[RFC Home] [TEXT|PDF|HTML] [Tracker] [IPR] [Info page]

PROPOSED STANDARD
Internet Engineering Task Force (IETF)                          J. Gould
Request for Comments: 8590                                VeriSign, Inc.
Category: Standards Track                                       K. Feher
ISSN: 2070-1721                                                  Neustar
                                                                May 2019


  Change Poll Extension for the Extensible Provisioning Protocol (EPP)

Abstract

   This document describes an Extensible Provisioning Protocol (EPP)
   extension for notifying clients of operations on client-sponsored
   objects that were not initiated by the client through EPP.  These
   operations may include contractual or policy requirements including,
   but not limited to, regular batch processes, customer support
   actions, Uniform Domain-Name Dispute-Resolution Policy (UDRP) or
   Uniform Rapid Suspension (URS) actions, court-directed actions, and
   bulk updates based on customer requests.  Since the client is not
   directly involved or knowledgable of these operations, the extension
   is used along with an EPP object mapping to provide the resulting
   state of the postoperation object, and optionally a preoperation
   object, with the operation metadata of what, when, who, and why.

Status of This Memo

   This is an Internet Standards Track document.

   This document is a product of the Internet Engineering Task Force
   (IETF).  It represents the consensus of the IETF community.  It has
   received public review and has been approved for publication by the
   Internet Engineering Steering Group (IESG).  Further information on
   Internet Standards is available in Section 2 of RFC 7841.

   Information about the current status of this document, any errata,
   and how to provide feedback on it may be obtained at
   https://www.rfc-editor.org/info/rfc8590.














Gould & Feher                Standards Track                    [Page 1]


RFC 8590                       changePoll                       May 2019


Copyright Notice

   Copyright (c) 2019 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (https://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   3
     1.1.  Conventions Used in This Document . . . . . . . . . . . .   3
   2.  Object Attributes . . . . . . . . . . . . . . . . . . . . . .   4
     2.1.  Operation . . . . . . . . . . . . . . . . . . . . . . . .   4
     2.2.  State . . . . . . . . . . . . . . . . . . . . . . . . . .   5
     2.3.  Who . . . . . . . . . . . . . . . . . . . . . . . . . . .   5
     2.4.  Dates and Times . . . . . . . . . . . . . . . . . . . . .   5
   3.  EPP Command Mapping . . . . . . . . . . . . . . . . . . . . .   6
     3.1.  EPP Query Commands  . . . . . . . . . . . . . . . . . . .   6
       3.1.1.  EPP <check> Command . . . . . . . . . . . . . . . . .   6
       3.1.2.  EPP <info> Command  . . . . . . . . . . . . . . . . .   6
       3.1.3.  EPP <transfer> Command  . . . . . . . . . . . . . . .  14
     3.2.  EPP Transform Commands  . . . . . . . . . . . . . . . . .  14
       3.2.1.  EPP <create> Command  . . . . . . . . . . . . . . . .  14
       3.2.2.  EPP <delete> Command  . . . . . . . . . . . . . . . .  14
       3.2.3.  EPP <renew> Command . . . . . . . . . . . . . . . . .  14
       3.2.4.  EPP <transfer> Command  . . . . . . . . . . . . . . .  14
       3.2.5.  EPP <update> Command  . . . . . . . . . . . . . . . .  14
   4.  Formal Syntax . . . . . . . . . . . . . . . . . . . . . . . .  15
     4.1.  Change Poll Extension Schema  . . . . . . . . . . . . . .  15
   5.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .  18
     5.1.  XML Namespace . . . . . . . . . . . . . . . . . . . . . .  18
     5.2.  EPP Extension Registry  . . . . . . . . . . . . . . . . .  18
   6.  Security Considerations . . . . . . . . . . . . . . . . . . .  19
   7.  References  . . . . . . . . . . . . . . . . . . . . . . . . .  19
     7.1.  Normative References  . . . . . . . . . . . . . . . . . .  19
     7.2.  Informative References  . . . . . . . . . . . . . . . . .  20
   Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . . .  20
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  20





Gould & Feher                Standards Track                    [Page 2]


RFC 8590                       changePoll                       May 2019


1.  Introduction

   This document describes an extension mapping for version 1.0 of the
   Extensible Provisioning Protocol (EPP) [RFC5730].  This mapping, an
   extension to EPP object mappings like the EPP domain name mapping
   [RFC5731], is used to notify clients of operations they are not
   directly involved in, on objects that the client sponsors.  It is up
   to server policy to determine what transform operations and clients
   to notify.  Using this extension, clients can more easily keep their
   systems in sync with the objects stored in the server.  When a change
   occurs that a client needs to be notified of, a poll message can be
   inserted by the server for consumption by the client using the EPP
   <poll> command and response defined in [RFC5730].  The extension
   supports including a "before" operation poll message and an "after"
   operation poll message.  The extension only extends the EPP <poll>
   response in [RFC5730] and does not extend the EPP <poll> command.
   Please refer to [RFC5730] for information and examples of the EPP
   <poll> command.

