[RFC Home] [TEXT|PDF|HTML] [Tracker] [IPR] [Info page]

PROPOSED STANDARD
Network Working Group                                     H. Schulzrinne
Request for Comments: 3994                                   Columbia U.
Category: Standards Track                                   January 2005


        Indication of Message Composition for Instant Messaging

Status of This Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

Copyright Notice

   Copyright (C) The Internet Society (2005).

Abstract

   In instant messaging (IM) systems, it is useful to know during an IM
   conversation whether the other party is composing a message; e.g.,
   typing or recording an audio message.  This document defines a new
   status message content type and XML namespace that conveys
   information about a message being composed.  The status message can
   indicate the composition of a message of any type, including text,
   voice, or video.  The status messages are delivered to the instant
   messaging recipient in the same manner as the instant messages
   themselves.





















Schulzrinne                 Standards Track                     [Page 1]


RFC 3994                      isComposing                   January 2005


Table of Contents

   1.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . .  2
   2.  Terminology and Conventions  . . . . . . . . . . . . . . . . .  3
   3.  Description  . . . . . . . . . . . . . . . . . . . . . . . . .  3
       3.1.  Overview . . . . . . . . . . . . . . . . . . . . . . . .  3
       3.2.  Message Composer Behavior  . . . . . . . . . . . . . . .  4
       3.3.  Status Message Receiver Behavior . . . . . . . . . . . .  5
       3.4.  Message Content  . . . . . . . . . . . . . . . . . . . .  6
       3.5.  Additional Status Information  . . . . . . . . . . . . .  6
   4.  Using the Status Message . . . . . . . . . . . . . . . . . . .  7
   5.  Examples . . . . . . . . . . . . . . . . . . . . . . . . . . .  8
   6.  XML Document Format  . . . . . . . . . . . . . . . . . . . . .  8
       6.1.  XML Schema . . . . . . . . . . . . . . . . . . . . . . .  9
   7.  Security Considerations  . . . . . . . . . . . . . . . . . . .  9
   8.  IANA Considerations  . . . . . . . . . . . . . . . . . . . . . 10
       8.1.  Content-Type Registration for
             'application/im-iscomposing+xml' . . . . . . . . . . . . 10
       8.2.  URN Sub-Namespace Registration for
             'urn:ietf:params:xml:ns:im-iscomposing'  . . . . . . . . 11
       8.3.  Schema Registration  . . . . . . . . . . . . . . . . . . 11
   9.  Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 11
   10. References . . . . . . . . . . . . . . . . . . . . . . . . . . 12
       10.1. Normative References . . . . . . . . . . . . . . . . . . 12
       10.2. Informative References . . . . . . . . . . . . . . . . . 12
   Author's Address . . . . . . . . . . . . . . . . . . . . . . . . . 12
   Full Copyright Statement . . . . . . . . . . . . . . . . . . . . . 13

1.  Introduction

   By definition, instant messaging (IM) is message based:  A user
   composes a message by, for example, typing, speaking, or recording a
   video clip.  This message is then sent to one or more recipients.
   Unlike email, instant messaging is often conversational, so the other
   party is waiting for a response.  If no response is forthcoming, a
   participant in an instant messaging conversation may erroneously
   assume either that the communication partner has left or that it is
   her turn to type again, leading to two messages "crossing on the
   wire".

   To avoid this uncertainty, a number of commercial instant messaging
   systems feature an "is-typing" indication sent as soon as one party
   starts typing a message.  In this document, we describe a generalized
   version of this indication, called the isComposing status message.
   As described in Section 3 in more detail, a status message is
   delivered to the instant message recipient in the same manner as are
   the messages themselves.  The isComposing status messages can
   announce the composition of any media type, not just text.  For



Schulzrinne                 Standards Track                     [Page 2]


RFC 3994                      isComposing                   January 2005


   example, it might be used if somebody is recording an audio or video
   clip.  In addition, it can be extended to convey other instant
   messaging user states in the future.  Below, we will call these
   messages "status messages" for brevity.

   The status messages are carried as XML, as instances of the XML
   schema defined in Section 6, and labeled as an
   application/im-iscomposing+xml content type.

   These status messages can be considered somewhat analogous to the
   comfort noise packets that are transmitted in silence-suppressed
   interactive voice conversations.

