
              "Introduction and Applicability Statements for Internet-
              Standard Management Framework", RFC 3410, December 2002.

   [RFC3440]  Ly, F. and G. Bathrick, "Definitions of Extension Managed
              Objects for Asymmetric Digital Subscriber Lines",
              RFC 3440, December 2002.

   [RFC3593]  Tesink, K., "Textual Conventions for MIB Modules Using
              Performance History Based on 15 Minute Intervals",
              RFC 3593, September 2003.

   [RFC3728]  Ray, B. and R. Abbi, "Definitions of Managed Objects for
              Very High Speed Digital Subscriber Lines (VDSL)",
              RFC 3728, February 2004.

   [RFC4181]  Heard, C., "Guidelines for Authors and Reviewers of MIB
              Documents", BCP 111, RFC 4181, September 2005.

   [RFC4319]  Sikes, C., Ray, B., and R. Abbi, "Definitions of Managed
              Objects for High Bit-Rate DSL - 2nd generation (HDSL2) and
              Single-Pair High-Speed Digital Subscriber Line (SHDSL)
              Lines", RFC 4319, December 2005.

   [RFC4706]  Morgenstern, M., Dodge, M., Baillie, S., and U. Bonollo,
              "Definitions of Managed Objects for Asymmetric Digital
              Subscriber Line 2 (ADSL2)", RFC 4706, November 2006.

   [RFC5066]  Beili, E., "Ethernet in the First Mile Copper (EFMCu)
              Interfaces MIB", RFC 5066, November 2007.

   [RFC5650]  Morgenstern, M., Baillie, S., and U. Bonollo, "Definitions
              of Managed Objects for Very High Speed Digital Subscriber
              Line 2 (VDSL2)", RFC 5650, September 2009.





Beili & Morgenstern          Standards Track                   [Page 72]


RFC 6765                       G.Bond MIB                  February 2013


   [RFC5905]  Mills, D., Martin, J., Burbank, J., and W. Kasch, "Network
              Time Protocol Version 4: Protocol and Algorithms
              Specification", RFC 5905, June 2010.

   [RFC6766]  Beili, E., "xDSL Multi-Pair Bonding Using Time-Division
              Inverse Multiplexing (G.Bond/TDIM) MIB", RFC 6766,
              February 2013.

   [RFC6767]  Beili, E. and M. Morgenstern, "Ethernet-Based xDSL Multi-
              Pair Bonding (G.Bond/Ethernet) MIB", RFC 6767,
              February 2013.

   [RFC6768]  Beili, E., "ATM-Based xDSL Bonded Interfaces MIB",
              RFC 6768, February 2013.

Authors' Addresses

   Edward Beili
   Actelis Networks
   25 Bazel St.
   Petach-Tikva  49103
   Israel

   Phone: +972-3-924-3491
   EMail: edward.beili@actelis.com


   Moti Morgenstern
   ECI Telecom
   30 Hasivim St.
   Petach-Tikva  4951169
   Israel

   Phone: +972-3-926-6258
   EMail: moti.morgenstern@ecitele.com
















Beili & Morgenstern          Standards Track                   [Page 73]