1.1.  Conventions Used in This Document

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in
   BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all
   capitals, as shown here.

   XML is case sensitive.  Unless stated otherwise, XML specifications
   and examples provided in this document MUST be interpreted in the
   character case presented in order to develop a conforming
   implementation.

   In examples, "C:" represents lines sent by a protocol client, and
   "S:" represents lines returned by a protocol server.  Indentation and
   white space in examples are provided only to illustrate element
   relationships and are not a REQUIRED feature of this protocol.

   The XML namespace prefix "changePoll" is used for the namespace
   "urn:ietf:params:xml:ns:changePoll-1.0", but implementations MUST NOT
   depend on it; instead, they should employ a proper namespace-aware
   XML parser and serializer to interpret and output the XML documents.










Gould & Feher                Standards Track                    [Page 3]


RFC 8590                       changePoll                       May 2019


2.  Object Attributes

   This extension adds additional elements to EPP object mappings like
   the EPP domain name mapping [RFC5731].  Only those new elements are
   described here.

2.1.  Operation

   An operation consists of any transform operation that impacts objects
   that the client sponsors and should be notified of.  The
   <changePoll:operation> element defines the operation.  The OPTIONAL
   "op" attribute is an identifier, represented in the 7-bit US-ASCII
   character set defined in [RFC20], that is used to define a sub-
   operation or the name of a "custom" operation.  The enumerated list
   of <changePoll:operation> values is:

   "create":  Create operation as defined in [RFC5730].

   "delete":  Delete operation as defined in [RFC5730].  If the delete
       operation results in an immediate purge of the object, then the
       "op" attribute MUST be set to "purge".

   "renew":  Renew operation as defined in [RFC5730].

   "transfer":  Transfer operation as defined in [RFC5730] that MUST set
       the "op" attribute with one of the possible transfer-type values;
       these include "request", "approve", "cancel", or "reject".

   "update":  Update operation as defined in [RFC5730].

   "restore":  Restore operation as defined in [RFC3915] that MUST set
       the "op" attribute with one of the possible restore-type values;
       these include "request" or "report".

   "autoRenew":  Auto renew operation executed by the server.

   "autoDelete":  Auto delete operation executed by the server.  If the
       "autoDelete" operation results in an immediate purge of the
       object, then the "op" attribute MUST be set to "purge".

   "autoPurge":  Auto purge operation executed by the server when
       removing the object after it has had the status "pendingDelete".

   "custom":  Custom operation that MUST set the "op" attribute with the
       custom operation name.  The custom operations supported are up to
       server policy.





Gould & Feher                Standards Track                    [Page 4]


RFC 8590                       changePoll                       May 2019


2.2.  State

   The state attribute reflects the state of the object "before" or
   "after" the operation.  The state is defined using the OPTIONAL
   "state" attribute of the <changePoll:changeData> element, with the
   possible values "before" or "after" and a default value of "after".
   The server MAY support both the "before" state and the "after" state
   of the operation by using one poll message for the "before" state and
   one poll message for the "after" state.  The "before" state poll
   message MUST be inserted into the message queue prior to the "after"
   state poll message.

   For operations in Section 2.1 that don't have an "after" state, the
   server MUST use the "before" state poll message.  For example, for
   the "delete" operation with the "op" attribute set to "purge", or the
   "autoPurge" operation, the server includes the state of the object
   prior to being purged in the "before" state poll message.

   For operations in Section 2.1 that don't have a "before" state, the
   server MUST use the "after" state poll message.  For example, for the
   "create" operation, the server includes the state of the object after
   creation in the "after" state poll message.

2.3.  Who

   The <changePoll:who> element defines who executed the operation, for
   audit purposes.  It is a free-form value that is meant strictly for
   audit purposes and not to drive client-side logic.  The scheme used
   for the possible set of <changePoll:who> element values is up to
   server policy.  The server MAY identify the <changePoll:who> element
   value based on:

   "Identifier":  Unique user identifier of the user that executed the
       operation.  An example is "ClientX".

   "Name":  Name of the user that executed the operation.  An example is
       "John Doe".

   "Role":  Role of the user that executed operation.  An example is
       "CSR" for a Customer Support Representative or "Batch" for a
       server batch.