      Events and extensions to presence, such as PIDF [6], were also
      considered but have a number of disadvantages.  They add more
      overhead, as an explicit and periodic subscription is required.
      For page-mode delivery, subscribing to the right user agent and
      set of messages may not be easy.  An in-band, message-based
      mechanism is also easier to translate across heterogeneous instant
      messaging systems.

   The mechanism described here aims to satisfy the requirements in [7].

2.  Terminology and Conventions

   This memo makes use of the vocabulary defined in the IMPP Model
   document [1].  In this memo, terms such as CLOSED, INSTANT MESSAGE,
   OPEN, PRESENCE SERVICE, PRESENTITY, WATCHER, and WATCHER USER AGENT
   are used with the same meaning defined therein.  The key words MUST,
   MUST NOT, REQUIRED, SHOULD, SHOULD NOT, RECOMMENDED, MAY, and
   OPTIONAL in this document are to be interpreted as described in BCP
   14, RFC 2119 [2].

   This document discusses two kinds of messages; namely, the instant
   message (IM) conveying actual content between two or more users
   engaged in an instant messaging conversation, and the status message,
   described in this document, which indicates the current composing
   status to the other participants in a conversation.  We use the terms
   "content message" and "status message" for these two message types.

3.  Description

3.1.  Overview

   We model the user of an instant messaging system as being in one of
   several states, in this document limited to "idle" and "active".  By
   default, the user is in "idle" state, both before starting to compose
   a message and after sending it.



Schulzrinne                 Standards Track                     [Page 3]


RFC 3994                      isComposing                   January 2005


3.2.  Message Composer Behavior

   Only the instant messaging user agent actively composing a content
   message generates status messages indicating the current state.  When
   the user starts composing a content message (the actual instant
   message), the state becomes "active", and an isComposing status
   message containing a <state> element indicating "active" is sent to
   the recipient of the content message being composed.  As long as the
   user continues to produce instant message content, the user remains
   in state "active".

   There are two sender timers: the active-state refresh interval, and
   the idle time-out interval.

   The active-state refresh interval determines how often "active" state
   messages are sent while the composer remains in "active" state.  The
   interval is chosen by the composing user and indicated in the
   <refresh> element in the status message, expressed in integer
   seconds.  Each transmission of the isComposing message resets the
   timer.  The interval SHOULD be no shorter than 60 seconds.  A message
   composer MAY decide not to send active-state refresh messages at all.
   This is indicated by omitting the refresh interval; this will cause
   the receiver to assume that it has gone idle after 120 seconds.  (In
   most cases, the content message will have been sent by then.)  No
   refresh messages are sent in "idle" state.

      The active-state refresh mechanism deals with the case in which
      the user logs off or the application crashes before the content
      message is completed.

   If the user stops composing for more than a configured time interval,
   the idle timeout, the state transitions to "idle", and an "idle"
   status message is sent.  If the user starts composing again while in
   "idle" state, the state transitions to "active", and the
   corresponding status message is sent.  Unless otherwise configured by
   the user, the idle timeout SHOULD have a default value of 15 seconds.

   If a content message is sent before the idle threshold expires, no
   "idle" state indication is needed.  Thus, in most cases, only one
   status message is generated for each content message.  In any event,
   the message rate is limited to one status message per refresh
   threshold interval.









Schulzrinne                 Standards Track                     [Page 4]


RFC 3994                      isComposing                   January 2005


   The state transitions are shown in Figure 1.

                      +-------------+
                      |+-----------+|
                      ||           ||
               +------>|   idle    |<--------+
               |      ||           ||        |
               |      |+-----------+|        |
               |      +------+------+        |
   content     |             |               | idle timeout
   msg. sent   |             | composing     | w/o activity
   ----------- |             | ------------- | ------------------
    --         |             | "active" msg. | "idle" status msg.
               |             |               |
               |      +------V------+        |
               |      |             |        |
               |      |             |        |
               |      |             |        |
               +------+   active    +--------+
                      |             |
                      |             |------+
                      +------^------+      | refresh timeout
                             |             | --------------------
                             |             | "active" status msg.
                             +-------------+

                   Figure 1. Sender State Diagram

3.3.  Status Message Receiver Behavior

   The status message receiver uses the status messages to determine the
   state of the content message sender.  If the most recent "active"
   status message contained a <refresh> value, the refresh time-out is
   set to that value; otherwise, it is 120 seconds.  The state at the
   receiver transitions from "active" to "idle" under three conditions:

      1.  A status message with status "idle" is received.
      2.  A content message is received.
      3.  The refresh interval expires.

   Receivers MUST be able to handle multiple consecutive isComposing
   messages with "active" state, regardless of the refresh interval.









Schulzrinne                 Standards Track                     [Page 5]


RFC 3994                      isComposing                   January 2005


   The state transitions are shown in Figure 2.

                           +-------------+
                           |+-----------+|
                           ||           ||
                    +------>|   idle    |<------+
                    |      ||           ||      |
                    |      |+-----------+|      |
                    |      +------+------+      |
                    |             |             |
       "idle" recd. |             |"active" msg.| refresh timeout
   or content recd. |             |             | or 120s
                    |             |             |
                    |      +------V------+      |
                    |      |             |      |
                    |      |             |      |
                    |      |             |      |
                    +------+   active    +------+
                           |             |
                           |             |
                           +-------------+

                 Figure 2. Receiver State Diagram

3.4.  Message Content

   We briefly describe the message content to summarize the discussion
   above.  This description is non-normative.  The schema (Section 6)
   should be consulted for the normative message format.

   The message consists of an <isComposing> element, with a mandatory
   <state> element indicating the composer state; i.e., idle or active.
   In addition, there are three optional elements: <lastactive>,
   indicating the time of last activity; <contenttype>, the type of
   message being created; and <refresh>, the time interval after which
   the receiver can expect an update from the composer.  Details are
   given in the following section.

3.5.  Additional Status Information

   The status message contains additional optional elements to provide
   further details on the composition activity.  Any of these can appear
   in both "active" and "idle" state messages.








Schulzrinne                 Standards Track                     [Page 6]


RFC 3994                      isComposing                   January 2005


   The optional <lastactive> element describes the absolute time when
   the user last added or edited content.

   The optional <contenttype> element indicates the type of medium in
   which the messaging terminal is currently composing.  It can contain
   either just a MIME media type, such as "audio" or "text", or a media
   type and subtype, such as "text/html".  It is best understood as a
   hint to the user, not a guarantee, that the actual content message
   will indeed contain only the content indicated.  It allows the human
   recipient to be prepared for the likely message format.

   To further describe message composition, the XML schema or the set of
   allowable state names can be extended in future documents.
   Recipients of status messages implementing this specification without
   extensions MUST treat state tokens other than "idle" and "active" as
   "idle".  Additional elements MUST use their own namespaces and MUST
   be designed so that receivers can safely ignore such extensions.
   Adding elements to the namespace defined in this document is not
   permitted.

   The isComposing status message MAY be carried in CPIM messages [3].

      Such a wrapper is particularly useful if messages are relayed by a
      conference server since the CPIM message maintains the identity of
      the original composer.

4.  Using the Status Message

   The isComposing status message can be used with either page mode or
   session mode, although session mode is a more natural fit.  In
   session mode, the status message is sent as part of the messaging
   stream.  Its usage is negotiated just like any other media type in
   that stream, with details depending on the session mode protocol.

   Sending the status messages within the session-mode messaging stream
   has at least three benefits.  First, it ensures proper ordering and
   synchronization with the actual content messages being composed.  In
   messaging systems that guarantee in-order delivery of messages, this
   approach avoids having an active indication appear at the receiver
   after the actual message has been delivered, due to message
   reordering across two delivery mechanisms.

   Secondly, end-to-end security can be applied to the messages.
   Thirdly, session negotiation mechanisms can be used to turn it on and
   off at any time, and even to negotiate its use in a single direction
   at a time.





Schulzrinne                 Standards Track                     [Page 7]


RFC 3994                      isComposing                   January 2005


   Usage with page mode is also straightforward: The status message is
   carried as the body of a page mode message.  In SIP-based IM, The
   composer MUST cease transmitting status messages if the receiver
   returned a 415 status code (Unsupported Media Type) in response to a
   MESSAGE request containing the status indication.

   The sender cannot be assured that the status message is delivered
   before the actual content being composed arrives.  However, SIP page
   mode is limited to one unacknowledged message, so out-of-order
   delivery is unlikely, albeit still possible if proxies are involved.