2.4.  Dates and Times

   Date and time attribute values MUST be represented in Universal
   Coordinated Time (UTC) using the Gregorian calendar.  The extended
   date-time form using uppercase "T" and "Z" characters defined in




Gould & Feher                Standards Track                    [Page 5]


RFC 8590                       changePoll                       May 2019


   [W3C.REC-xmlschema-2-20041028] MUST be used to represent date-time
   values, as XML Schema does not support truncated date-time forms or
   lowercase "T" and "Z" characters.

3.  EPP Command Mapping

   A detailed description of the EPP syntax and semantics can be found
   in the EPP core protocol specification [RFC5730].

3.1.  EPP Query Commands

   EPP provides three commands to retrieve object information: <check>
   to determine if an object is known to the server, <info> to retrieve
   detailed information associated with an object, and <transfer> to
   retrieve object-transfer status information.

3.1.1.  EPP <check> Command

   This extension does not add any elements to the EPP <check> command
   or <check> response described in [RFC5730].

3.1.2.  EPP <info> Command

   This extension does not add any elements to the EPP <info> command
   described in [RFC5730].

   This extension adds operational detail of EPP object-mapping
   operations (Section 2.1) to an EPP poll response, as described in
   [RFC5730].  It is an extension of the EPP object-mapping info
   response.  Any transform operation to an object defined in an EPP
   object mapping by a client other than the sponsoring client MAY
   result in extending the <info> response of the object for inserting
   an EPP poll message with the operation detail.  The sponsoring client
   will then receive the state of the object with operation detail like
   what, who, when, and why the object was changed.  The
   <changePoll:changeData> element contains the operation detail along
   with an indication of whether the object reflects the state before or
   after the operation as defined in Section 2.2.  The
   <changePoll:changeData> element includes the operation detail with
   the following child elements:

   <changePoll:operation>:  Transform operation executed on the object,
       as defined in Section 2.1.

   <changePoll:date>:  Date and time when the operation was executed.

   <changePoll:svTRID>:  Server transaction identifier of the operation.




Gould & Feher                Standards Track                    [Page 6]


RFC 8590                       changePoll                       May 2019


   <changePoll:who>:  Who executed the operation, as defined in
       Section 2.3.

   <changePoll:caseId>:  OPTIONAL case identifier associated with the
       operation.  The required "type" attribute defines the type of
       case.  The OPTIONAL "name" attribute is an identifier,
       represented in the 7-bit US-ASCII character set defined in
       [RFC20], that is used to define the name of the "custom" case
       type.  The enumerated list of case types is:

       udrp:  A Uniform Domain-Name Dispute-Resolution Policy (UDRP)
          case.

       urs:  A Uniform Rapid Suspension (URS) case.

       custom:  A custom case that is defined using the "name"
          attribute.

   <changePoll:reason>:  OPTIONAL reason for executing the operation.
       If present, this element contains the server-specific text to
       help explain the reason the operation was executed.  This text
       MUST be represented in the response language previously
       negotiated with the client; an OPTIONAL "lang" attribute MAY be
       present to identify the language if the negotiated value is
       something other than the default value of "en" (English).

   The following is an example poll <info> response with the
   <changePoll:changeData> extension for a URS lock transaction on the
   domain.example domain name, with the "before" state.  The "before"
   state is reflected in the <resData> block:

   S:<?xml version="1.0" encoding="UTF-8"?>
   S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   S:   <response>
   S:      <result code="1301">
   S:         <msg lang="en-US">
   S:       Command completed successfully; ack to dequeue</msg>
   S:      </result>
   S:      <msgQ id="201" count="1">
   S:         <qDate>2013-10-22T14:25:57.0Z</qDate>
   S:         <msg>Registry initiated update of domain.</msg>
   S:      </msgQ>
   S:    <resData>
   S:      <domain:infData
   S:       xmlns:domain="urn:ietf:params:xml:ns:domain-1.0">
   S:        <domain:name>domain.example</domain:name>
   S:        <domain:roid>EXAMPLE1-REP</domain:roid>
   S:        <domain:status s="ok"/>



Gould & Feher                Standards Track                    [Page 7]


RFC 8590                       changePoll                       May 2019


   S:        <domain:registrant>jd1234</domain:registrant>
   S:        <domain:contact type="admin">sh8013</domain:contact>
   S:        <domain:contact type="tech">sh8013</domain:contact>
   S:        <domain:clID>ClientX</domain:clID>
   S:        <domain:crID>ClientY</domain:crID>
   S:        <domain:crDate>2012-04-03T22:00:00.0Z</domain:crDate>
   S:        <domain:exDate>2014-04-03T22:00:00.0Z</domain:exDate>
   S:      </domain:infData>
   S:    </resData>
   S:    <extension>
   S:      <changePoll:changeData
   S:        xmlns:changePoll="urn:ietf:params:xml:ns:changePoll-1.0"
   S:        state="before">
   S:        <changePoll:operation>update</changePoll:operation>
   S:        <changePoll:date>2013-10-22T14:25:57.0Z</changePoll:date>
   S:        <changePoll:svTRID>12345-XYZ</changePoll:svTRID>
   S:        <changePoll:who>URS Admin</changePoll:who>
   S:        <changePoll:caseId type="urs">urs123</changePoll:caseId>
   S:        <changePoll:reason>URS Lock</changePoll:reason>
   S:      </changePoll:changeData>
   S:    </extension>
   S:    <trID>
   S:      <clTRID>ABC-12345</clTRID>
   S:      <svTRID>54321-XYZ</svTRID>
   S:    </trID>
   S:   </response>
   S:</epp>

   The following is an example poll <info> response with the
   <changePoll:changeData> extension for a URS lock transaction on the
   domain.example domain name, with the "after" state.  The "after"
   state is reflected in the <resData> block:

   S:<?xml version="1.0" encoding="UTF-8"?>
   S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   S:   <response>
   S:      <result code="1301">
   S:         <msg lang="en-US">
   S:       Command completed successfully; ack to dequeue</msg>
   S:      </result>
   S:      <msgQ id="202" count="1">
   S:         <qDate>2013-10-22T14:25:57.0Z</qDate>
   S:         <msg>Registry initiated update of domain.</msg>
   S:      </msgQ>
   S:    <resData>
   S:      <domain:infData
   S:       xmlns:domain="urn:ietf:params:xml:ns:domain-1.0">
   S:        <domain:name>domain.example</domain:name>



Gould & Feher                Standards Track                    [Page 8]


RFC 8590                       changePoll                       May 2019


   S:        <domain:roid>EXAMPLE1-REP</domain:roid>
   S:        <domain:status s="serverUpdateProhibited"/>
   S:        <domain:status s="serverDeleteProhibited"/>
   S:        <domain:status s="serverTransferProhibited"/>
   S:        <domain:registrant>jd1234</domain:registrant>
   S:        <domain:contact type="admin">sh8013</domain:contact>
   S:        <domain:contact type="tech">sh8013</domain:contact>
   S:        <domain:clID>ClientX</domain:clID>
   S:        <domain:crID>ClientY</domain:crID>
   S:        <domain:crDate>2012-04-03T22:00:00.0Z</domain:crDate>
   S:        <domain:upID>ClientZ</domain:upID>
   S:        <domain:upDate>2013-10-22T14:25:57.0Z</domain:upDate>
   S:        <domain:exDate>2014-04-03T22:00:00.0Z</domain:exDate>
   S:      </domain:infData>
   S:    </resData>
   S:    <extension>
   S:      <changePoll:changeData
   S:        xmlns:changePoll="urn:ietf:params:xml:ns:changePoll-1.0"
   S:        state="after">
   S:        <changePoll:operation>update</changePoll:operation>
   S:        <changePoll:date>2013-10-22T14:25:57.0Z</changePoll:date>
   S:        <changePoll:svTRID>12345-XYZ</changePoll:svTRID>
   S:        <changePoll:who>URS Admin</changePoll:who>
   S:        <changePoll:caseId type="urs">urs123</changePoll:caseId>
   S:        <changePoll:reason>URS Lock</changePoll:reason>
   S:      </changePoll:changeData>
   S:    </extension>
   S:    <trID>
   S:      <clTRID>ABC-12345</clTRID>
   S:      <svTRID>54321-XYZ</svTRID>
   S:    </trID>
   S:   </response>
   S:</epp>

   The following is an example poll <info> response with the
   <changePoll:changeData> extension for a custom "sync" operation on
   the domain.example domain name, with the default "after" state.  The
   "after" state is reflected in the <resData> block:

   S:<?xml version="1.0" encoding="UTF-8"?>
   S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   S:   <response>
   S:      <result code="1301">
   S:         <msg>Command completed successfully; ack to dequeue</msg>
   S:      </result>
   S:      <msgQ id="201" count="1">
   S:         <qDate>2013-10-22T14:25:57.0Z</qDate>
   S:    <msg>Registry initiated Sync of Domain Expiration Date</msg>



Gould & Feher                Standards Track                    [Page 9]