5.  Examples

   <?xml version="1.0" encoding="UTF-8"?>
   <isComposing xmlns="urn:ietf:params:xml:ns:im-iscomposing"
   xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
   xsi:schemaLocation="urn:ietf:params:xml:ns:im-composing
   iscomposing.xsd">
     <state>active</state>
     <contenttype>text/plain</contenttype>
     <refresh>90</refresh>
   </isComposing>

   <?xml version="1.0" encoding="UTF-8"?>
   <isComposing xmlns="urn:ietf:params:xml:ns:im-iscomposing"
   xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
   xsi:schemaLocation="urn:ietf:params:xml:ns:im-composing
   iscomposing.xsd">
     <state>idle</state>
     <lastactive>2003-01-27T10:43:00Z</lastactive>
     <contenttype>audio</contenttype>
   </isComposing>

6.  XML Document Format

   An isComposing document is an XML document that MUST be well formed
   and SHOULD be valid.  isComposing documents MUST be based on XML 1.0
   and MUST be encoded by using UTF-8.  This specification makes use of
   XML namespaces for identifying isComposing documents.  The namespace
   URI for elements defined for this purpose is a URN using the
   namespace identifier 'ietf'.  This URN is:

      urn:ietf:params:xml:ns:im-iscomposing








Schulzrinne                 Standards Track                     [Page 8]


RFC 3994                      isComposing                   January 2005


6.1.  XML Schema

   <?xml version="1.0" encoding="UTF-8"?>
   <xs:schema targetNamespace="urn:ietf:params:xml:ns:im-iscomposing"
     elementFormDefault="qualified"
     attributeFormDefault="unqualified"
     xmlns:xs="http://www.w3.org/2001/XMLSchema"
     xmlns:tns="urn:ietf:params:xml:ns:im-iscomposing">
     <xs:element name="isComposing">
       <xs:complexType>
         <xs:sequence>
           <xs:element name="state" type="xs:string"/>
           <xs:element name="lastactive" type="xs:dateTime"
             minOccurs="0"/>
           <xs:element name="contenttype" type="xs:string"
             minOccurs="0"/>
           <xs:element name="refresh" type="xs:positiveInteger"
             minOccurs="0"/>
           <xs:any namespace="##other" processContents="lax"
             minOccurs="0" maxOccurs="unbounded"/>
         </xs:sequence>
       </xs:complexType>
     </xs:element>
   </xs:schema>

7.  Security Considerations

   The isComposing indication provides a fine-grained view of the
   activity of the entity composing and thus deserves particularly
   careful confidentiality protection so that only the intended
   recipient of the message will receive the isComposing indication.

   Since the status messages are carried by using the IM protocol
   itself, all security considerations of the underlying IM protocol
   also apply to the isComposing status messages.

   There are potential privacy issues in sending isComposing status
   messages before an actual conversation has been established between
   the communicating users.  A status message may be sent even if the
   user later abandons the message.  It is RECOMMENDED that isComposing
   indications in page mode are only sent when a message is being
   composed as a reply to an earlier message.  This document does not
   prescribe how an implementation detects whether a message is in
   response to an earlier one in page mode, but elapsed time or user
   interface behavior might be used as hints.






Schulzrinne                 Standards Track                     [Page 9]


RFC 3994                      isComposing                   January 2005


8.  IANA Considerations

8.1.  Content-Type Registration for 'application/im-iscomposing+xml'

   To: ietf-types@iana.org
   Subject: Registration of MIME media type application/
      im-iscomposing+xml
   MIME media type name: application
   MIME subtype name: im-iscomposing+xml
   Required parameters: (none)
   Optional parameters: charset; Indicates the character encoding of
      enclosed XML.  Default is UTF-8.
   Encoding considerations: Uses XML, which can employ 8-bit characters,
      depending on the character encoding used.  See RFC 3023 [4],
      section 3.2.
   Security considerations: This content type is designed to carry
      information about current user activity, which may be considered
      private information.  Appropriate precautions should be adopted to
      limit disclosure of this information.
   Interoperability considerations: This content type provides a common
      format for exchange of composition activity information.
   Published specification: RFC 3994
   Applications which use this media type: Instant messaging systems.
   Additional information: none
   Person & email address to contact for further information: Henning
      Schulzrinne, hgs@cs.columbia.edu
   Intended usage: LIMITED USE
   Author/Change controller: This specification is a work item of the
      IETF SIMPLE working group, with the mailing list address
      simple@ietf.org.
   Other information: This media type is a specialization of
      application/xml RFC 3023 [4], and many of the considerations
      described there also apply to application/im-iscomposing+xml.


