RFC 8590                       changePoll                       May 2019


   S:      </msgQ>
   S:    <resData>
   S:      <domain:infData
   S:       xmlns:domain="urn:ietf:params:xml:ns:domain-1.0">
   S:        <domain:name>domain.example</domain:name>
   S:        <domain:roid>EXAMPLE1-REP</domain:roid>
   S:        <domain:status s="ok"/>
   S:        <domain:registrant>jd1234</domain:registrant>
   S:        <domain:contact type="admin">sh8013</domain:contact>
   S:        <domain:contact type="tech">sh8013</domain:contact>
   S:        <domain:clID>ClientX</domain:clID>
   S:        <domain:crID>ClientY</domain:crID>
   S:        <domain:crDate>2012-04-03T22:00:00.0Z</domain:crDate>
   S:        <domain:upID>ClientZ</domain:upID>
   S:        <domain:upDate>2013-10-22T14:25:57.0Z</domain:upDate>
   S:        <domain:exDate>2014-04-03T22:00:00.0Z</domain:exDate>
   S:      </domain:infData>
   S:    </resData>
   S:    <extension>
   S:      <changePoll:changeData
   S:        xmlns:changePoll="urn:ietf:params:xml:ns:changePoll-1.0">
   S:        <changePoll:operation op="sync">custom
   S:        </changePoll:operation>
   S:        <changePoll:date>2013-10-22T14:25:57.0Z</changePoll:date>
   S:        <changePoll:svTRID>12345-XYZ</changePoll:svTRID>
   S:        <changePoll:who>CSR</changePoll:who>
   S:        <changePoll:reason lang="en">Customer sync request
   S:        </changePoll:reason>
   S:      </changePoll:changeData>
   S:    </extension>
   S:    <trID>
   S:      <clTRID>ABC-12345</clTRID>
   S:      <svTRID>54321-XYZ</svTRID>
   S:    </trID>
   S:   </response>
   S:</epp>















Gould & Feher                Standards Track                   [Page 10]


RFC 8590                       changePoll                       May 2019


   The following is an example poll <info> response with the
   <changePoll:changeData> extension for a "delete" operation on the
   domain.example domain name that is immediately purged, with the
   "before" state.  The "before" state is reflected in the <resData>
   block:

   S:<?xml version="1.0" encoding="UTF-8"?>
   S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   S:  <response>
   S:    <result code="1301">
   S:      <msg>Command completed successfully; ack to dequeue</msg>
   S:    </result>
   S:    <msgQ id="200" count="1">
   S:      <qDate>2013-10-22T14:25:57.0Z</qDate>
   S:      <msg>Registry initiated delete of
   S:         domain resulting in immediate purge.</msg>
   S:    </msgQ>
   S:    <resData>
   S:      <domain:infData
   S:        xmlns:domain="urn:ietf:params:xml:ns:domain-1.0">
   S:        <domain:name>domain.example</domain:name>
   S:        <domain:roid>EXAMPLE1-REP</domain:roid>
   S:        <domain:clID>ClientX</domain:clID>
   S:      </domain:infData>
   S:    </resData>
   S:    <extension>
   S:      <changePoll:changeData
   S:        xmlns:changePoll="urn:ietf:params:xml:ns:changePoll-1.0"
   S:        state="before">
   S:        <changePoll:operation op="purge">delete
   S:        </changePoll:operation>
   S:        <changePoll:date>2013-10-22T14:25:57.0Z
   S:        </changePoll:date>
   S:        <changePoll:svTRID>12345-XYZ
   S:        </changePoll:svTRID>
   S:        <changePoll:who>ClientZ
   S:        </changePoll:who>
   S:        <changePoll:reason>Court order
   S:        </changePoll:reason>
   S:      </changePoll:changeData>
   S:    </extension>
   S:    <trID>
   S:      <clTRID>ABC-12345</clTRID>
   S:      <svTRID>54321-XYZ</svTRID>
   S:    </trID>
   S:  </response>
   S:</epp>




Gould & Feher                Standards Track                   [Page 11]


RFC 8590                       changePoll                       May 2019


   The following is an example poll <info> response with the
   <changePoll:changeData> extension for an "autoPurge" operation on the
   domain.example domain name that previously had the "pendingDelete"
   status, with the "before" state.  The "before" state is reflected in
   the <resData> block:

   S:<?xml version="1.0" encoding="UTF-8"?>
   S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   S:  <response>
   S:    <result code="1301">
   S:      <msg>Command completed successfully; ack to dequeue
   S:      </msg>
   S:    </result>
   S:    <msgQ id="200" count="1">
   S:      <qDate>2013-10-22T14:25:57.0Z</qDate>
   S:      <msg>Registry purged domain with pendingDelete status.
   S:      </msg>
   S:    </msgQ>
   S:    <resData>
   S:      <domain:infData
   S:        xmlns:domain="urn:ietf:params:xml:ns:domain-1.0">
   S:        <domain:name>domain.example</domain:name>
   S:        <domain:roid>EXAMPLE1-REP</domain:roid>
   S:        <domain:status s="pendingDelete"/>
   S:        <domain:clID>ClientX</domain:clID>
   S:      </domain:infData>
   S:    </resData>
   S:    <extension>
   S:      <changePoll:changeData
   S:        xmlns:changePoll="urn:ietf:params:xml:ns:changePoll-1.0"
   S:        state="before">
   S:        <changePoll:operation>autoPurge
   S:        </changePoll:operation>
   S:        <changePoll:date>2013-10-22T14:25:57.0Z
   S:        </changePoll:date>
   S:        <changePoll:svTRID>12345-XYZ
   S:        </changePoll:svTRID>
   S:        <changePoll:who>Batch
   S:        </changePoll:who>
   S:        <changePoll:reason>Past pendingDelete 5 day period
   S:        </changePoll:reason>
   S:      </changePoll:changeData>
   S:    </extension>
   S:    <trID>
   S:      <clTRID>ABC-12345</clTRID>
   S:      <svTRID>54321-XYZ</svTRID>
   S:    </trID>




Gould & Feher                Standards Track                   [Page 12]


RFC 8590                       changePoll                       May 2019


   S:  </response>
   S:</epp>

   The following is an example poll <info> response with the
   <changePoll:changeData> extension for an "update" operation on the
   ns1.domain.example host, with the default "after" state.  The "after"
   state is reflected in the <resData> block:

   S:<?xml version="1.0" encoding="UTF-8"?>
   S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   S:   <response>
   S:      <result code="1301">
   S:         <msg>Command completed successfully; ack to dequeue</msg>
   S:      </result>
   S:      <msgQ id="201" count="1">
   S:         <qDate>2013-10-22T14:25:57.0Z</qDate>
   S:         <msg>Registry initiated update of host.</msg>
   S:      </msgQ>
   S:    <resData>
   S:      <host:infData
   S:       xmlns:host="urn:ietf:params:xml:ns:host-1.0">
   S:        <host:name>ns1.domain.example</host:name>
   S:        <host:roid>NS1_EXAMPLE1-REP</host:roid>
   S:        <host:status s="linked"/>
   S:        <host:status s="serverUpdateProhibited"/>
   S:        <host:status s="serverDeleteProhibited"/>
   S:        <host:addr ip="v4">192.0.2.2</host:addr>
   S:        <host:addr ip="v6">2001:db8:0:0:1:0:0:1</host:addr>
   S:        <host:clID>ClientX</host:clID>
   S:        <host:crID>ClientY</host:crID>
   S:        <host:crDate>2012-04-03T22:00:00.0Z</host:crDate>
   S:        <host:upID>ClientY</host:upID>
   S:        <host:upDate>2013-10-22T14:25:57.0Z</host:upDate>
   S:      </host:infData>
   S:    </resData>
   S:    <extension>
   S:      <changePoll:changeData
   S:        xmlns:changePoll="urn:ietf:params:xml:ns:changePoll-1.0">
   S:        <changePoll:operation>update</changePoll:operation>
   S:        <changePoll:date>2013-10-22T14:25:57.0Z</changePoll:date>
   S:        <changePoll:svTRID>12345-XYZ</changePoll:svTRID>
   S:        <changePoll:who>ClientZ</changePoll:who>
   S:        <changePoll:reason>Host Lock</changePoll:reason>
   S:      </changePoll:changeData>
   S:    </extension>
   S:    <trID>
   S:      <clTRID>ABC-12345</clTRID>
   S:      <svTRID>54321-XYZ</svTRID>



Gould & Feher                Standards Track                   [Page 13]


RFC 8590                       changePoll                       May 2019


   S:    </trID>
   S:   </response>
   S:</epp>

3.1.3.  EPP <transfer> Command

   This extension does not add any elements to the EPP <transfer> query
   command or <transfer> response described in the [RFC5730].

3.2.  EPP Transform Commands

   EPP provides five commands to transform objects: <create> to create
   an instance of an object, <delete> to delete an instance of an
   object, <renew> to extend the validity period of an object,
   <transfer> to manage object-sponsorship changes, and <update> to
   change information associated with an object.

3.2.1.  EPP <create> Command

   This extension does not add any elements to the EPP <create> command
   or <create> response described in [RFC5730].

3.2.2.  EPP <delete> Command

   This extension does not add any elements to the EPP <delete> command
   or <delete> response described in [RFC5730].

3.2.3.  EPP <renew> Command

   This extension does not add any elements to the EPP <renew> command
   or <renew> response described in [RFC5730].

3.2.4.  EPP <transfer> Command

   This extension does not add any elements to the EPP <transfer>
   command or <transfer> response described in [RFC5730].

3.2.5.  EPP <update> Command

   This extension does not add any elements to the EPP <update> command
   or <update> response described in [RFC5730].










Gould & Feher                Standards Track                   [Page 14]


RFC 8590                       changePoll                       May 2019


4.  Formal Syntax

   One schema is presented here: the EPP Change Poll Extension schema.

   The formal syntax presented here is a complete schema representation
   of the object mapping suitable for automated validation of EPP XML
   instances.  The BEGIN and END tags are not part of the schema; they
   are used to note the beginning and ending of the schema for URI
   registration purposes.

4.1.  Change Poll Extension Schema

   BEGIN
   <?xml version="1.0" encoding="UTF-8"?>
    <schema targetNamespace="urn:ietf:params:xml:ns:changePoll-1.0"
            xmlns:eppcom="urn:ietf:params:xml:ns:eppcom-1.0"
            xmlns:epp="urn:ietf:params:xml:ns:epp-1.0"
            xmlns:changePoll="urn:ietf:params:xml:ns:changePoll-1.0"
            xmlns="http://www.w3.org/2001/XMLSchema"
            elementFormDefault="qualified">

     <!--
     Import common element types.
     -->
     <import namespace="urn:ietf:params:xml:ns:eppcom-1.0"/>
     <import namespace="urn:ietf:params:xml:ns:epp-1.0"/>


      <annotation>
        <documentation>
          Extensible Provisioning Protocol v1.0
          Change Poll Mapping Schema.
        </documentation>
      </annotation>

      <!--
       Change element.
      -->
      <element name="changeData" type="changePoll:changeDataType"/>

      <!--
       Attributes associated with the change.
      -->
      <complexType name="changeDataType">
        <sequence>
          <element name="operation" type="changePoll:operationType"/>
          <element name="date" type="dateTime"/>
          <element name="svTRID" type="epp:trIDStringType"/>



Gould & Feher                Standards Track                   [Page 15]


RFC 8590                       changePoll                       May 2019


          <element name="who" type="changePoll:whoType"/>
          <element name="caseId" type="changePoll:caseIdType"
            minOccurs="0"/>
          <element name="reason" type="eppcom:reasonType"
            minOccurs="0"/>
        </sequence>
       <attribute name="state" type="changePoll:stateType"
         default="after"/>
      </complexType>

      <!--
       Enumerated list of operations, with extensibility via "custom".
      -->
      <simpleType name="operationEnum">
        <restriction base="token">
          <enumeration value="create"/>
          <enumeration value="delete"/>
          <enumeration value="renew"/>
          <enumeration value="transfer"/>
          <enumeration value="update"/>
          <enumeration value="restore"/>
          <enumeration value="autoRenew"/>
          <enumeration value="autoDelete"/>
          <enumeration value="autoPurge"/>
          <enumeration value="custom"/>
        </restriction>
      </simpleType>

      <!--
       Enumerated state of the object in the poll message.
      -->
      <simpleType name="stateType">
        <restriction base="token">
          <enumeration value="before"/>
          <enumeration value="after"/>
        </restriction>
      </simpleType>

      <!--
       Transform operation type
      -->
     <complexType name="operationType">
       <simpleContent>
         <extension base="changePoll:operationEnum">
           <attribute name="op" type="token"/>
         </extension>
       </simpleContent>
     </complexType>



Gould & Feher                Standards Track                   [Page 16]


RFC 8590                       changePoll                       May 2019


      <!--
       Case identifier type
      -->
     <complexType name="caseIdType">
       <simpleContent>
         <extension base="token">
           <attribute name="type" type="changePoll:caseTypeEnum"
             use="required"/>
           <attribute name="name" type="token"
             use="optional"/>
         </extension>
       </simpleContent>
     </complexType>

      <!--
       Enumerated list of case identifier types
      -->
      <simpleType name="caseTypeEnum">
        <restriction base="token">
          <enumeration value="udrp"/>
          <enumeration value="urs"/>
          <enumeration value="custom"/>
        </restriction>
      </simpleType>

      <!--
       Who type
      -->
     <simpleType name="whoType">
       <restriction base="normalizedString">
         <minLength value="1"/>
         <maxLength value="255"/>
       </restriction>
     </simpleType>

    <!--
    End of schema.
    -->
    </schema>
   END











Gould & Feher                Standards Track                   [Page 17]


RFC 8590                       changePoll                       May 2019


5.  IANA Considerations

5.1.  XML Namespace

   This document uses URNs to describe XML namespaces and XML schemas
   conforming to a registry mechanism described in [RFC3688].  The
   following URI assignment has been made by IANA:

   Registration for the changePoll namespace:

      URI: urn:ietf:params:xml:ns:changePoll-1.0

      Registrant Contact: IESG

      XML: None.  Namespace URIs do not represent an XML specification.