Schulzrinne                 Standards Track                    [Page 10]


RFC 3994                      isComposing                   January 2005


8.2.  URN Sub-Namespace Registration for
      'urn:ietf:params:xml:ns:im-iscomposing'

   URI: urn:ietf:params:xml:ns:im-iscomposing
   Description: This is the XML namespace for XML elements defined by
      RFC 3994 to describe composition activity by an instant messaging
      client using the application/im-iscomposing+xml content type.
   Registrant Contact: IETF, SIMPLE working group, simple@ietf.org,
      Henning Schulzrinne, hgs@cs.columbia.edu
   XML:

    BEGIN
      <?xml version="1.0"?>
      <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML Basic 1.0//EN"
      "http://www.w3.org/TR/xhtml-basic/xhtml-basic10.dtd">
      <html xmlns="http://www.w3.org/1999/xhtml">
      <head>
           <meta http-equiv="content-type"
           content="text/html;charset=iso-8859-1"/>
           <title>Is-composing Indication for Instant Messaging</title>
      </head>
      <body>
          <h1>Namespace for SIMPLE iscomposing extension</h1>
          <h2>urn:ietf:params:xml:ns:im-composing</h2>
          <p>See <a href="[URL of published RFC]">RFC3994</a>.</p>
       </body>
       </html>
      END

8.3.  Schema Registration

   This section registers a new XML schema per the procedures in [5].

   URI: urn:ietf:params:xml:schema:im-composing
   Registrant Contact: IETF, SIMPLE working group, (simple@ietf.org),
      Henning Schulzrinne (hgs@cs.columbia.edu).

   The XML for this schema can be found as the sole content of Section
   6.1.

9.  Acknowledgements

   Ben Campbell, Miguel Garcia, Scott Hollenbeck, Christian Jansson,
   Cullen Jennings, Hisham Khartabil, Allison Mankin, Aki Niemi,
   Jonathan Rosenberg, and Xiaotao Wu provided helpful comments.






Schulzrinne                 Standards Track                    [Page 11]


RFC 3994                      isComposing                   January 2005


10.  References

10.1.  Normative References

   [1]  Day, M., Rosenberg, J., and H. Sugano, "A Model for Presence and
        Instant Messaging", RFC 2778, February 2000.

   [2]  Bradner, S., "Key words for use in RFCs to Indicate Requirement
        Levels", BCP 14, RFC 2119, March 1997.

   [3]  Klyne, G. and D. Atkins, "Common Presence and Instant Messaging
        (CPIM): Message Format", RFC 3862, August 2004.

   [4]  Murata, M., St. Laurent, S., and D. Kohn, "XML Media Types", RFC
        3023, January 2001.

   [5]  Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688, January
        2004.

10.2.  Informative References

   [6]  Sugano, H., Fujimoto, S., Klyne, G., Bateman, A., Carr, W., and
        J. Peterson, "Presence Information Data Format (PIDF)", RFC
        3863, August 2004.

   [7]  Rosenberg, J., "Advanced Instant Messaging Requirements for the
        Session Initiation Protocol  (SIP)", Work in Progress, February
        2004.

Author's Address

   Henning Schulzrinne
   Columbia University
   Department of Computer Science
   450 Computer Science Building
   New York, NY  10027
   US

   Phone: +1 212 939 7004
   EMail: hgs@cs.columbia.edu
   URI:   http://www.cs.columbia.edu/~hgs










Schulzrinne                 Standards Track                    [Page 12]


RFC 3994                      isComposing                   January 2005


Full Copyright Statement

   Copyright (C) The Internet Society (2005).

   This document is subject to the rights, licenses and restrictions
   contained in BCP 78, and except as set forth therein, the authors
   retain all their rights.

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
   ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
   INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
   INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Intellectual Property

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the IETF's procedures with respect to rights in IETF Documents can
   be found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at ietf-
   ipr@ietf.org.

Acknowledgement

   Funding for the RFC Editor function is currently provided by the
   Internet Society.







Schulzrinne                 Standards Track                    [Page 13]