   Registration for the changePoll XML schema:

      URI: urn:ietf:params:xml:ns:changePoll-1.0

      Registrant Contact: IESG

      XML: See the "Formal Syntax" section of this document.

5.2.  EPP Extension Registry

   The EPP extension described in this document has been registered by
   the IANA in the Extensions for the "Extensible Provisioning Protocol
   (EPP)" registry described in [RFC7451].  The details of the
   registration are as follows:

   Name of Extension: Change Poll Extension for the Extensible
   Provisioning Protocol (EPP)

   Document Status: Standards Track

   Reference: RFC 8590

   Registrant Name and Email Address: IESG <iesg@ietf.org>

   TLDs: Any

   IPR Disclosure: None

   Status: Active

   Notes: None




Gould & Feher                Standards Track                   [Page 18]


RFC 8590                       changePoll                       May 2019


6.  Security Considerations

   The mapping extensions described in this document do not provide any
   security services beyond those described by EPP [RFC5730] and
   protocol layers used by EPP.  The security considerations described
   in these other specifications apply to this specification as well.

7.  References

7.1.  Normative References

   [RFC20]    Cerf, V., "ASCII format for network interchange", STD 80,
              RFC 20, DOI 10.17487/RFC0020, October 1969,
              <https://www.rfc-editor.org/info/rfc20>.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <https://www.rfc-editor.org/info/rfc2119>.

   [RFC3688]  Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688,
              DOI 10.17487/RFC3688, January 2004,
              <https://www.rfc-editor.org/info/rfc3688>.

   [RFC3915]  Hollenbeck, S., "Domain Registry Grace Period Mapping for
              the Extensible Provisioning Protocol (EPP)", RFC 3915,
              DOI 10.17487/RFC3915, September 2004,
              <https://www.rfc-editor.org/info/rfc3915>.

   [RFC5730]  Hollenbeck, S., "Extensible Provisioning Protocol (EPP)",
              STD 69, RFC 5730, DOI 10.17487/RFC5730, August 2009,
              <https://www.rfc-editor.org/info/rfc5730>.

   [RFC5731]  Hollenbeck, S., "Extensible Provisioning Protocol (EPP)
              Domain Name Mapping", STD 69, RFC 5731,
              DOI 10.17487/RFC5731, August 2009,
              <https://www.rfc-editor.org/info/rfc5731>.

   [RFC8174]  Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
              2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
              May 2017, <https://www.rfc-editor.org/info/rfc8174>.

   [W3C.REC-xmlschema-2-20041028]
              Biron, P. and A. Malhotra, "XML Schema Part 2: Datatypes
              Second Edition", World Wide Web Consortium Recommendation
              REC-xmlschema-2-20041028, October 2004,
              <http://www.w3.org/TR/2004/REC-xmlschema-2-20041028>.




Gould & Feher                Standards Track                   [Page 19]


RFC 8590                       changePoll                       May 2019


7.2.  Informative References

   [RFC7451]  Hollenbeck, S., "Extension Registry for the Extensible
              Provisioning Protocol", RFC 7451, DOI 10.17487/RFC7451,
              February 2015, <https://www.rfc-editor.org/info/rfc7451>.

Acknowledgments

   The authors wish to acknowledge the original concept for this
   document and the efforts in the initial versions of this document by
   Trung Tran and Sharon Wodjenski.

   Special suggestions that have been incorporated into this document
   were provided by Scott Hollenbeck, Michael Holloway, and Patrick
   Mevzek.

Authors' Addresses

   James Gould
   VeriSign, Inc.
   12061 Bluemont Way
   Reston, VA  20190
   United States of America

   Email: jgould@verisign.com
   URI:   http://www.verisign.com


   Kal Feher
   Neustar
   lvl 8/10 Queens Road
   Melbourne, VIC  3004
   Australia

   Email: ietf@feherfamily.org
   URI:   http://www.neustar.biz















Gould & Feher                Standards Track                   [Page 20]